Chevrolet Uplander 2008 Navigation Guide

Overview

........................................................ 1-1

Overview

.................................................. 1-2

Features and Controls

..................................... 2-1

Features and Controls

................................ 2-2

Navigation Audio System

................................ 3-1

Navigation Audio System

............................ 3-2

Index

................................................................ 1

2008 Chevrolet Uplander and

Pontiac Montana SV6 Navigation System

M

GENERAL MOTORS, GM, the GM Emblem, BUICK,

and the BUICK Emblem, CHEVROLET, the

CHEVROLET Emblem, PONTIAC, the PONTIAC

Emblem, and the names UPLANDER, MONTANA,

TERRAZA, and SV6 are registered trademarks of

General Motors Corporation.

Dolby

®

is manufactured under license from Dolby

®

Laboratories. Dolby

®

and the double-D symbol

are trademarks of Dolby

®

Laboratories.

Litho in U.S.A.

Part No. 25848002 A First Printing

©

ii

The information in this manual supplements the owner

manual. This manual includes the latest information

available at the time it was printed. We reserve the right

to make changes in the product after that time without

notice. For vehicles ﬁrst sold in Canada, substitute

the name General Motors of Canada Limited for Buick

Motor Division, Chevrolet Motor Division, or Pontiac

Division whenever it appears in this manual.

Keep this manual with the owner manual in the vehicle,

so it will be there if it is needed. If the vehicle is sold,

leave this manual in the vehicle.

Canadian Owners

A French language copy of this manual can be obtained

from your dealer/retailer or from:

Helm, Incorporated

P.O. Box 07130

Detroit, MI 48207

1-800-551-4123

www.helminc.com

Propriétaires Canadiens

On peut obtenir un exemplaire de ce guide en français

auprès de concessionnaire ou à l’adresse suivante:

Helm Incorporated

P.O. Box 07130

Detroit, MI 48207

1-800-551-4123

www.helminc.com

iii

✍ NOTES

iv

Overview .........................................................1-2

Navigation System Overview ............................1-2

Getting Started ...............................................1-4

Cleaning the Video Screen .............................1-10

Section 1 Overview

1-1

Overview

Navigation System Overview

1-2

A. X (Tilt Open/CD Eject) Key. See “Hard Keys”

under Using the Navigation System on page 2-2.

B. Directional Indicator. See Symbols on page 2-7.

C.

X (DVD Eject) Key. See “Hard Keys” under Using

the Navigation System on page 2-2.

D. CD Loading Slot. See CD Player on page 3-9.

E. DVD Loading Slot. See “Loading a DVD Map Disc”

under Getting Started on page 1-4.

F.

P (Power/Volume) Knob. See “Hard Keys” under

Using the Navigation System on page 2-2.

G. NAV (Navigation) Key. See “Hard Keys” under Using

the Navigation System on page 2-2.

H. NAV RPT (Navigation Repeat) Key. See “Hard

Keys” under Using the Navigation System on

page 2-2.

I. BAND Key. See “Playing the Radio” under

Navigation Audio System on page 3-2.

J.

w SEEK x Key. See “Finding a Station” under

Navigation Audio System on page 3-2.

K.

B (CD) Key. See CD Player on page 3-9.

L.

e (Audio) Key. See Navigation Audio System on

page 3-2.

M. CONFIG (Conﬁgure) Key. See “Hard Keys” under

Using the Navigation System on page 2-2.

N.

O (Tuning) Knob. See “Finding a Station” under

Navigation Audio System on page 3-2.

O.

V (Zoom In) Screen Button. See “Touch Sensitive

Screen Buttons” under Using the Navigation

System on page 2-2.

P. Dest (Destination) Screen Button. See “Touch

Sensitive Screen Buttons” under Using the

Navigation System on page 2-2.

Q. Nav (Navigation) Options Screen Button. See

“Touch Sensitive Screen Buttons” under Using the

Navigation System on page 2-2.

R. Nav

y (Navigation Menu) Screen Button. See

“Touch Sensitive Screen Buttons” under Using the

Navigation System on page 2-2.

S.

U (Zoom Out) Screen Button. See “Touch Sensitive

Screen Buttons” under Using the Navigation

System on page 2-2.

T. Clock. See “Clock” under Conﬁgure Menu on

page 2-32.

1-3

Getting Started

Before you begin to operate the navigation system, read

this manual thoroughly to become familiar with it and

to understand how the system works.

Keeping your mind on the drive is important for safe

driving. See “Defensive Driving” in the Index of

your vehicle’s owner manual for more information.

Get familiar with your vehicle’s navigation system so

you can use it with less effort and take full advantage of

its features. Your navigation system includes not only

navigation, but also audio functions. While your

vehicle is parked:

• Familiarize yourself with all of its controls: hard

keys on the faceplate and touch-sensitive screen

buttons.

• Familiarize yourself with its operation.

• Set up your audio by presetting your favorite

stations, setting the tone, and adjusting the

speakers. Then, when driving conditions permit,

you can tune to your favorite stations using the

presets and steering wheel controls (if equipped).

• Set up the navigation features that can only be done

before you begin driving, such as entering an

address or a preset destination.

Entering a destination or alphanumeric text requires

many steps, so you can only perform these operations

when the vehicle is in PARK (P). You will notice

that touch-sensitive screen buttons leading to the

alphanumeric keyboard are dimmed out while driving.

Other functions may also be locked out while driving and

they too will appear grayed out on the screen — but

all functions are available when parked. Some functions

can be performed while driving, as long as you can

do so without diverting too much of your attention from

your driving.

{CAUTION:

This system provides you with a far greater

access to audio stations and song listings.

Giving extended attention to entertainment

tasks while driving can cause a crash and you

or others can be injured or killed. Always keep

your eyes on the road and your mind on the

drive — avoid engaging in extended searching

while driving.

1-4

{CAUTION:

Looking at the moving map on the navigation

screen frequently or for too long while driving

can cause a crash and you or others can be

injured or killed. Keep your eyes and mind on

the road and avoid looking too long or too often

at the moving map on the navigation screen.

Use the voice guidance directions whenever

possible.

The navigation system allows you to do the following:

• Plan a route with provided turn-by-turn route and

map guidance with voice prompts.

• Select a destination using various methods and

choices.

You should always be alert and obey traffic and roadway

laws and instructions, regardless of the guidance from

the navigation system. The navigation system uses

street map information that does not include all traffic

restrictions or the latest road changes, it may suggest

using a road that is now closed for construction or a turn

that is prohibited by signs at the intersection. The system

uses limited information, you must always evaluate

whether following the system’s directions is safe and

legal for the current conditions.

Every ﬁfty times the vehicle is started and the navigation

system is turned on, the CAUTION screen will appear.

Touch the Next screen button for the map DVD

information to load. You can also select to change the

language, Eng (English) or Fr (French). See “Language”

under Conﬁgure Menu on page 2-32 for more

information.

When getting started you may set the navigation system

to your preference or delete information you may have

entered using various options. To do so, reference the

following topics.

1-5

Deleting Personal Information

This navigation system can record and store destinations.

At times, such as when you are disposing of your vehicle,

you may want to delete these destinations. Refer to the

following sections to delete the destination information

that has been stored.

See “Delete” under “Edit Route” under Navigation Menu

on page 2-9 for deleting the current destination.

See “Memory Points”, “Preset Dest.” (Destination),

“Register Home” and “Del. Prev. Dest.” (Delete Previous

Destination) under “Memory Points” under Navigation

Menu on page 2-9 for deleting stored destinations.

Storing Radio Station Presets

To set preset radio stations, do the following:

1. Press the power/volume knob to turn the system on.

2. Press the BAND hard key to access the band menu

and select the desired band (AM, FM1, FM2, XM1,

or XM2 (if equipped).

3. Use the tuning knob or the SEEK hard key arrows

to select a station.

4. Touch and hold one of the six screen buttons at the

bottom of the screen until you hear a beep or see

the station displayed on the selected preset button.

Setting the Time

To set the time, do the following:

1. Press the power/volume knob to turn the system on.

2. Press the CONFIG hard key.

3. Touch the Clock screen button.

4. Scroll through the Time Zones until the desired time

zone is highlighted.

5. Touch the Daylight Savings screen button.

The time is now set. Touch the Manual Adjust screen

button if you need to further adjust the time. The radio

will use the GPS satellite to set the time. The vehicle

needs to be in an open area to receive the signal.

See Global Positioning System (GPS) on page 2-35 for

more information.

Loading a DVD Map Disc

To load a DVD map disc, do the following:

1. Press the power/volume knob to turn the system on.

2. Press and hold the eject key, for about 10 seconds,

to tilt the screen forward.

3. Insert the DVD map disc into the DVD slot.

Notice: Pressing directly on the navigation screen

may cause damage. Repairs would not be covered

by your warranty. Do not press directly on the

navigation screen.

1-6

4. To close the screen, slightly push up on the two

outer top corners until the screen is in position,

then push the screen in, by pushing on the

four outer corners, until you hear a click.

5. A notice may appear. Touch the Next screen button

to proceed.

Entering an Address, Point of Interest,

Home, and Preset Destinations

Before entering an Address, Point of Interest, Home, or

Preset Destination, select the appropriate search

area that contains the ﬁnal destination. Your vehicle

must be in PARK (P) to perform this operation.

Setting the Search Area

To set the search area, do the following:

1. If a DVD map disc is not currently loaded, see

“Loading a DVD Map Disc” earlier in this section.

If a map disc is currently loaded, proceed to Step 2.

2. Press the power/volume knob to turn the system on.

3. Touch the Dest screen button.

4. Touch the Change screen button.

5. Touch the appropriate Search Area numbered

screen button that contains your ﬁnal destination.

The system will return to the Destination menu.

Entering an Address

You can set a destination by entering an address.

To enter an address, do the following:

1. If a DVD map disc is not currently loaded, see

“Loading a DVD Map Disc” earlier in this section.

If a map disc is currently loaded, proceed to Step 2.

2. Press the power/volume knob to turn the system on.

3. Touch the Dest screen button.

4. Verify that the selected Search Area is correct.

5. Touch the Address screen button.

6. Enter the city name using the alpha keypad on the

screen.

7. Select the city name from the list by touching the

screen button next to the correct city name.

8. Enter the street name using the alpha keypad on

the screen.

Do not enter directional information or street type,

and use the space symbol screen button (

U )

between street or city names. For example, the

street name N. Royal Oak Rd. should be entered as

royal

U oak. Use the backspace ( V)

screen button if an incorrect character has been

entered.

1-7

9. Select the desired street name from the list by

touching the screen button next to the correct

street name.

10. Enter the address number using the numeric

keypad on the screen. You may ﬁrst have to select

the correct range for the address number, then

enter the desired address and touch the OK screen

button. The map screen will display.

11. Touch the Set Destination screen button.

The address entry is now complete.

12. Touch the Route screen button.

13. Touch the Start screen button.

14. Once you begin driving you will hear an audio

prompt to “Proceed to the highlighted route.”

You are now in route guidance mode.

Entering a Point of Interest (POI)

To set a destination by entering a Point of Interest

(POI), do the following:

1. If a DVD map disc is not currently loaded, see

“Loading a DVD Map Disc” earlier in this section.

If a map disc is currently loaded, proceed to Step 2.

2. Press the power/volume knob to turn the system on.

3. Touch the Dest screen button.

4. Verify that the selected Search Area is correct.

5. Touch the POI screen button.

6. Enter the speciﬁc title of the POI in the Name

space (i.e. Washington Monument) using the

alpha keypad on the screen.

• If there are POIs with the same name, spell out

the name and then touch the List screen button

(McDonald’s restaurant vs. McDonald corporate

office).

• Select the business desired.

• The system will list the POIs in alphabetical

order or, if there are multiple POIs with the same

name, the system will list the POIs in order of

distance from your location.

• Touch the screen button next to the address of

the POI desired.

7. Touch the Set Destination screen button. The POI

entry is now complete.

8. Touch the Route screen button.

9. Touch the Start screen button.

10. Once you begin driving you will hear an audio

prompt to “Proceed to the highlighted route.”

You are now in route guidance mode.

Using the Category or City selections will aid the system

in ﬁnding the POI by limiting the search options.

1-8

Setting Home Destination

1. If a DVD map disc is not currently loaded, see

“Loading a DVD Map Disc” earlier in this section.

If a map disc is currently loaded, proceed to Step 2.

2. Press the power/volume knob to turn the system on.

3. Touch the Nav

y (navigation) menu screen

button.

4. Touch the Memory Points screen button.

5. Touch the Register Home screen button.

6. Touch the Address screen button and then enter all

address information.

7. Touch OK. The map screen will display.

8. Touch the Register Point screen button to store the

home address as a memory point.

The home symbol will now be available on the

Destination screen. See “Using Your Home

or Preset Destinations” later to use the home

destination as a planned route.

Setting Preset Destinations

1. If a DVD map disc is not currently loaded, see

“Loading a DVD Map Disc” earlier in this section.

If a map disc is currently loaded, proceed to Step 2.

2. Press the power/volume knob to turn the system on.

3. Touch the Nav

y (navigation) menu screen

button.

4. Touch the Memory Points screen button.

5. Touch the Register screen button under the Preset

Dest. column.

6. Touch one of the ﬁve preset buttons.

7. Touch the Address screen button and then enter

the address information.

8. Touch OK. The map screen will display.

9. Touch the Register Point screen button to store the

memory point.

The preset destination number will now be available

on the Destination screen. See “Using Your

Home or Preset Destinations” later to use preset

destinations as a planned route.

1-9

Using Your Home or Preset

Destinations

These destinations are available for selection while

driving.

1. If a DVD map disc is not currently loaded, see

“Loading a DVD Map Disc” earlier in this section.

If a map disc is currently loaded, proceed to Step 2.

2. Press the power/volume knob to turn the system on.

3. Touch the Dest screen button.

4. Touch the

L (Home symbol) or one of the available

Preset Destination symbols at the bottom of the

Destination screen. The map screen will display.

5. If currently driving on a route, touch the Set

Destination screen button. The system will calculate

the new route. If you are not currently driving on

a route, the system will automatically calculate

a route to the home or preset destination selected.

6. Touch the Route screen button.

7. Touch the Start screen button.

8. Once you begin driving, or if you are already

driving, you will hear an audio prompt to “Proceed to

the highlighted route.” You are now in route

guidance mode.

Canceling Guidance

Guidance will be canceled once you arrive at your ﬁnal

destination. To cancel guidance prior to arrival at the

ﬁnal destination, do the following:

1. From the map screen, touch the Nav Options

screen button.

2. Touch the Cancel Route screen button.

3. Touch the Yes screen button to conﬁrm

cancellation.

Cleaning the Video Screen

When cleaning the video screen, use only a soft clean

cotton cloth dampened with clean water.

1-10

Features and Controls ......................................2-2

Using the Navigation System ...........................2-2

Maps ............................................................2-5

Symbols ........................................................2-7

Navigation Menu ............................................2-9

Destination ..................................................2-18

Colors on the Screen ....................................2-31

Conﬁgure Menu ............................................2-32

Global Positioning System (GPS) ....................2-35

Vehicle Positioning ........................................2-36

Problems with Route Guidance .......................2-37

If the System Needs Service ..........................2-38

Ordering Map DVDs ......................................2-38

Database Coverage Explanations ....................2-38

Section 2 Features and Controls

2-1

Features and Controls

Using the Navigation System

This section includes the basic information to operate

the navigation system.

