Alcatel OneTouch ONE TOUCH X715 User manual

Brand: Alcatel OneTouch

Model: ONE TOUCH X715

Category: Cellular wireless network equipment

Type: User manual

This manual is also suitable for

X715

 1

UserManual



TableofContents



1.SafetyandUse........................................................................2

2.InstallationGuide....................................................................3

3.MainInterfaceOverview........................................................4

4.ConnecttoInternet................................................................5

5.Statistics..................................................................................6

6.Communication......................................................................7

7.Settings.................................................................................10

8.Browser.................................................................................12

9.Warranty...............................................................................12

10.FAQs....................................................................................14

11.Certification.........................................................................15



 2



1.SafetyandUse

Werecommend that you readthis chaptercarefullybeforeusing yourmodem. The

manufacturerdisclaimsanyliabilityfordamage,whichmayresultasaconsequence

of improper use of the modem or of use contr ary to the instructions contained

herein.



TrafficSafety

Whendriving,donotusethemodem:

 Whenswitchedon,themodememitselectromagneticwavesthatcaninterfere

withthevehicle’selectronicsystemssuchasABSanti‐lockbrakesorairbags.To

ensurethatthereisnoproblem,pleasedonotplacethemodemontopofthe 

dashboardorwithinanairbagdeploymentarea.

 Check with your car dealer or the car manufacturer to make sure that the

dashboardisadequatelyshieldedfrommodemRFenergy.



ConditionsofUse

1. Switchthemodemoffbeforeboardinganaircraft.

2. Switch the modem off when you are in health car e facilities, ex cept in

designated areas. As with many other types of equipment now in regular use,

mobileTele‐modemscaninterferewithotherelectricalorelectronicdevices,or

equipment‐usingradiofrequencies.

3. Switchthemodemoffwhenyouareneargasorflammableliquids.Strictlyobey

all signs and instructionsposted in a fuel depot, petrol station, chemicalplant,

orinanypotentiallyexplosiveatmosphere.

4. When the modem is switched on, it should be kept at least 15 cm from any

medicaldevicesuchasapacemak er,ahearingaidorinsulinpump,etc.

5. Do not let children use the modem without supervision. The modem may

containsmallpartsthatcouldbecomedetachedandcreateachokinghazard.

6. Whenreplacingthecover,pleasenotethatthemodemmaycontainsubstances

thatcouldcreateanallergicreaction.

7. Alwayshandlethemodemwithcareandkeepitinacleananddust‐freeplace.

8. Do not allow the modem to be exposed to adverse weather or environmental

conditions(moisture,humidity,rain,infiltrationofliquids,dust,seaair,etc).The

manufacturer’srecommendedoperatingtemperaturerangeis‐10°Cto+50°C.

9. Donotopen,dismantleorattempttorepairthemodemyourself.

10. Donotdrop,throworbendthemodem.

 3

11. Donotpaintthemodem.



CollectionPoint:

Thissymbolonthemodemmeansthatitmustbetakentocollectionpointsat

theendoftheirlife:

 Municipalwastedisposalcenterswithspecificbinsfortheseitemsofequipment

Collectionbinsatpointsofsale.

 They will then be recycled, preventing substances being disposed of in the

environment,sothattheircomponentscanbereused.



InEuropeanUnioncountries:

Thesecollectionpointsareaccessiblefreeofcharge.

Allproductswiththissymbolmustbebroughttothesecollectionpoints.



InnonEuropeanUnionjurisdictions:

Itemsofequipmentwiththissymbolarenottobethrownintoordinarybinsifyour

jurisdictionoryourregionhassuitablerecyclingandcollectionfacilities;insteadthey

aretobetakentocollectionpointsforthemtoberecycled.

In the United States, please visit www.recyclewirelessphones.org for more

informationonrecyclingwirelessproducts.



Protectionagainsttheft

ThemodemisidentifiedbyanIMEI(modemserialnumber)shownonthepackaging

labelandinthemodem’sdashboard. Werecommendthatyounotethenumberthe

firsttimeyouusethemodembyopeningthedashboard“Settings”>“Diagnostics”to

getit.



Disclaimer

There may be certain differences between the user manual description and  the

modem’s operation, depending on the software release of the modem or specific

operatorservices.



2.InstallationGuide



2.1InstallationGuideforWindows

InstallationproceduresmayvarybasedontheoperatingsysteminstalledonyourPC.

