Day-Brite CFI ClearAppeal Recessed LED Install Instructions
- Type
- Install Instructions
This manual is also suitable for
Day-Brite CFI ClearAppeal Recessed LED
The Day-Brite CFI ClearAppeal Recessed LED is a high-performance, energy-efficient lighting solution for commercial and residential applications. With its sleek design and innovative features, this LED fixture provides exceptional illumination and versatility.
Key Features:
- Energy Efficiency: Utilizing advanced LED technology, this fixture consumes significantly less energy compared to traditional lighting systems, reducing operating costs.
- Long Lifespan: Its LEDs boast an extended lifespan of up to 50,000 hours, minimizing maintenance and replacement expenses.
Day-Brite CFI ClearAppeal Recessed LED
The Day-Brite CFI ClearAppeal Recessed LED is a high-performance, energy-efficient lighting solution for commercial and residential applications. With its sleek design and innovative features, this LED fixture provides exceptional illumination and versatility.
Key Features:
- Energy Efficiency: Utilizing advanced LED technology, this fixture consumes significantly less energy compared to traditional lighting systems, reducing operating costs.
- Long Lifespan: Its LEDs boast an extended lifespan of up to 50,000 hours, minimizing maintenance and replacement expenses.
CAUTION: This fixture is designed for permanent installation in ordinary (Non-Hazardous) locations in accordance with the National Electrical Code and
all applicable local codes. Do not use in areas of limited ventilation or in high ambient enclosures. The lamp and fixture operate at high temperatures.
Contact with combustible materials can cause fire and personal contact can cause severe burns.
CLEARAPPEAL
& SOFTRACE
Page 1 of 2
Instruction Sheet
3/19/2019
ATTENTION: Ce luminaire a t conu pour une installation permanente dans un emplacement rgulier (non dangereux) et en conformit avec le
Code lectrique canadien et codes locaux applicables. Ne jamais installer dans un endroit o la ventilation est limite ou dans des botiers o la
temprature ambiante est trs leve. La lampe et le luminaire fonctionnent des tempratures leves, un contact avec des matriaux combustibles
peut engendrer un incendie et un contact corporel peut causer de svres brlures.
(ENGLISH \ FRANAIS)
INSTALLATION INSTRUCTIONS
INSTRUCTIONS D'INSTALLATION
ATTENTION: L'INSTALLATION ET L'ENTRETIEN DE
CE PRODUIT DOIT TRE EFFECTU PAR UN
LECTRICIEN QUALIFI OU SERVICE PERSONNEL
CAUTION: THE INSTALLATION AND SERVICING OF
THIS PRODUCT SHOULD BE PERFORMED BY A
QUALIFIED ELECTRICIAN OR SERVICE PERSONNEL
Signify North America Corporation
200 Franklin Square Drive
Somerset, NJ 08873
Phone: 855-486-2216
Signify Canada Ltd. / Signify Canada Lte
281 Hillmount Road
Markham ON, Canada L6C 2S3
Phone: 800-668-9008
12NC: 442294891781
USING INTEGRAL GRID CLIPS
BEND TOP TAB OUTWARDS AT 90. BEND BOTTOM
TAB OUTWARD 20. REPEAT FOR ALL FOUR CORNERS
INTEGRAL GRID CLIP TABS
ONGLET INTGRAL POUR
CLIP DE PLAFOND
CEILING GRID
GRILLE DU PLAFOND
INSTALL LUMINAIRE BY PLACING IN CEILING GRID LOCATION. MAKE
SURE THE GRID CLIP TABS ARE SNAPPED IN PLACE. (SEE FIGURE-1)
INSTALLER LE LUMINAIRE EN LE POSITIONNANT DANS LE PLAFOND.
VOUS ASSURER QUE LES LANGUETTES D'AGRAFES DU PLAFOND
SONT BIEN EN PLACE. (VOIR FIGURE-1)
GROUNDING
DETAIL
-GROUNDING CONDUCTOR (IF INSULATED) TO
BE STRIPPED MIN. 1".
-INSERT END OF WIRE INTO SMALL HOLE.
-WRAP COUNTERCLOCKWISE AS
ILLUSTRATED.
-TIGHTEN SCREW.
LE CONDUCTEUR DE MISE LA TERRE (SI ISOL)
DOIT TRE DNUD SUR UN MINIMUM DE 1 PO
INSRER L'EXTRMIT DU FIL DANS LE PETIT
ORIFICE
ENROULER DANS LE SENS INVERSE DES AIGUILLES
D'UNE MONTRE TEL QU'ILLUSTR
RESSERRER LA VIS
DTAIL DE MISE
LA TERRE
MAKE SUPPLY CONNECTIONS THROUGH ACCESS PLATE
PROVIDED IN THE TOP OF THE LUMINAIRE. (SEE FIGURE-2)
EFFECTUER LES CONNEXIONS DANS LA PLAQUE D'ACCS SITUE
L'EXTRMIT DU LUMINAIRE (VOIR FIGURE-2)
GROUNDING
LOCATION
POINT DE MISE
LA TERRE
ACCESS
PLATE
PLAQUE
D'ACCS
FIGURE 1
FIGURE 2
CAUTION: This fixture is designed for permanent installation in ordinary (Non-Hazardous) locations in accordance with the National Electrical Code and
all applicable local codes. Do not use in areas of limited ventilation or in high ambient enclosures. The lamp and fixture operate at high temperatures.
