DeWitt Products 611-C Operating instructions

Brand
DeWitt Products
Model
611-C
Type
Operating instructions

DeWitt Products 611-C can be used on both wet and dry surfaces, and it is an excellent all-purpose cement for repairs of all flashings and sealing in roofs. You can also use it on brick siding, gutters, glass, marble, stone, cement, metal roofs, stone coping, etc.

Here are some of the features of DeWitt Products 611-C:

  • Meets ASTM 4586-86 and Federal Specification SS-C-153C ASTM D-2822 Type I
  • Weight per gal. (approx): 9 lbs.
  • Flash point (ASTM 093-52): 100° F Min
  • Drying time: 2-3 days, depending on weather conditions
  • Viscosity at 80° F: Medium to heavy trowel

DeWitt Products 611-C can be used on both wet and dry surfaces, and it is an excellent all-purpose cement for repairs of all flashings and sealing in roofs. You can also use it on brick siding, gutters, glass, marble, stone, cement, metal roofs, stone coping, etc.

Here are some of the features of DeWitt Products 611-C:

  • Meets ASTM 4586-86 and Federal Specification SS-C-153C ASTM D-2822 Type I
  • Weight per gal. (approx): 9 lbs.
  • Flash point (ASTM 093-52): 100° F Min
  • Drying time: 2-3 days, depending on weather conditions
  • Viscosity at 80° F: Medium to heavy trowel
PRODUCT DESCRIPTION:
DEWITT’S #99 WET-STICK ROOF CAULK is an all-
purpose patching cement manufactured with specially
blended asphalts, refined oils and mineral stabilizers,
reinforced with hi-tech, asbestos-free fibers. DEWITT’S
#99 WET-STICK ROOF CAULK sets up to form a
tough, continuous, moisture-proof film that will retain its
pliability for a long period of time. This enables it to
expand and to conform to movement of other materials.
DEWITT’S #99 WET-STICK ROOF CAULK can be
used on wet or dry surfaces.
USES:
DEWITT’S #99 WET-STICK ROOF CAULK is an excellent all-purpose cement
for repairs of all flashings and sealing in roofs. DEWITT’S #99 WET-STICK
ROOF CAULK can also be used on brick siding, gutters, glass, marble, stone,
cement, metal roofs, stone coping, etc..
APPLICATION:
DEWITT’S # 99 WET-STICK CAULK is used directly from the tube. Surface
must be free of dirt, dust, and debris. Apply with a caulking gun to surface.
Application on wet surface requires cement to be worked into surface for best
results.
SPECIFICATIONS:
Meets ASTM 4586-86 and Federal Specification SS-C-153C ASTM D-2822
Type I, except this material is asbestos free.
PHYSICAL CHARACTERISTICS:
Weight per gal. (approx)
Flash point (ASTM 093-52)
Drying time
Viscosity at 80° F
9 lbs.
100° F Min
2-3 days, depending on weather
conditions
Medium to heavy trowel
Service temperature, extended
exposure
Resistance to oils and solvents
Resistance to sunlight
Resistance to chemicals
Effects of weathering
Water Resistance
Under draining conditions
Under continuous submersion
Restrictions
Clean up
Application temperature
-40° to 180° F
Poor
Excellent
Excellent
Minimal
Excellent
Fair
Do not use on tar roofs
Mineral Spirits or DEWITT’S REMOVE-IT
25°-100° F
COVERAGE:
One gallon covers approximately 7 sq. ft. at 1/4" thick.
PACKAGING:
10.3 oz & 29 oz cartridges
CAUTION:
Combustible: Keep away from heat and open flame. Close container after each
use. Keep out of reach of children. Do not induce vomiting. Harmful if
swallowed.
Dewitt Products Co.▪ 5860 Plumer ▪ Detroit, MI 48209 ▪ www.dewittproducts.com ▪ (800)962-8599 Fax (313)554-2171
  • Page 1 1
  • Page 2 2

DeWitt Products 611-C Operating instructions

Brand
DeWitt Products
Model
611-C
Type
Operating instructions

DeWitt Products 611-C can be used on both wet and dry surfaces, and it is an excellent all-purpose cement for repairs of all flashings and sealing in roofs. You can also use it on brick siding, gutters, glass, marble, stone, cement, metal roofs, stone coping, etc.

Here are some of the features of DeWitt Products 611-C:

  • Meets ASTM 4586-86 and Federal Specification SS-C-153C ASTM D-2822 Type I
  • Weight per gal. (approx): 9 lbs.
  • Flash point (ASTM 093-52): 100° F Min
  • Drying time: 2-3 days, depending on weather conditions
  • Viscosity at 80° F: Medium to heavy trowel
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents