Square D HOM4080M200PQC User guide

Type
User guide

Square D HOM4080M200PQC is a Homeline Qwik-Grip Plug-on Neutral load center with cover and factory-included Qwik-Grip Assembly Kit. It has a 200 A main circuit breaker with a 22kA short circuit current rating. The Qwik-Grip wire management system eliminates the need for most knock-outs and romex connectors, and feeds from the front making wire management easy to see. The retaining clip snaps in place for secure wire retention. This load center is great for new construction, remodels, or service upgrades. It is UL Listed.

Square D HOM4080M200PQC is a Homeline Qwik-Grip Plug-on Neutral load center with cover and factory-included Qwik-Grip Assembly Kit. It has a 200 A main circuit breaker with a 22kA short circuit current rating. The Qwik-Grip wire management system eliminates the need for most knock-outs and romex connectors, and feeds from the front making wire management easy to see. The retaining clip snaps in place for secure wire retention. This load center is great for new construction, remodels, or service upgrades. It is UL Listed.

Homeline Plug-on Neutral
Load Centers with Qwik-Grip
Wire Management System
Square D Homeline Plug-on Neutral Load Centers with Qwik-Grip
Electrical contractors will appreciate not having to remove knockouts, install
wire connectors and blindly pull wire into the load center versus the ability
to slide wires from the front with the Qwik-Grip wire management system. A
quick bend of the wire using the wire bend guide on the Qwik-Grip insert and
the wire easily slides into the slot. Once done, snap on the Qwik-Grip shield
to keep the wires behind the router for a secure, code compliant installation.
Qwik-Grip, a state of the art wire management system, allowing you to move
on the next job quicker.
Features and benets of Plug-on Neutral Load Centers with Qwik-Grip
Wire Management System
Feature Benet
Qwik-Grip
advantage
Simple, easy to use and speeds up installation time
Eliminates the need for most knock-outs and romex
connectors, and feeds from the front making wire
management easy to see
Retaining clip snaps in place for secure wire retention
Homeline Plug-on Neutral Load
Centers with Qwik-Grip provides:
Easy to use wire management system
Simplies NM-B wire installation
Speeds up rough-ins
Accommodate more wires than knockout
end-walls
Great for new construction, remodels or
service upgrades
UL Listed
www.schneider-electric.us/QG
Qwik-Grip Wire
Management System
Document Number 1170HO1701 ©2017 Schneider Electric. All Rights Reserved. Schneider Electric, Life Is On Schneider Electric, Square D and Homeline are
trademarks owned by Schneider Electric SE, its subsidiaries and affiliated companies. All other trademarks are property of their respective owners.
Schneider Electric
800 Federal Street
Andover, MA 01810
888 SQUARED (888-778-2733)
www.schneider-electric.us/qg
Homeline Plug-on Neutral Load Centers with Qwik-Grip Wire Management System
Installation is fast and easy with Qwik-Grip
STEP
1
STEP
2
STEP
3
Remove the needed Qwiklet tabs Snap on the Qwik-Grip shield when
all circuits are installed
Slide the wire into the slot
Qwik-Grip
Catalog Numbers
Mains
Rating
Spaces
Max. 1P
Circuits
Description
Convertible Mains – Factory-Installed Main Lugs – 10kA Short Circuit Rating – QOM1 Main Frame Size,
Convertible to Main Breaker
HOM2448L125PQGC
125 A
24 48
(1) Homeline Qwik-Grip Plug-on Neutral load center with cover and factory-included
(1) PKGTALP2 Ground bar pack with 2/0 lug kit, and (1) PKQGA Qwik-Grip Assembly Kit
HOM3060L125PQGC 30 60
(1) Homeline Qwik-Grip Plug-on Neutral load center with cover and factory-included
(1) PKGTALP2 Ground bar pack with 2/0 lug kit, and (1) PKQGA Qwik-Grip Assembly Kit
Convertible Mains – Factory-Installed Main Lugs – 10kA Short Circuit Rating – QOM2 Main Frame Size,
Convertible to Main Breaker
HOM3060L225PQGC
225 A
30 60
(1) Homeline Qwik-Grip Plug-on Neutral load center with cover and factory-included
(1) PKGTALP2 Ground bar pack with 2/0 lug kit, and (1) PKQGA Qwik-Grip Assembly Kit
HOM4080L225PQGC 40 80
(1) Homeline Qwik-Grip Plug-on Neutral load center with cover and factory-included
(1) PKGTALP3 Ground bar pack with 2/0 lug kit, and (1) PKQGA Qwik-Grip Assembly Kit
HOM4284L225PQGC 42
84
(1) Homeline Qwik-Grip Plug-on Neutral load center with cover and factory-included
(1) PKGTALP3 Ground bar pack with 2/0 lug kit, and (1) PKQGA Qwik-Grip Assembly Kit
Convertible Mains – Factory-Installed Main Circuit Breaker – 22kA Short Circuit Current Rating –
QOM1 Main Circuit Breaker Frame Size, Convertible to Main Lugs or Main Circuit Breaker
HOM2040M100PQCVP 100 A 20 40
(1) Homeline Qwik-Grip Plug-on Neutral load center with cover and factory-included
(2) HOM120, (1) HOM230 and (1) PKQGA Qwik-Grip Assembly Kit
Convertible Mains – Factory-Installed Main Circuit Breaker – 22kA Short Circuit Current Rating –
QOM2 Main Circuit Breaker Frame Size, Convertible to Main Lugs or Main Circuit Breaker
HOM3060M200PQC
200 A
30 60
(1) Homeline Qwik-Grip Plug-on Neutral load center with cover and factory-included
(1) PKQGA Qwik-Grip Assembly Kit
HOM3060M200PQCVP
(1) Homeline Qwik-Grip Plug-on Neutral load center with cover and factory-included
(3) HOM120, (2) HOM230, and (1) PKQGA Qwik-Grip Assembly Kit
HOM4080M200PQC
40 80
(1) Homeline Qwik-Grip Plug-on Neutral load center with cover and factory-included
(1) PKQGA Qwik-Grip Assembly Kit
HOM4080M200PQCVP
(1) Homeline Qwik-Grip Plug-on Neutral load center with cover and factory-included
(3) HOM120, (2) HOM230, and (1) PKQGA Qwik-Grip Assembly Kit
HOM4284M200PQC 42
84
(1) Homeline Qwik-Grip Plug-on Neutral load center with cover and factory-included
(1) PKQGA Qwik-Grip Assembly Kit
Catalog Number Name Description
Accessories
PKQGS Qwik-Grip replacement Shield (1) Qwik-Grip shield
PKQGFP Qwik-Grip llers (12) Qwik-Grip Fillers
PKQGI Qwik-Grip replacement insert (1) Qwik-Grip insert
PKQGA Qwik-Grip Assembly Kit (4) Qwik-Grip shields, (12) Qwik-Grip llers
Support – 888-SQUARED
  • Page 1 1
  • Page 2 2

Square D HOM4080M200PQC User guide

Type
User guide

Square D HOM4080M200PQC is a Homeline Qwik-Grip Plug-on Neutral load center with cover and factory-included Qwik-Grip Assembly Kit. It has a 200 A main circuit breaker with a 22kA short circuit current rating. The Qwik-Grip wire management system eliminates the need for most knock-outs and romex connectors, and feeds from the front making wire management easy to see. The retaining clip snaps in place for secure wire retention. This load center is great for new construction, remodels, or service upgrades. It is UL Listed.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI