Vulcan Hart 1GR35M Datasheet

Vulcan Hart
Brand
Vulcan Hart
Model
1GR35M
Category
Deep fryers
Type
Datasheet

Vulcan Hart 1GR35M is a free-standing gas fryer with a 35-40 lbs. capacity stainless steel fry tank. It features a large cold zone area, a 1¼" full port ball-type drain valve, and a stainless steel cabinet. The fryer has a set of four 6" adjustable casters for easy mobility. It comes with twin fry baskets with plastic-coated handles and a 90,000 BTU/hr. input. The behind-the-door snap-action millivolt thermostat control adjusts from 200° to 400°F with a standing pilot. It has both Fahrenheit and Celsius scales and requires no electric hook-up.

Vulcan Hart 1GR35M is a free-standing gas fryer with a 35-40 lbs. capacity stainless steel fry tank. It features a large cold zone area, a 1¼" full port ball-type drain valve, and a stainless steel cabinet. The fryer has a set of four 6" adjustable casters for easy mobility. It comes with twin fry baskets with plastic-coated handles and a 90,000 BTU/hr. input. The behind-the-door snap-action millivolt thermostat control adjusts from 200° to 400°F with a standing pilot. It has both Fahrenheit and Celsius scales and requires no electric hook-up.

Item # C.S.I. Section 11420
FRYERS
P.O. Box 696
■
Louisville, KY 40201
■
Toll-free: 1-800-814-2028
■
Local: 502-778-2791
■
Quote & Order Fax: 1-800-444-0602
a division of ITW Food Equipment Group LLC
F32629 (07/10)
Model 1GR35M
SPECIFICATIONS
35 - 40 lbs. capacity free standing model gas fryer, Vulcan-
Hart Model No. 1GR35M. Stainless steel cabinet. Set of four 6"
adjustable casters. Stainless steel fry tank with three heat
exchanger tubes and a “V” shaped cold zone. 1¼" full port ball
type drain valve. Twin fry baskets with plastic coated handles.
90,000 BTU/hr. input. Behind the door millivolt snap action
thermostat control adjusts from 200° to 400°F. Both Fahrenheit
and Celsius scales.
Overall Dimensions:
15
1
⁄
2
"w x 30
1
⁄
4
"d x 47
1
⁄
8
"h working height 36
1
⁄
4
".
CSA design certied. NSF listed.
SPECIFY TYPE OF GAS WHEN ORDERING
Natural Gas
Propane Gas
SPECIFY ALTITUDE
Natural Gas for above 2000 ft.
Propane Gas for above 3500 ft.
STANDARD FEATURES
Stainless steel fry tank, 35 - 40 lbs. capacity. ■
Large cold zone area. ■
1¼" full port ball type drain valve. ■
Stainless steel cabinet. ■
Set of four 6" adjustable casters. ■
Twin fry baskets with plastic coated handles. ■
90,000 BTU/hr. input. ■
Behind the door snap action millivolt thermostat control ■
adjusts from 200° to 400°F with standing pilot.
Both Fahrenheit and Celsius scales. ■
Millivolt System - Requires no electric hook-up. ■
Hi-limit shut-off protector shuts off gas combination valve and ■
standing pilot.
Built in ue deector. ■
Tank brush, stainless steel crumb scoop and clean-out rod. ■
Nickel plated tube rack. ■
Earth magnet to secure closed door. ■
Easily removable stainless steel basket hanger for cleaning. ■
One year limited parts and labor warranty. ■
Ten year limited fry tank warranty. ■
ACCESSORIES (Packaged & Sold Separately)
6" adjustable casters (2 locking, 2 non-locking).
Stainless steel tank cover.
Connecting kit(s) for connecting two fryers together (banking
strip, brackets, and hardware included).
Single large basket – 13"w x 13
1
⁄
4
"d x 5
1
⁄
2
"h.
Extra Set of twin baskets – 6
1
⁄
2
"w x 13
1
⁄
4
"d x 6"h.
FRYMATE
™
– VX15 add-on Frymate Dump Station.
10" high stainless steel removable splash guard.
Flexible gas hose with quick disconnect.
OPTIONS
Second year extended limited parts and labor warranty.
1GR35M
FREE STANDING GAS FRYER
P.O. Box 696
■
Louisville, KY 40201
■
Toll-free: 1-800-814-2028
■
Local: 502-778-2791
■
Quote & Order Fax: 1-800-444-0602
a division of ITW Food Equipment Group LLC
FRYERS
F32629 (07/10)
Gas Inlet
1
⁄
2
" NPT
11.5 0
1.94
7.5 8
5.81
1GR35M
FREE STANDING GAS FRYER
INSTALLATION INSTRUCTIONS
This appliance is manufactured for commercial installation only 5.
and is not intended for home use.
SERVICE CONNECTIONS:
1
⁄
2
" (13 mm) ID and
3
⁄
4
" (19 mm) OD rear gas connection.
NOTE: In line with its policy to continually improve its product,
Vulcan reserves the right to change materials and specications
without notice.
A combination valve with pressure regulator is provided with 1.
this unit. Natural Gas 4.0" (102 mm) W.C. Propane Gas 10.0"
(254 mm) W.C.
An adequate ventilation system is required for Commercial 2.
Cooking Equipment. Information may be obtained by writing to
the National Fire Protection Association, Batterymarch Park,
Quincy, MA 02269. When writing refer to NFPA No. 96.
All models require a 6" (152 mm) clearance at both sides and rear 3.
adjacent to combustible construction.
All models require a 6" (407 mm) minimum clearance to adjacent 4.
open top burner units.
Model Width Depth
Overall
Height
Working
Height Tank Size BTU/HR
Fry Comp.
Capacity
Approx.
Shipping Weight
1GR35M 15
1
⁄
2
" 30
1
⁄
4
" 47
1
⁄
8
" 36
1
⁄
4
" 14" x 14" 90,000 35 - 40 lbs. 250 lbs. (91 kg)
This appliance is manufactured for commercial use only and is not intended for home use.
44.50
Door Open
10.00
Tank Back
36.29
11.28
6.25
+1.00
-.00
4.81
14.97
47.14
4.89
30.19
15.50
  • Page 1 1
  • Page 2 2

Vulcan Hart 1GR35M Datasheet

Vulcan Hart
Brand
Vulcan Hart
Model
1GR35M
Category
Deep fryers
Type
Datasheet

Vulcan Hart 1GR35M is a free-standing gas fryer with a 35-40 lbs. capacity stainless steel fry tank. It features a large cold zone area, a 1¼" full port ball-type drain valve, and a stainless steel cabinet. The fryer has a set of four 6" adjustable casters for easy mobility. It comes with twin fry baskets with plastic-coated handles and a 90,000 BTU/hr. input. The behind-the-door snap-action millivolt thermostat control adjusts from 200° to 400°F with a standing pilot. It has both Fahrenheit and Celsius scales and requires no electric hook-up.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents