Fujifilm J50 Owner's manual

OWNER’S MANUAL

This manual will show you how to use

your FUJIFILM DIGITAL CAMERA

FinePix F480 / FinePix F485 / FinePix J50

correctly.

Please follow the instructions carefully.

BL00641-204(1)

Getting Ready

Using the Camera

Advanced Features

• Photography

Settings

Camera Connection

Software

Installation

• Playback

•Movie

Appendices

Troubleshooting

2

Warning

To prevent fire or shock hazard, do not expose the unit to rain

or moisture.

For customers in the U.S.A.

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

CAUTION

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for

help.

You are cautioned that any changes or modifications not expressly

approved in this manual could void the user’s authority to operate

the equipment.

Notes on the Grant:

To comply with Part 15 of the FCC Rules, this product must be used

with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC

supply cord.

For customers in Canada

CAUTION

This Class B digital apparatus complies with Canadian ICES-003.

Please read the Safety Notes (separate note “Notes

and Cautions”) and make sure you understand them

before using the camera.

Perchlorate Material-special handling may apply,

See http://www.dtsc.ca.gov/hazardouswaste/

perchlorate.

3

IMPORTANT

Be sure to read this page before using the software.

NOTICE

BEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILM

Corporation, PLEASE READ THIS END USER LICENSE AGREEMENT

CAREFULLY. ONLY IF YOU AGREE WITH THIS AGREEMENT,

SHOULD YOU USE THE SOFTWARE RECORDED ON THE CD-ROM.

BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE

BOUND BY THIS AGREEMENT.

End User License Agreement

This End User License Agreement (“Agreement”) is an agreement between

FUJIFILM Corporation (“FUJIFILM”) and you, which sets forth the terms

and conditions of the license granted for you to use the software provided

by FUJIFILM.

The CD-ROM contains third party software. In case a separate agreement

is provided by a third party supplier for its software, the provisions of such

separate agreement shall apply to the use of such third party software,

prevailing over those of this Agreement.

1. Definitions.

(a) “Media” means the CD-ROM titled “Software for FinePix”- which is

provided to you together with this Agreement.

(b) “Software” means the software which is recorded on Media.

(c) “Documentation” means the operation manuals of Software and

other related written materials which are provided to you together

with Media.

(d) “Product” means Media (including Software) and Documentation

collectively.

2. Use of Software.

FUJIFILM grants to you a nontransferable, nonexclusive license:

(a) to install one copy of Software onto one computer in binary machine

executable form;

(b) to use Software on the computer onto which Software is installed; and

(c) to make one backup copy of Software.

3. Restrictions.

3.1 You shall not distribute, rent, lease or otherwise transfer all or any

part of Software, Media or Documentation to any third party without

FUJIFILM’s prior written consent. You also shall not sublicense,

assign or otherwise transfer all or any part of the rights granted to

you by FUJIFILM under this Agreement without FUJIFILM’s prior

written consent.

3.2 Except as expressly granted by FUJIFILM hereunder, you shall not

copy or reproduce all or any part of Software or Documentation.

3.3 You shall not modify, adapt or translate Software or Documentation.

You also shall not alter or remove copyright and other proprietary

notices that appear on or in Software or Documentation.

3.4 You shall not, or shall not have any third party, reverse-engineer,

decompile, or disassemble Software.

4. Ownership.

All copyrights and other proprietary rights to Software and Documentation are

owned and retained by FUJIFILM or the third party suppliers as indicated on

or in Software or Documentation. Nothing contained herein shall be

construed, expressly or implicitly, as transferring or granting any right, license,

or title to you other than those explicitly granted under this Agreement.

5. Limited Warranty.

FUJIFILM warrants to you that Media is free from any defect in material

and workmanship under normal use for ninety (90) days from the date

of your receipt of Media. Should Media not meet the foregoing warranty,

FUJIFILM shall replace such defective Media with other Media bearing

no defect. FUJIFILM’s entire liability and your sole and exclusive

remedy with regard to any defect in Media shall be expressly limited to

such FUJIFILM’s replacement of Media as provided herein

6. DISCLAIMER OF WARRANTY.

EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES

PRODUCT “AS IS” AND WITHOUT WARRANTIES OF ANY KIND,

EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY,

EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS,

INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY

COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER

PROPRIETARY RIGHTS OF ANY THIRD PARTY, MERCHANTABILITY,

OR FITNESS FOR ANY PARTICULAR PURPOSE.

7. LIMITATION OF LIABILITY.

IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY

GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,

INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FOR

LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE

USE OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

8. No export.

You acknowledge that neither Software nor any part thereof, will be

transferred, or exported to any country or used in any manner in violation

of any export control laws and regulations to which Software is subject.

9. Termination.

In case you breach any of the terms and conditions hereof, FUJIFILM

may immediately terminate this Agreement without any notice.

10. Term.

This Agreement is effective until the date when you cease to use

Software, unless earlier terminated in accordance with Section 9 hereof.

11. Obligation upon termination.

Upon termination or expiration of this Agreement, you shall, at your own

responsibility and expense, delete or destroy immediately all Software

(including its copies), Media and Documentation.

12. Governing Law.

This Agreement shall be governed by and construed in accordance with

laws of Japan.

4

EC Declaration of Conformity

We

Name: FUJIFILM Electronic Imaging Europe GmbH

Address: Benzstrasse 2

47533 Kleve, Germany

declare that the product

Product Name: FUJIFILM DIGITAL CAMERA FinePix F480 / FinePix F485 / FinePix J50

Manufacturer’s Name: FUJIFILM Corporation

Manufacturer’s Address: 7-3, AKASAKA 9-CHOME, MINATO-KU,

TOKYO 107-0052, JAPAN

conforms to the following Standards:

Safety: EN60065: 2002 + A1

EMC: EN55022: 1998 + A1: 2000 + A2: 2003 Class B

EN55024: 1998 + A1: 2001 + A2: 2003

EN61000-3-2: 2000 + A2: 2005

EN61000-3-3: 1995 + A1: 2001 + A2: 2003

following the provision of the EMC Directive (2004/108/EC) and Low Voltage Directive (2006/95/EC).

Kleve, Germany

Place

February 1, 2008

This product comes with batteries. When these are empty, you shouldn’t throw them

away but deliver them as domestic chemical refuse.

Signature/Managing DirectorDate

5

Disposal of Electric and Electronic Equipment in Private Households

Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries with

separate collection systems)

This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this

product shall not be treated as household waste.

Instead it should be taken to an applicable collection point for the recycling of electrical and electronic

equipment.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to

the environment and human health, which could otherwise be caused by inappropriate waste handling of this

product.

If your equipment contains easy removable batteries or accumulators please dispose these separately according to your local

requirements.

The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,

please contact your local city office, your household waste disposal service or the shop where you have purchased the product.

In Countries outside the EU:

If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.

6

Contents

Warning................................................................. 2

IMPORTANT ......................................................... 3

EC Declaration of Conformity................................ 4

Disposal of Electric and Electronic Equipment in

Private Households ......................................... 5

Contents................................................................ 6

About this Manual ................................................. 8

Accessories Included ............................................ 9

Camera Parts and Features................................ 10

Example of LCD Monitor Text Display ................ 11

Getting Ready

Charging the Battery ........................................... 12

Loading the Battery ............................................. 14

Loading the Memory Card................................... 16

Turning On and Off ............................................. 19

Setting the language, date, and time .......... 20

Correcting the Date and Time ............................. 23

Selecting the Language ...................................... 24

Using the Camera

Taking Pictures (AUTO Mode) ............................ 25

Taking pictures with the focus and exposure

locked ....................................................... 29

Adjusting the shot composition ................... 31

Viewing the Images............................................. 32

Erasing the Images/Movies ............................ 36

Using the erase button ( /n) .................... 36

Erasing the images using

[PLAYBACK MENU]................................. 36

Advanced Features — Photography

Using the Photography Functions —

Procedure of Setting ..................................... 39

Setting the Shooting Mode ................................. 41

Shooting Mode ................................................... 43

e Macro (Close-up)........................................... 48

d Setting the Flash............................................. 49

* Self-Timer ...................................................... 51

j Increasing Monitor Brightness ...................... 53

Using [SHOOTING MENU] ................................ 54

Setting the [SHOOTING MENU] ................ 54

[SHOOTING MENU]........................................... 57

Changing the sensitivity setting

([ ISO]) ................................................. 57

Changing the quality setting

([ QUALITY]) ........................................ 57

Adjusting exposure compensation

([ EXP. COMPENSATION]) ................. 59

Adjusting color balance

([ WHITE BALANCE]) .......................... 60

Taking pictures continuously

([ CONTINUOUS])............................... 61

Advanced Features — Playback

Using [PLAYBACK MENU]................................. 62

Setting the [PLAYBACK MENU] ................ 62

[PLAYBACK MENU] .......................................... 63

Setting automatic playback

([ SLIDE SHOW])................................. 63

DPOF set frame

([ PRINT ORDER (DPOF)]) ................. 63

7

Protecting the images ([ PROTECT])...... 67

Copying the images ([ COPY])................ 68

Rotating the images

([ IMAGE ROTATE]) ............................. 71

Trimming the images ([ TRIMMING]) ...... 72

Advanced Features — Movie

r Recording Movies .......................................... 74

Set the camera to r Movie mode.............. 74

Record movies ............................................ 75

w Playing Back Movies ..................................... 76

Settings

[ SET-UP]........................................................ 78

Using the [SET-UP] menu........................... 78

[SET-UP] menu option ................................ 79

Camera Connection

Connecting to a TV ............................................. 87

Connecting Camera Directly to Printer —

PictBridge Function ....................................... 88

Software Installation

Installation on a Windows PC ............................. 92

Installation on a Mac OS X ................................. 94

Connecting to a PC ............................................. 97

Using FinePixViewer................................. 100

Appendices

System Expansion Option ................................ 102

Accessories Guide ........................................... 103

Using Your Camera Correctly .......................... 105

Notes on the xD-Picture Card™, the SD Memory

Card and the Internal Memory .................... 106

Warning Displays ............................................. 107

Troubleshooting

Troubleshooting................................................ 111

Specifications ................................................. 117

Explanation of Terms ..................................... 124

FUJIFILM Digital Camera Worldwide

Network..................................................... 125

Usable Memory Cards

You can use the xD-Picture Card, the SD Memory Card and

the SDHC Memory Card with the FinePix F480 / FinePix F485

/ FinePix J50. In this Owner’s Manual, these cards are

expressed as “Memory Card”.

8

About this Manual

Z About marks

CAUTION:

This mark denotes issues that may affect the camera’s operation.

CHECK: This mark denotes points to notice in the camera’s operation.

MEMO: This mark denotes additional topics that complement the basic operating procedures.

Z Usable Memory Cards

You can use the xD-Picture Card, the SD Memory Card and the SDHC Memory Card with the FinePix F480 / FinePix F485 /

FinePix J50. In this Owner’s Manual, these cards are expressed as “Memory Card”.

Z About illustration

Up, down, left, and right are indicated by black triangles in the Owner’s Manual. Up or down is shown as n or o, and left or

right is shown as p or q.

Z About cables

The cables used for FinePix F480 / FinePix F485 / FinePix J50 are following:

• A/V cable for FinePix F480 / FinePix F485 / FinePix J50

• USB cable for FinePix F480 / FinePix F485 / FinePix J50

In this manual, these cables are expressed as “A/V cable” and “USB cable”.

Z Note

In this manual, the menu names and messages displayed on the LCD monitor of the camera or PC screen appear in square

brackets ([ ]).

Z About each model’s functions

This Owner’s Manual shows the description of 3 models: FinePix F480, FinePix F485 and FinePix J50. Some functions are

available only on one model. The description of functions available only on certain models has an indication of the model name.

When pressing q:

When pressing DISP/BACK:

9

Accessories Included

Make sure that all the below accessories are included.

Note that accessories may vary depending on model.

• Rechargeable Battery NP-40N (1)

\

•Strap (1)

• Battery Charger (1 set)

FinePix F480 / FinePix F485: BC-40N

FinePix J50: BC-40N / BC-40ND

• A/V cable (1)

•USB cable (1)

• CD-ROM (1)

Software for FinePix

• Owner’s Manual (this manual) (1)

• Notes and Cautions (1)

Attaching the strap

Attach the strap as shown in 1 and 2.

When attaching the strap, move the fastener to adjust the

length and slightly away from the end of the strap, as

shown in figure 1.

NP-40N

BC-40N BC-40ND

10

Camera Parts and Features

• Refer to the pages in parentheses for information on using the camera parts or features.

A Shutter button

B FinePix F480 / FinePix F485:

POWER button

FinePix J50: ON/OFF button

C Self-timer lamp (p.52)

D Speaker

E Microphone

F Flash (p.49)

G Zoom switch (p.26, 33)

H Lens (Lens cover)

I n/j Low light view button (p.53)/

Erase button (p.36)

J Strap mount

K Mode dial

L q/d Flash button (p.49)

M w (Playback) button

N Battery cover

O Battery compartment

P Memory Card slot (p.16)

Q ; USB socket

A/V OUT (Audio/Visual output) socket

(p.87)

R Indicator lamp (p.28)

S LCD monitor

T MENU/OK button

U p/e Macro button (p.48)

V Tripod mount

W DISP (Display)/BACK button (p.31, 32)

X o/* Self-timer button (p.51)

11

Example of LCD Monitor Text Display

Z Shooting mode

Z Playback mode

FinePix F480 / FinePix F485 / FinePix J50 has internal memory that can store images without Memory Card. Y appears on the

LCD monitor when the internal memory is active.