ThefollowinginstructionsarebasedontheWindowsXPOS:



 4

Turnonyour PC and plug the modem intotheUSB interface slot to begin software

installation. Windows should automatically detect the new device and will prompt

youtobegininstallation.



Afterfollowingthepromptsofinstallationsetup,uponcompletion,ashortcutwillbe

placedonyourdesktopforquickfutureaccess.

Note:

1. If installation “auto‐run”  does not begin, you will need to locate the

“autoRun.exe)” file in the driverpath, and Double‐Click onAutoRun.exetorun

theinstallationmanually.

2. AMicro‐SDcardisanoptionalaccessory.

3. Please do not remove the USIM/SIM card or the Micro‐SD card when the

modemisinuse.



UponsuccessfulinstallationoftheUSBmodemprogram,theprogramwilllaunch

automatically.Youmayalsodouble‐clicktheshortcuticononthedesktoptolaunch

theprogram.



2.2InstallationGuideforMac

Thismanualdescribestheoperationsoftheconnectapplication.

ThisapplicationrequiresMACOSX10.4.9or10.8



1. To install the modem connect applicationon MAC OS X. Please double‐click the

fileMyConnection.pkg

2. ClickContinue

3. SelectthePartitiontoinstallthe applicationandclick“ContinueInstallation”

4. When the installation is finished, you needto restart your computer to use the

modem.

5. Clicking Application>My Connection to start the connect application. You may

reservethisapplicationintheDocktoaccessitfaster.



3.MainInterfaceOverview

ShortCutIcons

FollowingtablearelistedShortCutIconsinPCSuiteInterface.



InterfaceIcons ProvidedServices

 5

Connection DisplayConnectInterface.

Communication DisplayPhonebookandTextMessageInterface

Statistics Querythestatisticsofthetransferreddata.

Settings DisplaytheSettingsMenu.

Browser OpentheBrowser

Help OpenUserManual

Statusinformation

FollowingtablearelistedtheIconsofstatusbarinformation

ConnectionStatisticsIcon Description

NetworkSignal Indicatesthesignalstrengthofthenetwork

NetworkStatus Indicates the network status. This will display the operator

name which the modem can find the network. Or show the

modemhaven’tready.<No(U)SIM>or<NODevice>

NetworkType Display in the status bar, toshowyou which network you are

using(GPRS/EDGE/UMTSorHSPA)



Roaming

RoamingIcon“ ”,whenthenetworkisunderroaming

NewMessage DisplaytheSMSstatusincludingnewSMS/SIMcardmemoryis

full/DataCardmemoryisfull

NetworkConnecting

Connecting Icon “ ” display in the status bar, when the

networkisconnectedintointernetnetwork

LEDIndication

FollowingtablearelistedtheLEDIndicatesforeachstatus.

LEDIndicator Desctiption

FlashingGreen&Redmulticolourcircularly NetworkSearching

Quickly Flashing Green & Red multicolour

circularly

Outoforder

GreenLightSlowFlashing Registeringinto3Gnetwork

ConstantGreenLight Registeredto3Gnetwork

RedLightSlowFlashing Registeringinto2Gnetwork

ConstantRedLight Registeredto2Gnetwork



4.ConnecttoInternet



1.Connectingwiththedefaultlogonprofile

 6

IfyouwanttoconnecttotheInternetwithoutsettinganyuser‐definedorpredefined

profiles, press icon of “connect”. The default connection profile will be used in

accordancewithyourUSIM/SIMcard.



Connecting

• Clickon<Connect>fromthehomepage;

• Waitseveralsecondsuntiltheconnectionisestablished;

• Onceyouareconnected,Iconof<Connect>willchangeinto<Disconnect>.



Disconnecting

ClickonIconof<Disconnect>fromthehomepagetodisconnectfromtheInternet.



2.Connectingwithauser‐definedlogonprofile

Clickonsettingsiconandselectthe<ConnectionProfile…>menutoopentheprofile

settingwindow.



Addinganewconnectionprofile

• Clickon<Settings> andselecttheconnectProfiletoaddanewconnection

• If<ADD>isselected,thenewconnectionprofilewindowswillpopup.

• Pleaseentertheinfoofrequested;

• Account (Connection Naming), Number, APN, User Name, password and fina l

choicewhichAuthTypeyouareusingbymanually;

• Click<OK>

• Please select you preferred network and click on <Set Default> to default your

connectionsetting.



Note：Users may obtain Number, APN Code, User Name, Password and Auth type

informationfromnetworksprovider.



5.Statistics 

ClickonStatistics iconfromthemain interfaceofPCSuitetoaccessthestatistics of

thetransferreddata.



1. CurrentSession

y ClickPage<CurrentSession> inStatisticsinterface;

y Diagramofthetransferreddataforcurrentsessionwi ll display.



 7

2. StatisticsforPeriod

y ClickPage<StatisticsforPeriod>inStatisticsinterface;

y Selectthestartandenddateoftheperiod;

y Clickon<Display>,thestatisticsdataoftheperiodyouchoosewillpresent.

6.Communication



6.1SMSServices(TextMessage)

ClickCommunicationiconfromthemaininterfaceofthePCsuitetoaccesstheSMS

service.



1.DisplayingthereceivedSMS

Whenanewmessageisreceived,amessageboxappearsinthestatusbar.



y Clickthecontentofthechosenmessage.Youmayalsodisplaythecontentonthe

messagewindow.



Note: Received SMS will be saved the modem. If the modem Memory is full, the

messagewillsavedonUSIM/SIM



2.NewSMS

y Clickon  inthetoolbar.AnSMScreationwindowwill popup;

y Enterthetext.



3.Send

(1)Youmayenterarecipient’snumberin3ways:

y Enter the  number directly. If there are two or more recipients, use “;” to

separateeach;

y Enterthenameofarecipientsavedinthephonebook;

y ClickIconofSMSinthepopup thewindowtoaccesstherecipient’ sselection

window. Select one party, or more (using the ctrl/shift key), and the click on

<OK>toaddthe chosenparty(ies)totherecipientlist.

 (2)Clickon<Send> tosendthemessage.Ifthemessageisnotsent,itwillbesaved

intheOutbox.



4.Reply

y Selectamessageintheinboxandthenclickon  inthetoolbar;

 8

y Therecipient’ s/numberwillappear.Itcannowbemodified;

y Enterthereplyininputfield,andthenclickon<Send>.



5.Forward

y Selectamessageandthenclickon  inthetoolbar;

y Thecontentoftheselectedmessagewillappearintheinputfield.Itcannowbe

modified;

y Entertherecipient’snumberandthenclickon<Send>.



6.Edit

y Accessthedraftlisttoselectamessage,andopenitbydouble‐clickingonit;

y Clickon<Save>or<Send>whenyouhavefinishedediting.



7.Delete

y Selectamessage,orseveralmessages(usingthectrl/shiftkey);

y Click on  in the tool bar. A dialog box will ask “Are you sure to delete the

message(s)?”

y Clickon<OK>andtheSMSwillbedeleted.Oncedeleted,SMSmessagescannot

berestored.



8.Resend

y Access the Outbox to select a message or several messages (using the ctrl/shift

key);

y Clickon  inthetoolbar;

y Theapplicationwillresendtheunsent/sentmessage(s).



6.2Contacts

Click contacts from the Communication interface of PC suite to access the contacts

management.



Thecontactslistcolumncontains:(U)SIM/Modem/Computer.Youcanusecontacts

storedeitheronthe(U) SIM,modemoroncomputerinthecorrespondingwindow.



1.New

 9

y Select  fromthetoolbartoaccessthecontactseditor;

y Enter the relevant information, and press<OK>;thenewcontact will appearin

thecurrentcontactlist.



2.Edit

y Select a contact and access the contact editor by selecting  from the tool

barorbydouble‐clickingonthecontact;

y Modifytherelevantcontactinformation,andselect<OK>tosavethechanges.



3.Delete

y Selectonecontact,ormore(usingthectrl/shiftkey);

y Clickon  fromthetoolbar.Adialogboxwillask“Areyousuretodeletethe

contacts?”;

y Click on <OK> and the contact(s) will be deleted; deleted contacts will not be

restored.



4.SendSMS

y Selectonecontactormore(usingctrl/shiftkey);

y Clickon  inthetoolbar;

y Whenthemessageiscompleted,youmaysenditbyclickingon<Send>.



5.Search

y Select  fromthetoolbartoaccessthecontactssearch;

y Enterthecontactinformation.



