1 ACAP19-01
SWITCHING AC ADAPTER (19VDC 3.42A)
ACAP19-01 User’s Guide
CONTEC CO.,LTD.
Thank you for purchasing this product.
This product is the AC adapter for input: 100 - 240VAC and output: +19VDC 3.42A. This product can
be used for the CONTEC’s following models. (It is not possible to use it excluding the target model.)
- ACAP19-01
BOX Computer: BX-2x0-DCxxxx, BX-2x0D-DCxxxx, IPC-BX955D-DCxxx, BX-955Sx-DC6xxx,
BX-220D-DCxxxxxx
Digital Signage Player: DS-2x0D-DCxxxx-M0x
Package Contents
The product you have purchased consists of the following items. Be sure that you have them all. If you
find any item either missing or damaged, please contact the sales representative you purchased the
product from.
ACAP19-01
Name
Pcs.
AC adapter
1
AC power cable (100VAC, 3pin) *1*2
1
User
’
s Guide
(this document)
1
Warranty Certificate
1
Serial number label
1
*1 This AC power cable is for the voltage of the 100VAC or less.
In the case that the voltage that this cable uses do not match you need to prepare other cable particularly.
*2 Do not use this AC power cable with any devices except for an attached AC adapter.
AC power cable
(100VAC, 3pin)
AC adapter User's Guide
(this document)
Warranty
Certificate
XX XXXXXX XX X XX
XX XXXXXX XX X XX
Serial
number label
Warranty
Certificate
Using method
- Make sure that the AC power cable is not plugged into a wall outlet.
- Connect the AC power cable to the main body of AC adaptor connector (CN1).
- Connect the DC cable of AC adaptor with the DC power supply connector.
- Plug the AC power cable into a wall outlet.
* This product has no power switch. When turning off, unplug the AC power cable from the wall
outlet.
ACAP19-01
User’s Guide
ACAP19-01
2
Specifications
Requirement
Description
Power supply space
Rated input voltage
100VAC to 240VAC (continuous input), 50 to 60Hz
Permissible input voltage
90VAC to 264VAC (continuous input), 50 to 60Hz
Input current
1.7A Max. (AC IN 90V)
Rated output voltage
+19VDC 5%
Rated output current
3.42A (Max.)
Permissible momentary blackout
5ms or less
Dielectric strength (between Input P and S)
3.0kVAC for one minute
Insulation resistance (between P and S)
Greater than 20M (500VDC)
Environmental specs
Temperature
Operating : 0 to 40 C, non operating:
-
25 to + 70 C
Humidity
Operating : 20 to 80%RH (No condensation)
Non operating : 10 to 90%RH (No condensation)
Floating dust particles
Not to be excessive
Corrosive gases
None
Vibration resistance
10 to 60Hz / 0.5G
Noise resistance
Line noise
AC line / ±1kV
Static electricity
resistance
Contact discharge / ±4kV (IEC61000-4-2 Level 2)
Atmospheric discharge / ±4kV (IEC61000-4-2 Level 2)
Construction
Length of cable
AC Power cable: 1.8m, DC cable: 1.2m
External dimensions (mm)
46 (W) x 108 (D) x 30 (H) (not include projection of cable)
Weight
Main body: 210g, AC power cable: 180g
MTBF *1
60,000H (temperature 25 C)
Longevity *1
12,000H (temperature 25 C)
*1 Estimates of MTBF and Longevity are not guaranteed but are for reference only.
External Dimensions and Component Identification
ACAP19-01
User’s Guide
3 ACAP19-01
Usage environment
It is expected that you will use this product in a comparatively good environment.
If you will use it in a harsh environment or if you require a long service life from it, we ask that you
separately prepare a power supply that fits your application.
If the AC adapter fails, CONTEC will replace it with an equivalent product (a charge may be applied to
the replacement).
Also, note that we cannot provide analyses of failure causes.
Disposal
When disposing of the product, follow the disposal procedures stipulated under the relevant laws and
municipal ordinances.
Storage
When storing this product, keep it in its original packing form.
- Wrap it in the packing material, and then put it in the box.
- Store the package at room temperature at a place free from direct sunlight, moisture, shock,
vibration, magnetism, and static electricity.
Handling Precautions
WARNING
Indicates dos and don'ts that are assumed to result in possible death or serious injury if they are
inappropriately handled ignoring this icon.
- Do not use the product in locations exposed to a flammable or corrosive gas. It may cause explosion,
fire, electrical shock, or malfunction.
- If you sense abnormality (smoke, odor, or noise), immediately unplug the power cord from the wall
outlet and contact the CONTEC sales representative or sales office.
- To avoid electrocution do not use the product with a wet hand.
- Be sure to connect the product to the stipulated power supply voltage. Connecting to a different
voltage might cause a fire or electrical shock.
- Do not use the product with the other power device. It may cause fire or malfunction.
- When the cable or main body is damaged, stop using and repair it immediately. Using it as it is may
cause fire, electrical shock or malfunction.
- Never disassemble or modify the product or replace its parts in order to prevent electrical shock,
fire, or malfunction. CONTEC reserves the right to refuse servicing the product modified by the
user. When any part of the product needs to be replaced at the expiration of its life or due to
breakdown, please contact the CONTEC sales representative or sales office.
- Use the product with the specified models by the CONTEC. Not doing so may cause fire or
malfunction.
- Use the product in the specified operating condition (temperature and humidity)
ACAP19-01
User's Guide
CONTEC CO.,LTD. October 2014 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/
English http://www.contec.com/ NA01546 (LYNG125)
Chinese http://www.contec.com.cn/ 10142014_rev5 [08082011]
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
CAUTION
Indicates dos and don'ts that are assumed to result in possible injury or property damage if they are
inappropriately handled ignoring this icon.
- Do not use or store the product in a location exposed to extremely high or low temperature or
susceptible to a rapid temperature change. Example:
- Exposure to direct sun - In the vicinity of a heat source
- When unplugging the cable, hold the plug. Holding and pulling the cable itself can cause a failure
such as discontinuity.
- To clean the product wipe it gently with soft cloth damp with either water or mild detergent.
Do not use chemicals or a volatile solvent, such as benzene and thinner, to prevent peeling or
discoloration of the paint.
- When transporting the product, provide adequate measures to protect it from vibration or shock.
- No part of this document may be copied or reproduced in any form by any means without prior
written consent of CONTEC CO., LTD.
- The information in this document is subject to change without notice.
- All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.
- Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for results obtained by the user as a result of using this product.
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Contec PWA-65AWD9 Owner's manual
-
-
Contec POA200-20-2 Owner's manual
-
-
-
-
-
-
-
Contec BX-BKT-VESA02 Owner's manual