The main navigation menu displays a number of options

which offer information on a variety of topics. See

Navigation Menu on page 2-9 for more information.

Use the hard keys located on the navigation system

along with the available touch-sensitive screen buttons

on the navigation screen to operate the system.

Once the vehicle is moving, various functions will be

disabled to reduce driver distractions.

Hard Keys

The following hard keys are located to the left of the

navigation screen:

P/ v (Power/Volume Knob): Press the

power/volume knob to turn the audio and navigation

system on and off. Turn the knob to increase or

decrease the volume to the audio system.

NAV RPT (Navigation Repeat): Press the NAV RPT

key to repeat the current voice guidance navigation

prompt.

NAV (Navigation): If you are in a menu and are not on

the map screen, press the NAV key to view the map

showing your vehicle’s current position.

If a route has not been planned, press this key to

display the map screen and the following information:

• North or Heading Up symbol

• Time

• Map scale

If a route has been planned, press this key to display

the map screen and the following information:

• Number of miles/kilometers between current vehicle

position and the destination. See “Route Overview

Menu” under Destination on page 2-18 for more

information.

• Estimated travel time to the destination. See “Route

Overview Menu” under Destination on page 2-18 for

more information.

• Highlighted route or turn-by-turn instructions.

See “Map Appearance” under Navigation Menu on

page 2-9 for more information.

You will ﬁnd more information on each feature found on

a map screen later in this manual.

2-2

BAND: Press the BAND key to access the BAND

screen and to switch between AM, FM1, FM2, XM1, or

XM2, if equipped. See “Finding a Station” under

Navigation Audio System on page 3-2.

xSEEK w: Press the SEEK up or down arrows to

go to the next or previous radio station or tracks on

a CD. See “Finding a Station” under Navigation Audio

System on page 3-2 or CD Player on page 3-9.

B (CD): Press the CD key to play a CD. The CD

screen will display. See CD Player on page 3-9.

e(Audio): Press the audio key to access the Audio

menu. See Navigation Audio System on page 3-2.

CONFIG (Conﬁgure): Press the CONFIG key to access

the Conﬁgure menu. See Conﬁgure Menu on page 2-32

for more information.

O (Tuning) Knob: Turn the tuning knob to go to the

next or previous frequency. See “Finding a Station”

under Navigation Audio System on page 3-2.

X (Tilt Open/CD Eject) Key: Press the eject key

located next to the CD slot to eject a CD.

Press and hold the eject key, for about 10 seconds, to

tilt the screen forward to access the map DVD slot.

See “Loading a DVD Map Disc” under Getting Started

on page 1-4 for more information on loading the

map DVD.

X (DVD Eject) Key: Once the screen is tilted forward,

press this eject button to eject the map DVD.

Alpha-Numeric Keypad

Letters of the alphabet, symbols, punctuation, and

numbers will display on the navigation screen as an

alpha or numeric keypad. The appropriate keypad

will automatically display whenever the system needs

information from you. The alpha keypad will display

when the system needs input of a city or street name.

The numeric keypad will display when the system needs

input of a phone number or house address.

2-3

Touch a character on the screen to select it. You may

also touch the 0 - 9 screen button at any time from

the alpha keypad to access the numeric keypad.

U(Space): Touch this screen button to enter a

space between characters or the words of a name.

V(Backspace): Touch this screen button if an

incorrect character has been selected.

To make name selections easier, the system will only

allow you to select a character which can follow the last

one entered. For example, if a Z is entered, a T will

not be available to select. The system will highlight the

available characters.

If a name is not available after input, it may need to be

inputted differently, the map DVD database may not

contain that information, or the correct search area has

not been selected. See Database Coverage

Explanations on page 2-38.