Note:

y Youcanenterpartofthecontactinformationtosearch.Eachfieldofthecontact

canbesearchedin.

y Whenyousearchthecontact,contactlistisupdatedautomaticallyaccordingto

your entered information. The matching contacts in the searched group are

displayed. None isdisplayed when no matching contact can be searched in the

group.



 10

6.Copyto(U)SIMcard/Modem/Computer

y Selectonecontact,ormore(usingctrl/shiftkey)storedinthesamememory;

y Right‐Clickyourmousepointer,ifselected<Copyto>inthemanualandselecta

targetmemorydifferentfromthememorybeingused;

y Contact(s)willbecopiedtothetargetmemory.





7.Settings

Click on settings icon from the main interface of PC Suite. A menu with various

settingswillappear.



1. Networksettings

a.Networkselect

y Select<Networksettings>intheSettingsmenu.Thedefaultsettingis<Auto>;

y Clickon<Manual…>toactivatethenetworklistwindow;

y Alistofnetworksappearswhenthesearchiscomplete;

y Click<Search>anavailablenetworkfromthelistofavailableoperatorsandclick

on<Select>.Itwillregistertheselectednetwork.



b.Networkmode

y Select<Networksettings>inSettingsmenu.Thedefaultsettingis<Auto>;

y Clickonthemodewhichyouprefer,itwillsearchandregisterthenetworkmode

whichwaschosenatnexttimeofdeviceconnection.



2. Connectionprofilesettings

Select<Connection profile…> in the Settings menu to access the connection profile

settingwindow.



<ADD>

Addinganewconnectionprofile

Clickon<Settings> andselecttheconnectProfiletoaddanewconnection



• If<ADD>isselected,thenewconnectionprofilewindowswillpopup;

• Pleaseentertheinfoofrequested;

• Account (Connection Naming), Number, APN, User Name, password and fina l

choicewhichAuthTypeyouareusingbymanually;

• Click<OK>;

 11

• Please select you preferred network and click on <Activate> to default your

connectionsetting.



<Edit>

y Selectanitemintheconnectionprofilelist;

y Clickon<Edit>toaccesstheprofileeditwindow;

y Modifytheparametersandclickon<OK>tosavethemodification.



<Delete>

y Selectanitemintheconnectionprofilelist;

y Clickon<Delete>onthekeyboard.Youwillbeaske d“Areyousuretodelete?”;

y Choose<OK>todeletetheprofilefromthelist.



<Setdefault>

y Selectanitemintheconnectionprofilelist;

y Clickon<Setdefault>tosetupadefaultconnectionprofile.



3.  SMSsettings

Choose<SMSsettings>intheSettingsmenutoaccesstheSMSsettingswindow.

y ServiceCenter:ThedefaultnumberisfoundintheSIMcard.Youmaychangeit.

y Validityperiod:Youcanchoosebetween:6hours/1day/1week.

y Message Alert: You can choose Turn on/Turn off to validate  the message alert

sound.

y Deliveryreport:YoucanchooseTurnon/Turnofftovalidatethedeliveryreport.



4. Systemsettings

Click  to validate the sound prompt when the Internet wi ll  be connected/

disconnected.



5. Securitysettings

a.Re questPIN

y Clickonthe<Securitysettings>menuandselect<Enable/DisablePIN>.Activate

thePINinputdialogbox;

y Select<EnablePIN>andenterthecorrectPINcode;

Clickon<OK>.

b.ChangePIN

y  Clickon<ChangePIN>,andactivatethePINmodifydialogbox;

 12

y  InputtheoldPINandthenewPIN,thenconfirm;

y  Clickon<OK>toconfirmthenewPINcode.

Note:YoucanonlyaccessthemodifymenuifthePINisenabled.



6. Diagnostics

Thismenuisusedtodisplaythediagnosticinformation,including:

y ModelInformation:ModemName/Firmwareversion/IMEI/IMSI

y OperatorInformation:PINcodestatus/Networkcode/Networkselectionmode/

Networkmode/Signalstrength.

y Network Status: CS network registration/PS network registration/PS network

attachment



Notes:IfthePINcodeisenabled,pleaseenterthecorrectPINcodeintheentryfield,andclickon

<OK>.Youmaytryonly3timestoenterthecorrectPINcode;afterthreeincorrectattempts,the

USIMorSIMcardwillbeblocked.