A ( Self-timer (p.51)

B e Macro (close-up) (p.48)

C C Flash (p.49)

D s Shooting mode (p.41)

E Battery level indicator

(p.22)

F AF frame (p.26)

G Date/Time (p.20)

H 9 White balance (p.60)

I f Continuous shooting (p.61)

J iN Quality mode (p.57)

K Number of available frames

(p.122)

L ISO 100 Sensitivity (p.57)

M { AF warning (p.107)

N | Camera shake warning

(p.107)

O Increasing monitor

brightness (p.53)

P Y Internal memory (p.18)

Q S Exposure compensation

(p.59)

A

B

C

D

E

A w Playback mode (p.32)

B u DPOF (p.63)

C F Protection (p.67)

D Frame number (p.81)

E Present (p.32)

12

Charging the Battery

The battery is not fully charged at shipment and must be

fully charged before being used.

Z Compatible battery

Rechargeable Battery NP-40N (1)

CAUTION

• The battery is not fully charged at shipment and must be

fully charged before being used.

• Do not stick labels onto the battery as this could cause

the battery to become jammed inside the camera.

• Any contact between the battery terminals could cause

the battery to short circuit and overheat.

• See “Notes and Cautions” for information on the

battery.

• Always use the Rechargeable Battery NP-40N

(included) or NP-40 (sold separately). The use of other

brands of rechargeable battery could cause faults or

damage to the camera.

• Do not split or peel outer labels of the battery.

1 Load the battery into the battery charger.

Set the battery correctly as indicated by the polarity icon.

NP-40N

Terminals

Indicator

Rechargeable

Battery NP-40N

Battery Charger

BC-40N

Rechargeable

Battery NP-40N

Battery Charger

BC-40ND

12

13

Getting Ready

2 Plug the battery charger into a power outlet.

The charging indicator lights orange and charging begins.

When charging is completed, the indicator turns off.

Charging completes after about 2 hours.

Z <Charging Indicator and Statuses>

CAUTION

• Unplug the battery charger from the power outlet when

it is not in use.

• If the terminals of battery are soiled, it may not be

possible to charge it. Clean the battery terminals and

battery charger terminals with a clean, dry cloth.

• Charging times increase at low temperatures.

• The NP-40N gradually loses its charge even when not

used. Charge a NP-40N just before taking pictures (in

the last day or two).

To power outlet

To power outlet

Charging

Indicator

Status Action

Off

Battery not loaded Load the battery to be

charged.

Off

Fully charged

(charging complete)

Remove the battery

from the battery

charger.

Lit orange Charging –

Blinking

orange

Battery fault during

charging

Unplug the battery

charger and remove

the battery from the

battery charger.

14

Loading the Battery

1 Open the battery cover.

CHECK

Check that the camera is turned off before opening the

battery cover.

CAUTION

• Do not open the battery cover while the camera is on.

This could damage the Memory Card or ruin the image

files on the Memory Card.

• Do not apply force to the battery cover.

2 Load the battery.

Make sure that the indicators are aligned. Push the

battery release catch aside while loading the battery.

Check that the battery is firmly held in place.

CAUTION

Load the battery in the correct direction.

Battery is required to operate the digital camera. At first, load the battery in the camera.

Battery release catch

Indicator

15

Getting Ready

3 Close the battery cover.

To remove the battery

Open the battery cover, and unlock the battery release catch

with your finger.

CAUTION

Make sure the camera is turned off before removing the

battery.

Battery release catch

16

Loading the Memory Card

Although you can store pictures in the camera’s internal

memory, you can store many more images on the

Memory Card (sold separately). You can use the xD-

Picture Card and the SD Memory Card with the FinePix

F480 / FinePix F485 / FinePix J50. In this Owner’s

Manual, these cards are expressed as “Memory Card”.

SD Memory Cards/SDHC Memory Cards

They are operation-checked at FUJIFILM Corporation.

Maker: SanDisk

MEMO

• Compatible Memory Cards will be updated in our

website:

http://www.fujifilm.com/products/digital_cameras/index.html

• Depending on the SD Memory Card, recording of

movies may be interrupted.

Use of above mentioned SD Memory Cards are

recommended.

• The camera is not compatible with multimedia cards.