Touch-Sensitive Screen Buttons

Touch-sensitive buttons are located on the screen.

After selecting a button on the screen, a beep will sound.

This feature can be turned off. See Conﬁgure Menu on

page 2-32 for more information. Screen buttons will be

highlighted when available. There are some toggle

screen buttons that will be light in color when active.

The following touch-sensitive screen buttons will appear

frequently at the bottom of a map screen:

Dest (Destination): Touch this screen button to display

the Destination menu. See Destination on page 2-18 for

more information.

2-4

Nav (Navigation) Options: Touch this screen button to

display the Nav Options menu. See “Navigation

Options” under Destination on page 2-18 for more

information.

Nav

y (Navigation Menu): Touch this screen button

to display the main navigation menu. See Navigation

Menu on page 2-9 for more information.

V (Zoom In): Touch this screen button to get a closer

look at a smaller section of the route you are traveling.

U (Zoom Out): Touch this screen button to see a

larger scale of the route you are traveling. You can also

view your highlighted route.

Clock: Touch the clock screen button, when the radio

is on, to display the date.

Audio Source: Touch the audio source screen button,

while a map screen is displayed, to access the Audio

screen.

Back: Touch this screen button, when available on a

menu, to return to the previous screen.

Maps

This section includes basic information about the map

database.

Map Coverage

The maps are stored on a DVD-ROM. The 48 contiguous

United States, Hawaii, and Canada are contained on

one disc.

Refer to the “Navigation System Map Disc” manual to

view a detailed explanation of map coverage and detailed

city lists in each region. This manual will be in the map

DVD case when the vehicle is delivered from the factory.

Installing the DVD Map Disc

Your dealer/retailer may have installed the map DVD.

If the DVD was not installed, do the following to load it:

1. Turn the ignition on.

2. Press and hold the eject key, for about 10 seconds,

to tilt the screen forward.

3. Load the map DVD into the DVD slot by inserting it

partway. The system will pull it in.

Notice: Pressing directly on the navigation screen

may cause damage. Repairs would not be covered

by your warranty. Do not press directly on the

navigation screen.

2-5

4. To close the screen, slightly push up on the two

outer top corners until the screen is in position,

then push the screen in, by pushing on the

four outer corners, until you hear a click.

Once the screen is closed, you will have the following

two language choices:

• ENG (English)

• FR (French)

Select the language at this time. See “Language” under

Conﬁgure Menu on page 2-32 for more information.

Once a language has been selected, touch the NEXT

screen button to plan a route. The map will appear

showing your current vehicle position.

Ejecting the DVD Map Disc

When the DVD map disc is not loaded, you will not be

able to use the navigation portion of the system.

1. Turn the ignition on.

2. Press and hold the eject key to tilt the screen

forward.

3. Once the screen is tilted forward, press the eject

key next to the DVD map disc slot. The disc

will eject.

Notice: Pressing directly on the navigation screen

may cause damage. Repairs would not be covered

by your warranty. Do not press directly on the

navigation screen.

4. To close the screen, slightly push up on the two

outer top corners until the screen is in position,

then push the screen in, by pushing on the

four outer corners, until you hear a click.

Handling the DVD Map Disc

When handling the DVD map disc, be careful of the

following:

• Handle the disc very carefully to avoid

contamination or ﬂaws. Signals may not read out

properly if the disc gets contaminated or ﬂawed.

• If the disc gets soiled, use a soft cloth to gently wipe

it out from the center of the disc to the outside.

Do not use photographic record cleaner, solvents,

or other cleaners.

• Do not use the disc to rest on while writing or

drawing using any writing utensil or attach a seal to

any of the sides or the disc.

• Do not keep the disc in direct sunlight, high

temperatures, or humidity.

• After using the disc, place it back into the

original case.

2-6

Page is loading ...

Chevrolet Uplander 2008 Navigation Guide

This manual is also suitable for

Chevrolet Uplander 2008 Navigation Guide

Related papers

Other documents