Contact with combustible materials can cause fire and personal contact can cause severe burns.
CLEARAPPEAL
& SOFTRACE
Page 2 of 2
Instruction Sheet
3/19/2019
ATTENTION: Ce luminaire a t conu pour une installation permanente dans un emplacement rgulier (non dangereux) et en conformit avec le
Code lectrique canadien et codes locaux applicables. Ne jamais installer dans un endroit o la ventilation est limite ou dans des botiers o la
temprature ambiante est trs leve. La lampe et le luminaire fonctionnent des tempratures leves, un contact avec des matriaux combustibles
peut engendrer un incendie et un contact corporel peut causer de svres brlures.
(ENGLISH \ FRANAIS)
INSTALLATION INSTRUCTIONS
INSTRUCTIONS D'INSTALLATION
ATTENTION: L'INSTALLATION ET L'ENTRETIEN DE
CE PRODUIT DOIT TRE EFFECTU PAR UN
LECTRICIEN QUALIFI OU SERVICE PERSONNEL
CAUTION: THE INSTALLATION AND SERVICING OF
THIS PRODUCT SHOULD BE PERFORMED BY A
QUALIFIED ELECTRICIAN OR SERVICE PERSONNEL
Signify North America Corporation
200 Franklin Square Drive
Somerset, NJ 08873
Phone: 855-486-2216
Signify Canada Ltd. / Signify Canada Lte
281 Hillmount Road
Markham ON, Canada L6C 2S3
Phone: 800-668-9008
12NC: 442294891781
SCREW DRIVER SLOT
EMPLACEMENT DES TOURNEVIS
LENS REMOVAL
SHIFT LENS TO ONE SIDE UNTIL THE LENS IS
FREE FROM THE HOUSING. YOU MAY USE A
SCREWDRIVER TO ASSIST LENS REMOVAL
USING THE SCREWDRIVER SLOT. REVERSE
STEPS TO REINSTALL LENS (SEE FIGURE 3)
DCALER LA LENTILLE D'UN CT JUSQU' CE
QUE LA LENTILLE SOIT LIBRE DU LUMINAIRE.
VOUS POUVEZ UTILISER UN TOURNEVIS POUR
LIMINER LA LENTILLE L'AIDE DE
L'EMPLACEMENT DU TOURNEVIS. TAPES
INVERSEES POUR RINSTALLER LA
LENTILLE(VOIR FIGURE 3)
LENS REMOVAL DIRECTION
DIRECTION D'ENLEVEMENT DE LA LENTILLE
WIREWAY
COVER SCREWS
VIS DE COUVERTURE
DE CBLE
WIRE COMPARTMENT ACCESS
TO ACCESS WIRE COMPARTMENT REMOVE THE WIREWAY
COVER SCREWS AND REMOVE COVER. (SEE FIGURE 4)
POUR ACCDER AU COMPARTIMENT DE FIL, ENLEVER LES VIS
DU COUVERCLE DU FIL ET ENLEVER LE COUVERCLE. (VOIR
FIGURE 4)
FIGURE 3
FIGURE 4
-
1
-
2
Day-Brite CFI ClearAppeal Recessed LED Install Instructions
- Type
- Install Instructions
- This manual is also suitable for
Day-Brite CFI ClearAppeal Recessed LED
The Day-Brite CFI ClearAppeal Recessed LED is a high-performance, energy-efficient lighting solution for commercial and residential applications. With its sleek design and innovative features, this LED fixture provides exceptional illumination and versatility.
Key Features:
- Energy Efficiency: Utilizing advanced LED technology, this fixture consumes significantly less energy compared to traditional lighting systems, reducing operating costs.
- Long Lifespan: Its LEDs boast an extended lifespan of up to 50,000 hours, minimizing maintenance and replacement expenses.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Day-Brite CFI ClearAppeal Recessed LED
Related papers
-
Day-Brite CFI FluxPanel LED Install Instructions
-
-
-
-
-
-
-
-
Day-Brite CFI Day-Brite CFI FSSEZ440L835-UNV Fluxstream EZ LED User manual
-
Day-Brite CFI FluxStream LED Industrial Install Instructions
Other documents
-
Progress Lighting 93109050 B Installation guide
-
Ledalite SHINE Install Instructions
-
Signify SBP User manual
-
Signify FBZ User manual
-
Signify FSS220L840-UNV-DIM User manual
-
Alkco U2C 2x2 Grid Ceiling Install Instructions
-
-
Bauknecht CS2270BR User manual
-
Bauknecht CKU2482RWS User manual
-
Bauknecht CKU2482SW User manual