Pulsar RS1566GD Operating instructions

Category
Rack accessories
Type
Operating instructions

Pulsar RS1566GD is a ready-to-assemble 15U/600x600 floor standing rack cabinet. It is intended for integrating CCTV, AC, I&HAS, RTV, LAN, or other systems in medium and big companies. The cabinet is made of cold-rolled steel and has a static load capacity of 800 kg. It comes with 4 casters without locks and 4 leveling feet. The front and rear doors are lockable.

The RS1566GD has adjustable distance between front and rear RACK rails, ventilation holes in the front door, top and bottom panel, and cable ducts in the top and bottom panel.

Pulsar RS1566GD is a ready-to-assemble 15U/600x600 floor standing rack cabinet. It is intended for integrating CCTV, AC, I&HAS, RTV, LAN, or other systems in medium and big companies. The cabinet is made of cold-rolled steel and has a static load capacity of 800 kg. It comes with 4 casters without locks and 4 leveling feet. The front and rear doors are lockable.

The RS1566GD has adjustable distance between front and rear RACK rails, ventilation holes in the front door, top and bottom panel, and cable ducts in the top and bottom panel.

INSTALLATION GUIDE
ENGLISH
code: RS1566GD
Name: RACK cabinet, floor standing, ready-to-assemble 15U/600x600
IM RS1566GD
Edition: 2 from 18.10.2013
Supersedes: 1 from 20.11.2012
EN*
1. Intended use:
The RACK 19” cabinet enables integrating CCTV, AC, I&HAS, RTV, LAN, or other systems in medium and big companies. It is
intended for devices manufactured in enclosures of the 19'' standard. Due to the RACK cabinets, the devices are aesthetically mounted
and protected against mechanical damage.
2. Specifications:
SPECIFICATIONS
Mounting dimensions:
W=19", H=15U
External dimensions:
W=600, H=855, D=600 [mm, +/-2]
Net/gross weight:
56 / 62,6 [kg]
Materials:
- RACK mounting rails: cold-rolled steel SPCC 2mm RAL 9004 - bolted
- horizontal mounting rails: cold-rolled steel SPCC 1,5mm RAL 9004 - bolted
- frame: cold-rolled steel SPCC 1,2mm RAL 9004 - welded
- front door: 5mm toughened glass / SPCC 1,2mm RAL 9004 - hinged
- side panel: cold-rolled steel SPCC 1,2mm RAL 9004 - removable
- rear door: cold-rolled steel SPCC 1,2mm RAL 9004 - hinged
Static load:
800 kg (with leveling feet)
Use:
inside, IP20
Notes:
- adjustable distance between front and rear RACK rails
- ventilation holes in the front door, top and bottom panel
- possible mounting of a 2-fan tray in the top panel - RAWP600
- cable ducts in the top and bottom panel
- 4 casters without locks and 4 leveling feet included
- possible assembly of a 100mm high plinth - RAC166
- lockable front door (2 keys in set)
- lockable rear door (2 keys in set)
- side panel - lock assembly possible - RAZB16
- the possibility of installing a set of RAPU-S grounding wires in the rack
- ready-to-assemble
Certificates, declarations:
RoHS
3. Structure of the RACK cabinet.
top panel
rear door
frame
RACK rail
horizontal rail
side panel
front door
bottom panel
2” caster without lock
leveling foot
4. Assembling instructions:
The free standing, ready-to-assemble RACK cabinet is delivered in 5 separate packages.
4.1) Lay two frames of the RACK cabinet (package 2/5 and 3/5)
Fig.1
4.2) Attach the bottom panel to the cabinet’s frames from the left, and the top panel from the right (package 1/5).
Bolt with screws with nuts (16pcs - package 1/5). Bolt the casters and the leveling feet into the bottom panel of the cabinet
(package 1/5).
Fig.2
4.3) Stand the RACK cabinet.
Fig.3
4.4) From the inside of the cabinet’s frames (at front and back), mount two cage nuts on ¼ and ¾ of cabinet’s height, accordingly to
the figure below.
Fig.4
4.5) In horizontal rails (package 1/5), mount two cage nuts at front and back, as shown in Fig.4.
back front
Fig.5
4.6) Mount the horizontal rails from the inside, as shown in Fig.6.
Fig.6.
4.7) Mount the RACK rails from the inside, as in Fig.7.
Fig.7
4.8) Mount the side panels, front and rear doors - Fig.8
Fig.8
MANUFACTURER
Pulsar K.Bogusz Sp.j.
Siedlec 150,
32-744 Łapczyca
Tel. 14-610-19-40, Fax. 14-610-19-50
e-mail: biuro@pulsar.pl
www.pulsar.pl , www.zasilacze.pl
WARRANTY
12 months from the date of purchase.
THE WARRANTY IS VALID only upon presentation of the item’s proof of purchase.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Pulsar RS1566GD Operating instructions

Category
Rack accessories
Type
Operating instructions

Pulsar RS1566GD is a ready-to-assemble 15U/600x600 floor standing rack cabinet. It is intended for integrating CCTV, AC, I&HAS, RTV, LAN, or other systems in medium and big companies. The cabinet is made of cold-rolled steel and has a static load capacity of 800 kg. It comes with 4 casters without locks and 4 leveling feet. The front and rear doors are lockable.

The RS1566GD has adjustable distance between front and rear RACK rails, ventilation holes in the front door, top and bottom panel, and cable ducts in the top and bottom panel.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI