VEHICLE
CHARGING
AND
OPERATIONS
QUICK
REFERENCE
GUIDE
iQ EV
2013
GET INFORMED.
ROLL.
© 2013 Scion, a marque of Toyota Motor Sales, U.S.A., Inc.
Printed in U.S.A. 1/13
12- TCS-05917
EMAIL
www.scion.com
Contact
-
CHAT
www.scion.com
Have a Question?
Contact
-
PHONE
1.866.70.SCION
-
MAIL
SCION
19001 S. Western Ave.
D102, P. O. Box 2742
Torrance, CA 90509-2742
USA
-
WEB
www.scion.com
-
00505-QRG13-IQEV
12-TCS-05917_QRG_Scion_iQEV_3_0F_lm.indd 1 1/14/13 7:17 PM
This Quick Reference Guide is a summary of basic vehicle operations.
It contains brief descriptions of fundamental operations so you can
locate and use the vehicle’s main equipment quickly and easily.
The Quick Reference Guide is not intended as a substitute for the
Owner’s Manual located in the vehicle’s glove box. We strongly
encourage you to review the Owner’s Manual and supplementary
manuals so you will have a better understanding of the vehicle’s
capabilities and limitations.
Your dealership and the entire staff of Toyota Motor Sales, U.S.A.,
Inc. wish you many years of satisfied driving in your new Scion iQ EV.
A word about safe vehicle operation
This Quick Reference Guide is not a full description of Scion iQ EV
operations. Every Scion iQ EV owner should review the Owner’s
Manual that accompanies this vehicle.
Pay special attention to the boxed information highlighted in
color throughout the Owner’s Manual. Each box contains safe
operating instructions to help you avoid injury or equipment
malfunction.
All information in this Quick Reference Guide is current at the
time of printing. Toyota reserves the right to make changes at
any time without notice.
2013
Scion iQ EV
INDEX
1
Visit your Toyota or Scion dealer for information on customizing this feature.
2
Programmable by customer. Refer to the Owner’s Manual for instructions and more
information.
OVERVIEW
Charge port 6
Hood release 8
Indicator symbols 4-5
Instrument cluster 4
Instrument panel
2-3
Keyless entry
1,2
6
Motor maintenance 8
Smart Key system
1,2
7
Charging 11-17
Charging equipment 10
Electric Vehicle System 9
Inspecting electrical leakage
detection function
Multi-Information
Display-Charging information
Range Map screen 9
Remote Climate Control 18
ELECTRIC VEHICLE SYSTEM
2013Scion-iQ-EV.indd 2 1/14/13 6:39 PM
OVERVIEW ELECTRIC VEHICLE SYSTEM
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
1
2013
Scion iQ EV
INDEX
1
Visit your Toyota or Scion dealer for information on customizing this feature.
2
Programmable by customer. Refer to the Owner’s Manual for instructions and more
information.
OVERVIEW
FEATURES/OPERATIONS
Air Conditioning/Heating 26
Audio 27
AUX port/USB port 28
Bottle holders 29
Cup holders 29
Hill-start Assist Control (HAC) 29
HWD (Heated Windshield Defroster) 26
Light control-Instrument panel 25
Lights & turn signals 23
Multi-Information Display 24
Parking brake 21
Power outlet 28
Seat adjustments-Front 22
Seat-Folding down rear seat 22
Seat heaters 25
Steering wheel switches 27
Tilt steering wheel 25
Transmission 21
Windows 24
Windshield wipers & washers 23
Door locks 30
Emergency tire puncture repair kit 31
Floor mat installation 33
Seat belts 30
Star Safety System
TM
32-33
Tire Pressure Monitoring
(warning) System
Charge port 6
Hood release 8
Indicator symbols 4-5
Instrument cluster 4
Instrument panel
2-3
Keyless entry
1,2
6
Motor maintenance 8
Smart Key system
1,2
7
Charging 11-17
Charging equipment 10
Electric Vehicle System 9
Inspecting electrical leakage
detection function
Multi-Information
Display-Charging information
Range Map screen 9
Remote Climate Control 18
19
20
31
ELECTRIC VEHICLE SYSTEM
SAFETY AND EMERGENCY FEATURES
2013Scion-iQ-EV.indd 1 1/14/13 6:40 PM
2
OVERVIEW
Instrument panel
Power outside rearview mirror controls
Headlight and turn signal controls
Steering wheel audio controls*
Wiper and washer controls
Front passenger occupant classification indicator/
Front passenger seat belt reminder light
Emergency flasher button
Navigation system*
Air Conditioning controls
HWD (Heated Windshield Defroster) switch
Rear window defogger button
Charging timer switch
Recharge inlet door opener switch
AUX port/USB port*
Door lock switch
Seat heater switches
Power outlet
Power switch
Tilt steering lock release
Tire Pressure Monitoring (warning) System reset button
Hood release
* For details, refer to the “Navigation System Owner’s Manual.”
2013Scion-iQ-EV.indd 2 1/14/13 6:42 PM
OVERVIEW ELECTRIC VEHICLE SYSTEM
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
3
Power outside rearview mirror controls
Headlight and turn signal controls
Steering wheel audio controls*
Wiper and washer controls
Front passenger occupant classification indicator/
Front passenger seat belt reminder light
Emergency flasher button
Navigation system*
Air Conditioning controls
HWD (Heated Windshield Defroster) switch
Rear window defogger button
Charging timer switch
Recharge inlet door opener switch
AUX port/USB port*
Door lock switch
Seat heater switches
Power outlet
Power switch
Tilt steering lock release
Tire Pressure Monitoring (warning) System reset button
Hood release
* For details, refer to the “Navigation System Owner’s Manual.”
2013Scion-iQ-EV.indd 3 1/14/13 6:42 PM
4
OVERVIEW
Driver seat belt reminder
(alarm will sound if speed is over 12 mph)
Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Brake system warning*
Brake system warning*
12-volt battery charging system warning*
Traction battery warning*
Indicator symbols
Instrument cluster
Service indicator and reminder
Speedometer
Multi-Information Display
SOC (State of Charge) gauge
EV system indicator
Outside temperature display
Clock
Shift position indicator
Odometer and two trip meters
“DISP” knob
Odometer/trip meter display and instrument panel light change knob
*
If indicator does not turn off within a few seconds of starting EV system, there may be a
malfunction. Have vehicle inspected by your Toyota or Scion dealer.
For details, refer to “Warning lights and indicators” Section 3-3, 2013 Owner’s
Manual.
2013Scion-iQ-EV.indd 4 1/14/13 6:48 PM
OVERVIEW ELECTRIC VEHICLE SYSTEM
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
5
OVERVIEW
Anti-lock Brake System warning*
Open door warning
Low Tire Pressure Warning*
Turn signal indicator
Headlight low/high beam indicator
Electric power steering system warning*
Slip indicator*
Airbag SRS warning*
Service indicator and reminder
Speedometer
Multi-Information Display
SOC (State of Charge) gauge
EV system indicator
Outside temperature display
Clock
Shift position indicator
Odometer and two trip meters
“DISP” knob
Odometer/trip meter display and instrument panel light change knob
*
If indicator does not turn off within a few seconds of starting EV system, there may be a
malfunction. Have vehicle inspected by your Toyota or Scion dealer.
Front passenger occupant classification indicator
For details, refer to “Warning lights and indicators” Section 3-3, 2013 Owner’s
Manual.
ECO Driving Indicator Light*
READY indicator
Immobilizer system indicator
Plug-in indicator (yellow/green)
Output control warning*
Master warning*
SOC (State Of Charge) warning
2013Scion-iQ-EV.indd 5 1/14/13 6:48 PM
6
OVERVIEW
Keyless entry
Locking operation Unlocking operation
NOTE: If a door is not opened within
60 seconds of unlocking, all doors will
relock for safety.
Push
Push ONCE: Driver door
TWICE: ALL doors
Panic button
Push and hold
Charging inlet
Unlock
Unlock
Open
Open
Smart Key system
Start function
NOTE: Shift position must be in Park and brake pedal depressed.
Without depressing the brake pedal, pressing the “POWER” switch will change the
operation mode in succession from:
* Driver door unlocking function can be programmed to unlock driver door only, or
all doors. Grasping passenger door handle or pushing the unlock button on the back
door opener will unlock all doors.
NOTE: Doors may also be locked/unlocked using remote.
Power (without starting EV System)
ACCESSORY
ON
OFF
Back door lock/unlock
Locking operation
Carry remote to lock
Carry remote
to lock/unlock
Push
Remote climate control
While charging with an external power source, the heater/air conditioning can be
operated before getting in the vehicle.
Push and hold
Normal charging inlet Quick charging inlet
(if equipped)
2013Scion-iQ-EV.indd 6 1/14/13 6:48 PM
OVERVIEW ELECTRIC VEHICLE SYSTEM
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
7
Unlocking operation
NOTE: If a door is not opened within
60 seconds of unlocking, all doors will
relock for safety.
Unlock
Open
Smart Key system
Start function
NOTE: Shift position must be in Park and brake pedal depressed.
Push
Depress brake
pedal
Carrying
Without depressing the brake pedal, pressing the “POWER” switch will change the
operation mode in succession from:
* Driver door unlocking function can be programmed to unlock driver door only, or
all doors. Grasping passenger door handle or pushing the unlock button on the back
door opener will unlock all doors.
NOTE: Doors may also be locked/unlocked using remote.
Power (without starting EV System)
Accessories such as the radio will operate.
Power ON; the EV System is not engaged.
All systems OFF.
ACCESSORY
ON
OFF
Back door lock/unlock
Locking operation
Unlocking operation*
Carry remote to lock Carry remote to unlock
Grasp
Lock
Unlock
Carry remote
to lock/unlock
Green indicator ON
Touch
While charging with an external power source, the heater/air conditioning can be
operated before getting in the vehicle.
Quick charging inlet
(if equipped)
2013Scion-iQ-EV.indd 7 1/14/13 6:48 PM
8
Hood release
Pull
Pull up latch and
raise hood
Windshield washer fluid tank
Inverter coolant reservoir
NOTE: Regularly scheduled maintenance will help extend the life of your
vehicle and maintain performance. Please refer to the “Warranty &
Maintenance Guide.”
Motor maintenance
Engage support rod
OVERVIEW
ELECTRIC VEHICLE SYSTEM
Starting the EV System
The Scion iQ EV uses electricity in a rechargeable traction battery to power the
electric motor. The driving range is extended by using regenerative braking to
store electricity in the traction battery. This technology is clean and has a low
impact on the environment by not emitting exhaust such as CO
2
or NO
X
during
operation.
Tips for reducing battery consumption
-Keep the EV System indicator needle within the ECO or Charge area.
-Drive in D position.
-When possible, avoid driving on steep inclines.
-Avoid driving at speeds that are higher than necessary, especially on the highway.
-When possible, avoid sudden stops to maximize regenerative braking energy.
-Minimize use of Air Conditioning and heating; the seat heater may also be used to
supplement heating.
-Maintain recommended tire pressure and avoid carrying unnecessary luggage.
-Utilize the Remote Climate Control to warm or cool cabin before driving.
Electric Vehicle System
Range Map screen
The estimated driving range based on the amount of remaining battery charge can
be displayed as a reference.
Refer to the Navigation System Owner’s Manual for more details.
2013Scion-iQ-EV.indd 8 1/14/13 6:48 PM
OVERVIEW ELECTRIC VEHICLE SYSTEM
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
9
Windshield washer fluid tank
Inverter coolant reservoir
NOTE: Regularly scheduled maintenance will help extend the life of your
vehicle and maintain performance. Please refer to the “Warranty &
Maintenance Guide.”
ELECTRIC VEHICLE SYSTEM
Starting the EV System
The Scion iQ EV uses electricity in a rechargeable traction battery to power the
electric motor. The driving range is extended by using regenerative braking to
store electricity in the traction battery. This technology is clean and has a low
impact on the environment by not emitting exhaust such as CO
2
or NO
X
during
operation.
Tips for reducing battery consumption
-Keep the EV System indicator needle within the ECO or Charge area.
-Drive in D position.
-When possible, avoid driving on steep inclines.
-Avoid driving at speeds that are higher than necessary, especially on the highway.
-When possible, avoid sudden stops to maximize regenerative braking energy.
-Minimize use of Air Conditioning and heating; the seat heater may also be used to
supplement heating.
-Maintain recommended tire pressure and avoid carrying unnecessary luggage.
-Utilize the Remote Climate Control to warm or cool cabin before driving.
Electric Vehicle System
(1) Depress the brake pedal, and
press the “POWER” switch
while in Park.
(2) After a few seconds the
“READY” light comes on.
Range Map screen
The estimated driving range based on the amount of remaining battery charge can
be displayed as a reference.
Refer to the Navigation System Owner’s Manual for more details.
2013Scion-iQ-EV.indd 9 1/14/13 6:48 PM
10
Charging equipment
Charging connector
Latch release button
CCID (Charging Circuit Interrupting Device)
Plug
Power indicator
Error warning indicator
Test button
Reset button
The charging cable included with the vehicle is designed to be connected only
to an AC 120V power source.
Charging indicator
Charging inlet light
Normal charging inlet
Charging inlet cap
Quick charging inlet (if equipped)
Normal charging cable
Recharge inlet door (charging port lid)
ELECTRIC VEHICLE SYSTEM
Charging
Step 1 Plug the charging cable into the outlet of the external power source.
NOTE: Hanging the CCID on a hook is recommended to reduce the strain on the
outlet and charging cable plug.
Step 2 Press the test button on the CCID to check that the electrical leakage
detection function operates properly.
“While-in-use”
cover
The Scion iQ EV may be charged immediately, or scheduled to charge at a specific
time. Before charging, it is recommended that:
-Parking brake is securely set with shift position in “P”
-All lights are turned off
-The POWER switch is OFF
Start charging
2013Scion-iQ-EV.indd 10 1/14/13 6:48 PM
OVERVIEW ELECTRIC VEHICLE SYSTEM
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
11
Charging connector
Latch release button
CCID (Charging Circuit Interrupting Device)
Plug
Power indicator
Error warning indicator
Test button
Reset button
The charging cable included with the vehicle is designed to be connected only
to an AC 120V power source.
Charging indicator
Charging inlet light
Normal charging inlet
Charging inlet cap
Quick charging inlet (if equipped)
Normal charging cable
Recharge inlet door (charging port lid)
Charging
Step 1 Plug the charging cable into the outlet of the external power source.
NOTE: Hanging the CCID on a hook is recommended to reduce the strain on the
outlet and charging cable plug.
- Make sure to hold the body of the
plug and insert it firmly into the
outlet.
- Check that the power indicator
of the CCID (Charging Circuit
Interrupting Device) is illuminated.
- The surface of the CCID may
become hot, but this does not
indicate a malfunction.
Step 2 Press the test button on the CCID to check that the electrical leakage
detection function operates properly.
- If the error warning indicator
illuminates when test button is
pressed, the function is operating
correctly.
- After the test is completed, press
reset button to turn off the error
warning. Charging cannot occur
while error warning is illuminated.
- If the error warning indicator does
not come on when test button is
pressed, the function may not be
operating correctly. Stop charging
immediately and contact your
Toyota or Scion dealer.
“While-in-use”
cover
The Scion iQ EV may be charged immediately, or scheduled to charge at a specific
time. Before charging, it is recommended that:
-Parking brake is securely set with shift position in “P”
-All lights are turned off
-The POWER switch is OFF
Start charging
2013Scion-iQ-EV.indd 11 1/14/13 6:48 PM
12
Step 3 Press the recharge inlet door opener switch to open the recharge inlet
door.
Step 4 Open the charging inlet cap by releasing the clip.
Step 5 Remove the charging connector cap. Affix the cap to the cable.
Push to
open
ELECTRIC VEHICLE SYSTEM
The recharge inlet door will not open
when the “READY” indicator is on or
the power switch is in ON mode.
Step 6 Insert the charging connector into the charging inlet.
Guide
Step 7 Confirm that the charging indicator is illuminated. (When the charging
timer function is in use, the light will turn off several seconds after
illuminating.)
2013Scion-iQ-EV.indd 12 1/14/13 6:48 PM
OVERVIEW ELECTRIC VEHICLE SYSTEM
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
13
Step 3 Press the recharge inlet door opener switch to open the recharge inlet
door.
Step 4 Open the charging inlet cap by releasing the clip.
Step 5 Remove the charging connector cap. Affix the cap to the cable.
The recharge inlet door will not open
when the “READY” indicator is on or
the power switch is in ON mode.
Step 6 Insert the charging connector into the charging inlet.
Guide
- Do not press the latch release
button when inserting the
connector.
- Align the guides and push
connector in straight and firmly
until it clicks.
Step 7 Confirm that the charging indicator is illuminated. (When the charging
timer function is in use, the light will turn off several seconds after
illuminating.)
- Charging will not start if the
charging indicator does not
illuminate when the charging
connector is inserted.
- The amount of time until charging
is completed can be checked on
the Multi-Information Display by
turning the power switch to ON
mode.
- The charging indicator will turn off
when charging is completed.
2013Scion-iQ-EV.indd 13 1/14/13 6:49 PM
14
ELECTRIC VEHICLE SYSTEM
Use of the charging timer can suppress deterioration of the hybrid battery
(traction battery) and off-peak electricity can be used effectively.
Setting the charging timer
Step 1 Stop the vehicle and press the charging timer switch.
Step 2 Press and hold the charging timer switch.
Step 3 Press the charging timer switch to select the setting mode.
Charging timer
The Multi-Information Display will
switch to the charging timer display.
The timing display will change from
solid to flashing.
Start time setting mode
Finish time setting mode
The mode will switch with each
press of the charging timer switch.
Step 5 Press and hold the charging timer switch.
Step 4 Adjust the set time using the time adjustment button.
Step 6 Turn the POWER switch off.
The charging timer indicator will start flashing.
Step 7 Connect the charging cable to the vehicle.
Check that the charging indicator has come on. It will turn off after several
seconds. If the indicator does not come on, re-insert the charging connector. If it
still does not come on, check the power source status using the power indicator on
the CCID (Charging Circuit Interrupting Device).
2013Scion-iQ-EV.indd 14 1/14/13 6:49 PM
OVERVIEW ELECTRIC VEHICLE SYSTEM
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
15
Use of the charging timer can suppress deterioration of the hybrid battery
(traction battery) and off-peak electricity can be used effectively.
Setting the charging timer
Step 1 Stop the vehicle and press the charging timer switch.
Step 2 Press and hold the charging timer switch.
Step 3 Press the charging timer switch to select the setting mode.
Step 5 Press and hold the charging timer switch.
Step 4 Adjust the set time using the time adjustment button.
Push knob to adjust hours/minutes
Turn knob to switch between
hours/minutes
Once set, the time display will
change from flashing to solid.
Step 6 Turn the POWER switch off.
The charging timer indicator will start flashing.
Step 7 Connect the charging cable to the vehicle.
Check that the charging indicator has come on. It will turn off after several
seconds. If the indicator does not come on, re-insert the charging connector. If it
still does not come on, check the power source status using the power indicator on
the CCID (Charging Circuit Interrupting Device).
2013Scion-iQ-EV.indd 15 1/14/13 6:49 PM
16
ELECTRIC VEHICLE SYSTEM
Start time vs. Finish time setting
Either start or finish time can be scheduled (they cannot be scheduled
simultaneously).
Start time setting
mode
Finish time setting
mode
Timer charging finishes when the traction battery is fully charged.
Charging starts at an unspecified time so that the battery will be fully charged
at approximately the scheduled finish time.
Cancelling the charging timer
If the charging timer switch is pressed while the charging timer indicator is
illuminated or flashing, the charging timer function will be canceled. However,
if the charging cable has already been connected to the vehicle, charging will
commence immediately.
The charging timer indicator will
turn off if the schedule is canceled.
Step 1 Pull the charging connector toward you while pressing the latch release
button.
Step 2 Attach the charging connector cap.
Step 3 Close the charging inlet cap, and then close the recharge inlet door.
Step 4 Remove the plug from the outlet when the charging equipment will not be
used for a long period of time.
After charging
2013Scion-iQ-EV.indd 16 1/14/13 6:49 PM
17
OVERVIEW ELECTRIC VEHICLE SYSTEM
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
Start time vs. Finish time setting
Either start or finish time can be scheduled (they cannot be scheduled
simultaneously).
Start time setting
mode
Finish time setting
mode
Timer charging finishes when the traction battery is fully charged.
Charging starts at an unspecified time so that the battery will be fully charged
at approximately the scheduled finish time.
Cancelling the charging timer
If the charging timer switch is pressed while the charging timer indicator is
illuminated or flashing, the charging timer function will be canceled. However,
if the charging cable has already been connected to the vehicle, charging will
commence immediately.
The charging timer indicator will
turn off if the schedule is canceled.
Step 1 Pull the charging connector toward you while pressing the latch release
button.
Step 2 Attach the charging connector cap.
Step 3 Close the charging inlet cap, and then close the recharge inlet door.
- Hold the body of the plug while
removing.
- Make sure to put the cable away
immediately after disconnecting.
- When leaving the plug inserted, check
the plug and connector once a month
for accumulation of dirt or dust.
Step 4 Remove the plug from the outlet when the charging equipment will not be
used for a long period of time.
After charging
2013Scion-iQ-EV.indd 17 1/14/13 6:49 PM
18
ELECTRIC VEHICLE SYSTEM
Remaining charging time Charging information is displayed on the
Multi-Information Display.
If the POWER switch is turned to ON mode during charging, the estimated amount
of time needed for charge completion will be displayed.
After confirming, switch the POWER switch to OFF to turn off the display. The
POWER switch will turn off automatically after approximately two minutes.
Multi-Information Display-Charging
information
Charging information and warning messages The first time the POWER switch is
turned to ON mode after charging is completed, a message detailing the results
of the charge is shown. Also, if an operation that cannot be carried out during
charging was attempted, a warning message will be shown.
Remote Climate Control
While charging with an external power source, the heater or Air Conditioning
can be operated before getting in the vehicle. If the Air Conditioning system is
remotely activated while charging, charging will stop but resume when the Air
Conditioning system goes off.
Before leaving the vehicle
The Remote Climate Control will operate in accordance with the temperature
settings of the Air Conditioning system, so be sure to check the settings before
leaving the vehicle.
Activating the Remote Climate Control
- Press and hold the “ ” button.
- The system will shut off if a door is
opened. The system can be stopped by
pressing the “
” button twice.
2013Scion-iQ-EV.indd 18 1/14/13 6:49 PM
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/