Currys Essentials C13DVDB10 Quick start guide
- Type
- Quick start guide
13.3” LCD TV
WITH DVD PLAYER
QUICK START GUIDE
C13DVDB10
Unpacking
11
Connecting the Aerial
44
Installing the Base Stand
22
Operating Your Remote Control
33
66
Connecting to the Mains Socket
55
Turning the TV on for the first time
Remove all packaging from the TV. Retain the packaging. If you dispose of it please
do so according to any local regulations.
1. Plug in the mains adapter into the DC 12V socket of the TV and the mains socket
after you have completed all the connections.
2. At this stage, the TV switches to standby mode. The red LED indicator will
illuminate on the front panel of the TV.
3. Press the button on the top panel of the TV or the button on the remote
control to turn the TV on. The red LED indicator will turn blue.
The first time you turn the TV on, it will go straight into First Time Installation.
Connect one end of the RF coaxial cable to the aerial socket on the wall and the
other end of the cable to the RF (75Ω) socket on the left rear side of your TV.
Install the batteries correctly by following the polarity (+ and -) indications
in the battery compartment.
Do not connect the TV to the mains supply until you have completed all
the connections.
1. Press and lift the back cover
up to open the battery
compartment of the remote
control.
2. Insert two AAA size batteries.
Close the battery
compartment cover.
Press the OK button on the remote control to start the First Time Installation.
Congratulations on the purchase of your new Currys Essentials TV.
Your new TV incorporates the latest technology to enhance your viewing experience.
We would suggest that you allow about 20 mins for initial setup.
Please follow this guide for a successful rst time installation.
1
2
1. Lay the TV down on a at surface with the back side facing up. Please make sure to
place a soft cushioned material (such as a pillow or thick piece of foam) beneath the
screen.
2. Slide in the base stand until the screw holes are aligned. Secure the base stand with
the 4 screws.
Well done, your new TV is now ready to use.
You will nd that there are many exciting features available. To get to know all
these features, please take some time to read the instruction manual provided
with your TV.
If after reading the instruction manual you have additional questions related to the
use of your TV please call our Customer Technical Services Centre.
Tel: 0844 800 6020 (UK only)
LCD TV
Screws x 4
Remote Control /
AAA Batteries x 2
AV Cable
Instruction Manual Quick Start Guide Digital Switchover
Addendum
Video
Video
R
R
L
L
Screws x 4
(P.N. I.03.MP4010001)
Screw
Mains AdapterTV Base Stand
(P.N.: I.08.951336804)
OR
RF coaxial cable
(not included)
To the mains
socket
LED Indicator
C13DVDB10_QSG_100827_Zell.pdf 1 30/08/2010 6:03 PM
-
1
Currys Essentials C13DVDB10 Quick start guide
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Currys Essentials C22DVDB10 Quick start guide
-
-
-
-
-
-
-