The MRC DCC Auto Reverse Module will automate the operation of
your DCC reverse section with simple 4-wire hookup.
Operation – When a DCC decoder equipped locomotive passes through
the insulated gaps leading into or out from a reverse loop section, the
MRC DCC Auto Reverse Module will automatically match the track’s
polarity and maintain the same travel direction for the locomotive.
Note: This unit was not primarily designed for use with standard
locomotives and will cause a non-decoder equipped locomotive to travel
in reverse after passing an insulated gap. When this happens, simply
change the direction of the locomotive by using the DCC command
station.
Service and Limited Warranty - Our Auto Reverse Module carries a six
(6) month warranty against factory defects. This warranty does not
include abuse, misuse, neglect, improper installation, unintended use, or
any modifications made to the product. If it should become necessary to
This MRC DCC Auto Reverse Module will automate the operation of
your DCC reverse loop section with simple 4-wire hookup.
Operation – When a DCC decoder equipped locomotive passes through
the insulated gaps leading into or out from a reverse loop section, the
MRC DCC Auto Reverse Module will automatically match the track’s
polarity and maintain the same travel direction for the locomotive.
Note: This unit was not primarily designed for use with standard
locomotives and will cause a non-decoder equipped locomotive to travel
in reverse after passing an insulated gap. When this happens, simply
change the direction of the locomotive by using the DCC command
station.
Service and Limited Warranty - Our Auto Reverse Module carries a six
(6) month warranty against factory defects. This warranty does not
include abuse, misuse, neglect, improper installation, unintended use, or
any modifications made to the product. If it should become necessary to
Wiring - Connect the two yellow wires
to the reverse loop section and the
two
red wires to the main line
section
Auto
Reverse
Module
Wiring - Connect the two yellow wires
to the reverse loop section and the
two
red wires to the main line
AD520
return the Auto Reverse Module for warranty repair/replacement, be sure
to contact MRC technical support beforehand to ensure you receive the
correct fees for service. This also gives us the opportunity to
troubleshoot issues which may be solved with technical phone support.
The six-month warranty does not include return shipping for customers
outside of the continental United States (including Hawaii, Alaska,
Canada, and Mexico). Customers outside of the continental United
States must contact us for return shipping rates.
Questions regarding the six-month warranty policy or troubleshooting
issues can be directed to MRC Customer Support by calling 1-732-225-
6360 from Monday to Friday between 8:00am and 5:00pm EST or by
emailing us at mrcsupport@modelrectifier.com.
In order to receive warranty service, we require a copy of the original
sales receipt to validate the warranty period. Include a note briefly
describing the issues along with your name, address, phone number,
and email address.
Our return mailing address is:
Model Rectifier Corporation
360 Main St. STE # 2
Matawan, NJ 07747 USA
©2019 Model Rectifier Corporation Printed in USA
return the Auto Reverse Module for warranty repair/replacement, be sure
to contact MRC technical support beforehand to ensure you receive the
correct fees for service. This also gives us the opportunity to
troubleshoot issues which may be solved with technical phone support.
The six-month warranty does not include return shipping for customers
outside of the continental United States (including Hawaii, Alaska,
Canada, and Mexico). Customers outside of the continental United
States must contact us for return shipping rates.
Questions regarding the six-month warranty policy or troubleshooting
issues can be directed to MRC Customer Support by calling 1-732-225-
6360 from Monday to Friday between 8:00am and 5:00pm EST or by
emailing us at mrcsupport@modelrectifier.com.
In order to receive warranty service, we require a copy of the original
sales receipt to validate the warranty period. Include a note briefly
describing the issues along with your name, address, phone number,
and email address.
Our return mailing address is:
Model Rectifier Corporation
360 Main St. STE # 2
Matawan, NJ 07747 USA
©2019 Model Rectifier Corporation Printed in USA