A PUK dialog box will

then be displayed asking you to enter the right PUK code, PIN Code and

ConfirmedPIN.Clickon<OK>ifyoufailtoinputthecorrectPUKcodeafter10attempts,youwill

needtocontactyourserviceprovider.

IfthePUKandPINcodeiscorrect,theapplicationwillbe

launchedandallfeaturesareenabled



7. LanguageOption

ThismenuisusedtochangelanguageofPCSuite.



8.Browser

Click on Browser icon fromthemaininterfaceof PC Suite. A default homepage will

beopen.

9.Warranty

• Themodemiswarrantedagainstanydeviationfromtechnicalspecificationsfora

periodoftwelve(12)monthsfromthedatespecifiedonyouroriginalinvoice

.

• Under the terms of this warranty, you must immediately inform your vendor in

caseofaconformitydefectonthemodem,andpresentaproofofpurchase.

• The vendor or repair centre will decide whether to replace or repair, as

appropriatethemodem.

• Repaired or replaced modems are warranted ONE (1) month unless there are



1 The mandatory warranty period may vary if overriding statutory provisions are applicable in

your jurisdiction.

 13

statutoryprovisionstothecontrary.

• Thiswarrantyshallnotapplytodamageordefectstothemodemdueto:

1) Notfollowingoftheinstructionsforuseorinstallation,

2) Not being compliant with technical and safety standards applicable in the

geographicalareawherethemodemisused,

3) Improper maintenance of sources of energy, and of the overall electric

installation,

4) Accidents or consequences of theft of the vehicle in which the modem is

transported, acts of vandalism, lightning, fire, humidity, infiltration of liquids,

inclementweather,

5) Connectingtoorintegratingintothemodemanyequipmentnotsuppliedornot

recommendedbythemanufacturer,

6) Any servicing, modification or repair performed by individuals not authorised

themanufacture,thevendorortheapprovedmaintenancecentre,

7) Useofthemodemforapurposeotherthanthatforwhichitwasdesigned,

8) Normalwear,

9) Malfunctions caused by external causes (e.g., radio interference from other

equipment,powervoltagefluctuations),

10)Faultyconnectionsresultingfromunsatisfactoryradiotransmissionorcausedby

theabsenceofradiorelaycoverage.



• Warrantyisalso excludedforthemodemsonwhich markingsorserialnumbers

havebeenremovedoraltered.

• The modem is also warranted

 against hidden defects (defects inherent in the

design,manufacture,etc.).

• Thereareotherexpresswarrantiesthanthisprintedlimitedwarranty,expressor

implied,ofanynaturewhatsoever.

• In no event shall the manufacturer be liable for incidental or consequential

damages of any nature whatsoever, including but not limited

to trading loss,

commercialloss,tothefullextentthosedamagescanbedisclaimedbylaw.Some

countries/states do not allow the exclusion or limitation of incidental or

consequential damages, or limitation of the duration of implied warranties, so

theprecedinglimitationsorexclusionsmaynotapplytoyou.



 14

10.FAQs

1. Q: Whichoperationsystemsdoesthesoftwaresupport?

 A: ItsupportsWindowsXP,WindowsVista,Windows7/8 andMacOS.



2. Q: Icannotinstallthedriver

 A: OnsomePCs,installationofthemodemmaytakealongtime becauseofthe

PC configuration. So please wait and do not cancel the process or you will

havetouninstallandre‐installagain.



3. Q: What should I do if the main interface continues to display  “Searching

device”<”Initializing”>?

 A: Pleaseremovethemodemandreinsertit.



4. Q: WhatshouldIdoiftheSIM/USUMcardisunpluggedduringtheapplication?

 A: Pleasedisconnectthe modemfirst,andthenrestarttheapplication.



5. Q: TheSIM/USIMcarddoesnotregisteranynetworks

 A: Thereasonsareshownbelow:

1.Unstablelocalsignal;

2.Thesoftwareisanoldversion;

3.Hardwareproblem.

Youmay:

1.Trytologonfromanotherlocation;

2.Updatethesoftware;

3.Checkthehardwareoruseanotherdatacardandretry.



6. Q: Why does the prompt “No available connection profile. Please set an

availabledefaultoneinconnectionprofile”appear?

 A: Pleaseaddaconnectionprofilemanually.



7. Q: Itfailedtoconnecttotheinternet

 A: Pleasemakesuretheconnectionprofileandsettingsarecorrect.



