WWW.CALIBER.NL
CALIBER HEAD OFFICE • The Netherlands • Fax: +31 (0)416 69 90 01 • E-mail: info@caliber.nl
The HTT 101C cardridge
package contains:
2 x saphire stylus for HTT 101 turntable
Replacing the stylus (needle)
• Lift the tone arm off the tone arm rest.
• At the front end of the tone arm, place
the tip of your ngernail between the
red stylus holder and the black cartridge
housing as shown, press down on the red
stylus holder until it separates form the
cartridge housing.
• Completely remove the red stylus holder
with worn stylus and discard it.
• Place the new red stylus holder with
stylus under the cartridge housing. First,
press upward on the back side of the
stylus holder, and then press up on
the front edge of the stylus holder
until it snaps into place on the cartridge
housing.
1
2
3
4
5
New stylus
2 x saphire stylus for HTT 101 turntable
2x stylet en saphir pour platine disque HTT 101
2x Saphir Stift für HTT 101 Plattenspieler
2x stilo in zafro per giradischi HTT 101
2x aguja de zaro para la placa giratoria HTT 101
Caneta sara 2x para placa giratória HTT 101
2x sarpenna för HTT 101-skivspelare
2x sapphire rysik do gramofonu HTT 101
2x γραφίδα ζαφείρι για πικάπ HTT 101
2x zafírový stylus pre gramofón HTT 101
2x Sapphire stylus voor HTT 101 draaitafel
-
1