1 Open the battery cover.

2 Insert a Memory Card.

(xD-Picture Card)

(SD Memory Card)

17

Getting Ready

CAUTION

Be sure to unlock the protection of the SD Memory Card

before inserting it. If it is locked, recording/deleting

images, as well as formatting are not available. To unlock

the protection, slide the switch back, and the SD Memory

Card will work normally.

CAUTION

• A new SD Memory Card or a card previously used on a

PC or any device other than the camera should be

formatted (➝p.84) on the camera before use.

• Do not use a miniSD adaptor or a microSD adaptor

which have exposed contact areas on the back. Use of

these adaptors may cause a malfunction or damage

due to the improper contacts.

A miniSD adaptor or microSD adaptor bigger than SD

Memory Card standard size may become stuck. Pulling

out forcefully may cause a malfunction. In that case,

contact your FUJIFILM dealer.

3 Close the battery cover.

How to replace the Memory Card

Push the Memory Card into the slot and then slowly remove

your finger. The lock is released and the Memory Card is

pushed out.

Continued Q

Protection

switch

18

Loading the Memory Card

CAUTION

• When storing Memory Cards, make sure that they are

kept out of the reach of children. A Memory Card could

be swallowed and cause suffocation. If a child swallows

a Memory Card, seek medical attention or call

emergency number right away.

• If the Memory Card is oriented incorrectly, it will not go

all the way into the slot. Do not apply force when

inserting a Memory Card.

• Note that the Memory Card may spring out if you

release your finger quickly from the card immediately

after the lock is released.

• Operation of this camera is only guaranteed when it is

used with FUJIFILM xD-Picture Card and operation-

checked SD Memory Card (➝p.16).

• See p.106 for information on the xD-Picture Card, SD

Memory Card and the internal memory.

MEMO

• The size of an image file varies depending on the

subject. For this reason, the number recorded may not

represent the actual number of frames.

• See p.122 for information on the standard number of

available frames.

Z About internal memory

When a Memory Card (sold separately) is inserted

[Record images]: Record images to a Memory Card.

[Playback images]: Playback images in a Memory Card.

When a Memory Card (sold separately) is not inserted

[Record images]: Record images to internal memory.

[Playback images]: Playback images in internal memory.

Z About images in the internal memory

Images held in the camera’s internal memory may be

corrupted or erased due to problems such as camera

faults. Save your important data to another media (i.e.,

DVD-R, CD-R, CD-RW, hard disk, etc.).

It is possible to transfer saved images on the internal

memory to a Memory Card (➝p.68).

CAUTION

Erase the unnecessary images in the internal memory.

(➝p.36)

12

124NN

AUTO

FinePix F480 / FinePix F485

/ FinePix J50 has internal

memory that can store

images without Memory

Card. Y appears on the

LCD monitor when internal

memory is active.

19

Getting Ready

Turning On and Off

Turning the camera on in

Shooting mode

Press POWER (FinePix F480 / FinePix F485) / ON/OFF

(FinePix J50) down fully to turn the camera on.

Press POWER (FinePix F480 / FinePix F485) / ON/OFF

(FinePix J50) again to turn the camera off.

MEMO

Changes between Shooting mode and Playback

mode

Press w during shooting to change to Playback mode.

Press the shutter button down halfway to return to

Shooting mode.

CAUTION

• The lens moves and the lens cover opens when turning

the camera on in Shooting mode. Take care not to

obstruct the lens.

• Take care not to get fingerprints on the camera lens as

this will result in impaired image quality in your shots.

• The POWER (FinePix F480 / FinePix F485) / ON/OFF

(FinePix J50) button does not completely disconnect

the camera from its power supply.

Turning the camera on in

Playback mode

Press w for about 1 second to turn the camera on in

Playback mode.

Press w during playback to turn the camera off.

MEMO

To change to Shooting mode, press the shutter button

down halfway.

20

Turning On and Off

Setting the language, date, and

time

When using the camera for the first time after purchasing,

the language, date, and time are cleared. Set the

language, date, and time.

1 [ ] screen appears when turning

the camera on.

2 Set the date and time.

MEMO

• Holding down n or o changes the numbers

continuously.

• When the time displayed passes “12”, the AM/PM

setting changes.

APress n, o, p, or q to select the

language.

BPress MENU/OK to confirm the setting.

SET

NO

START MENU

/ LANG.

APress p or q to select Year, Month,

Day, Hour, or Minute.

BPress n or o to correct the setting.

SET

NO

DATE / TIME NOT SET

YY.MM.DD

1. 1 12:00

AM

2006

2007

2009

2008

2010

Page is loading ...

Fujifilm J50 Owner's manual

This manual is also suitable for

Fujifilm J50 Owner's manual

Related papers

Other documents