Shimano FC-S125 is a double gear front chainwheel designed for smooth and efficient gear changes. It features W-cut chainwheel teeth on the larger gear for improved downshifting and a short pin on the large chainwheel to prevent chain slippage. The crank arm is recessed to avoid ankle strikes, and the gold arrow pattern adds a stylish touch. Suitable for 1/2" x 3/32" chains, with 42T and 52T gear teeth, this chainwheel is compatible with Dura-Ace AX, EX, 600AX, and 600EX-LD Type gear plates.
Shimano FC-S125 is a double gear front chainwheel designed for smooth and efficient gear changes. It features W-cut chainwheel teeth on the larger gear for improved downshifting and a short pin on the large chainwheel to prevent chain slippage. The crank arm is recessed to avoid ankle strikes, and the gold arrow pattern adds a stylish touch. Suitable for 1/2" x 3/32" chains, with 42T and 52T gear teeth, this chainwheel is compatible with Dura-Ace AX, EX, 600AX, and 600EX-LD Type gear plates.
-
1
Shimano FC-S125 Service Instructions
- Type
- Service Instructions
- This manual is also suitable for
Shimano FC-S125 is a double gear front chainwheel designed for smooth and efficient gear changes. It features W-cut chainwheel teeth on the larger gear for improved downshifting and a short pin on the large chainwheel to prevent chain slippage. The crank arm is recessed to avoid ankle strikes, and the gold arrow pattern adds a stylish touch. Suitable for 1/2" x 3/32" chains, with 42T and 52T gear teeth, this chainwheel is compatible with Dura-Ace AX, EX, 600AX, and 600EX-LD Type gear plates.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Shimano BL-7402 Service Instructions
-
-
-
-
-
Shimano FD-M950 Service Instructions
-
-
-
-
