Automotive Products Division
1040 Avenida Acaso • Camarillo, CA 93012, U.S.A.
USA Sales (800) 336-6500
Canada Sales (888) 922-3006 • USA Fax (805) 388-7950
For information about other American International automotive
accessories visit our website at:
http://www.americaninternational.net
CUSTOMER HELP LINE
USA 800-323-4329 • Canada 800-245-8777
©2011 AMERICAN INTERNATIONAL INDUSTRIES, INC.
Ver. 2/11
HYN-K1134 Mounting Kit
Hyundai
2007-10 ELANTRA (with factory installed radio)
VEHICLE APPLICATIONS
iHYNK1134
NOTES:
BRACKET PREPARATION
HYUNDAI ELANTRA
1. Carefully remove the panel covering the radio and vents.
2. Disconnect any wire harnesses attached to dash bezel.
3. Remove the (4) Philips screws securing the radio in the sub dash.
4. Carefully remove factory radio and set aside.
DASH DISASSEMBLY
2007-10 HYUNDAI ELANTRA
1. Slide the brackets onto the kit and lock into the pocket.
2. Attach the brackets to the pocket with the screws supplied.
3. This kit is an (ISO) mounting kit only.
4. ISO mounting is using the brackets and trim ring supplied with the installation kit.
5. The mounting sleeve and trim ring are not required when ISO mounting an
aftermarket radio.
6. Slide the new radio in starting from the back to the front of the kit.
7. After desired look is found secure the radio to the brackets with the screws supplied.
KIT ASSEMBLY
2
007-10 HYUNDAI ELANTRA
1. Philips screwdriver
2. Plastic panel removal tool (optional)
3. Wire strippers and crimpers.
TOOLS REQUIRED
2 3
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Metra Electronics 99-7326 User manual
-
Metra Electronics 95-7332 User manual
-
Metra Electronics 95-7326 User manual
-
Metra Electronics 99-7308 User manual
-
Metra Electronics 95-7313 User manual
-
Hyundai 2013 Santa Fe Owner's Handbook Manual
-
-
-
-
Draw-Tite 24795 Installation guide