8.Q:Theconnectionspeedanddatatransferratesaretooslow

 A: Pleasecheckthelocalnetworksignalstrength.



9. Q: SendinganSMSfailed

 15

 A: PleasemakesuretheSMScenternumberiscorrect.



10.Q: IcannotreceiveanSMS

 A: PleasecheckwhetheryourSIM/USIMcard’smemoryisfull.



11.Q: WhycanIonlysavepartofthenamewhenaddinganewcontact?

 A: TheSIM/USIMcardcanonlyhold12SBCcharacters,and6DBCcharacters.



12.Q: Doesitsupportroaming?

 A: Thisdependsonthelocaloperator. Pleasecheck with yourlocaloperatoror

serviceprovider.



12. Certification



www.sar‐tick.com

ThisproductmeetsapplicablenationalSARlimitsof2.0W/kg.

ThespecificmaximumSARvaluescanbefoundinthefollowingsectionofthisuser

guide.

Whencarryingtheproductorusingitwhilewornonyourbody,eitherusean

approvedaccessorysuchasaholsterorotherwise

maintainadistanceof5mm

fromthebodytoensurecompliancewithRFexposurerequirements.Notethatthe

productmaybetransmittingevenifyouarenotmakingaphonecall.

CE: Proof of compliance with international standards (ICNIRP) or with European

Directive1999/5/EC(R&TTE)isrequiredofallModemmodelsbeforetheycanbeput

on the market. The protection of the health and safety for the user and any other

personisanessentialrequirementofthesestandardsorthisdirective.



THISDEVICEMEETSINTERNATIONALGUIDELINESFOREXPOSURETORADIOWAVES.

TheUSB‐Modemisaradiotransmitterandreceiver.Itisdesignednottoexceedthe

limits for exposure to radio waves (radio frequency electromagnetic fields)

recommended by international guidelines. The guidelines were developed by an

independentscientific  organization (ICNIRP) and include a substantial safety margin

designedtoassurethesafetyofallpersons,regardlessofageandhealth.

Theradiowaveexposureguidelinesuseaunit ofmeasurementknownastheSpecific

AbsorptionRate,orSAR.TheSARlimitformobiledevicesis2W/kg.

Tests for SAR are conducted using standard operating positions with the device

transmitting at its highest certified power level in all tested frequency bands. The

highestSARvaluesundertheICNIRPguidelinesforthisdevicemodelare:

 16



MaximumSARforthismodelandconditionsunderwhich

itwasrecorded.

Body‐wornSAR

GSM900 0.330



During use, the actual SAR values for this device are usually well below the values

stated above. This is because, for purposes of system efficiency and to minimize

interference on the network, the operating power of your mobile device is

automatically decreased when full power is not needed for the call. The lower the

poweroutputofthedevice,theloweritsSARvalue.



Body‐worn SAR testing has been carried out at a separation distance of 5mm. To

meet RF exposure guidelines during body‐worn operation, the device should be

positioned at least this distance away from the body.If you are not using an

approved accessory ensure that whatever product is used is free of any metal and

thatitpositionsthephonetheindicateddistanceawa yfromthebody.



The World Health Organization has stated that present scientific information does

notindicatetheneedforanyspecialprecautionsfortheuseofmobiledevices.They

recommendthatifyouareinterestedinfurtherreducingyourexposurethenyoucan

easilydosobylimitingyourusageorkeepthedeviceawa yfromtheheadandbody.



Formoreinformationyoucangotowww.alcatelonetouch.com

Additional information about electromagnetic fields and public health are available

onthefollowingsite:http://www.who.int/peh‐emf



The USB‐Modem is equipped with a bui lt‐in antenna. For optimal operation, you

shouldavoidtouchingitordegradingit.



Alcatel is a trademark of Alcatel-Lucent used under license by TCT Mobile Limited.

TCT Mobile Limited reserves the right in the customer’s interest to alter material or technical

specifications without prior notice.

Alcatel OneTouch ONE TOUCH X715 User manual

Brand: Alcatel OneTouch

Model: ONE TOUCH X715

Category: Cellular wireless network equipment

Type: User manual

This manual is also suitable for

X715

Download PDF

report

Alcatel OneTouch ONE TOUCH X715 User manual

This manual is also suitable for

Alcatel OneTouch ONE TOUCH X715 User manual

Related papers

Other documents