Aaeon ATX-Q370A User manual

Type
User manual
Industrial Motherboard
ATX-Q370A
ii
E15810
First Edition
August 2019
Copyright Notice
This document is copyrighted, 2019. All rights are reserved. The original
manufacturer reserves the right to make improvements to the products described
in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use,
or for any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to
change without notice. While reasonable efforts have been made in the preparation
of this document to assure its accuracy, the original manufacturer assumes no
liabilities resulting from errors or omissions in this document, or from the use of the
information contained herein.
The original manufacturer reserves the right to make changes in the product
design without notice to its users.
Acknowledgments
All other products’ name or trademarks are properties of their respective owners.
• AMI is a trademark of American Megatrends Inc.
• Intel
®
, Core™ are trademarks of Intel
®
Corporation.
• Microsoft Windows
®
is a registered trademark of Microsoft Corp.
• IBM, PC/AT, PS/2, and VGA are trademarks of International Business
Machines Corporation.
The original manufacturer reserves the right to make changes in the product
design without notice to its users.
All other product names or trademarks are properties of their respective owners.
iii
Contents
Chapter 1 Product overview
1.1 Package contents......................................................................... 1-1
1.2 Features ........................................................................................ 1-1
1.3 Specifications ............................................................................... 1-2
Chapter 2 Motherboard information
2.1 Before you proceed ..................................................................... 2-1
2.2 Motherboard layout ...................................................................... 2-2
2.3 Screw size ..................................................................................... 2-4
2.3.1 Component side .............................................................. 2-4
2.3.2 Solder side ...................................................................... 2-5
2.4 Central Processing Unit (CPU) ................................................... 2-6
2.4.1 Installing the CPU ........................................................... 2-7
2.4.2 CPU heatsink and fan assembly installation ................... 2-8
2.5 System memory ......................................................................... 2-10
2.5.1 Installing a DIMM .......................................................... 2-10
2.6 Jumpers ...................................................................................... 2-12
2.7 Connectors ................................................................................. 2-16
2.7.1 Rear panel connectors .................................................. 2-16
2.7.2 Internal connectors ....................................................... 2-18
Chapter 3 BIOS setup
3.1 BIOS setup program .................................................................... 3-1
3.1.1 BIOS menu screen .......................................................... 3-2
3.1.2 Menu bar ......................................................................... 3-2
3.2 Main menu .................................................................................... 3-2
3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-2
3.2.2 System Time [HH:MM:SS] .............................................. 3-2
3.3 Advanced menu ........................................................................... 3-3
3.3.1 CPUConguration .......................................................... 3-3
3.3.2 Trusted Computing ......................................................... 3-3
3.3.3 SATAConguration ........................................................ 3-4
3.3.4 USBConguration .......................................................... 3-5
3.3.5 Hardware Monitor ........................................................... 3-6
3.3.6 SIOConguration ......................................................... 3-12
iv
3.3.7 AMTConguration ........................................................ 3-14
3.3.8 PCH-FWConguration ................................................. 3-14
3.3.9 Power Management ...................................................... 3-14
3.3.10 DigitalIOPortConguration ......................................... 3-15
3.4 Chipset menu ............................................................................. 3-16
3.4.1 SystemAgent(SA)Conguration ................................. 3-16
3.4.2 PCH-IOConguration ................................................... 3-16
3.5 Security menu ............................................................................ 3-17
3.5.1 Administrator Password ................................................ 3-17
3.5.2 User Password .............................................................. 3-17
3.6 Boot menu .................................................................................. 3-18
3.6.1 BootConguration ........................................................ 3-18
3.6.2 FIXED BOOT ORDER Priorities .................................. 3-18
3.6.3 UEFI NETWORK Drive BBS Priorities .......................... 3-18
3.7 Save & Exit menu ....................................................................... 3-19
Appendix
Notices .......................................................................................................A-1
Contents
1-1
Chapter 1: General information
1.1 Package contents
Check your industrial motherboard package for the following items.
1 x Industrial Motherboard
1 x SATA Cable
1 x I/O Shield
1 x Support DVD
1 x COM port cable
If any of the above items is damaged or missing, contact your distributor or
sales representative immediately.
1.2 Features
• Intel
®
9
th
/ 8
th
Generation (Coffee Lake-S, Coffee Lake-S Refresh) Core™ i9/ i7/
i5/ i3, Pentium 14nm LGA 1151 socket Processor, Max 95W
• Four DDR4 (2666/2400/2133 MHz, max. 64GB) non-ECC, un-buffered
memory
• SATAIII 6.0 Gb/s port x 4 support RAID 0/1/5/10, M.2 2280 M-key (SATA3 +
PCIe x4) x 1
• PCI-Express 3.0 slot [x16] x 1, PCI-Express 3.0 slot [x4] x 2 (open edge), PCI-
Express 3.0 slot [x1] x 2 (open edge), PCI x 2, M.2 2280 M-key for PCIe x 4/
SATA3, M.2 2230 E-key for PCIe x1/ USB 2.0/ CNVi
• VGA, HDMI and DisplayPort support, 1 x USB3.1 Gen2-10Gbps Type-C
connector (Alternate Mode: USB+DP) (optional, default: N/A)
Chapter 1
Product overview
ATX-Q370A
1-2
1.3 Specifications
SYSTEM
Form factor
ATX Form Factor, 12”x9.6” (305mm x 244mm)
CPU
Intel
®
8
th
/ 9
th
Generation (Coffee Lake-S, Coffee Lake-S Refresh)
Core™ i9/ i7/ i5/ i3, Pentium 14nm LGA 1151 socket Processor,
Max. 95W
Memory
4 x DIMM, DDR4 (2666/2400/2133 MHz, max. 64GB), non-ECC,
un-buffered memory
Dual-channel memory architecture
I/O Chipset
NCT6793D+ F81216HD
Ethernet
1 x Intel
®
PHY i219LM Giga LAN (supports Intel
®
AMT 12.0)
1 x Intel
®
i211AT Giga LAN, (BOM option: 2 x Intel® i211AT Giga
LAN)
2 x RJ45 ports (BOM option: 3 x RJ45)
BIOS
1 x 256Mbit Flash ROM, AMI BIOS
Wake on LAN
Yes (WOL/PXE)
Watchdog Timer
1~255 steps by software program
H/W Monitor
Temperature Monitor on CPU/Chassis
Voltage Monitor on Vcore/5V/3.3V/12V
Fan Monitor on CPU/Chassis
Smart Fan Control
CPU Fan x 1 / Chassis Fan x 2
Power State
S3, S4, S5
Expansion slot
1 x PCIe 3.0 [x16] Slot
2x PCIe 3.0 [x4] Slots (open edge)
2x PCIe 3.0 [x1] Slots (open edge)
2x PCI Slots
1 x M.2 2230 E-key (PCIe x1/USB2.0/CNVi)
1 x M.2 2280 M-key (PCIe x4/SATA3)
TPM
Nuvoton NPCT750AAAYX TPM2.0 onboard (optional, default: N/A)
Battery
Lithium battery
Power requirement
1 x 24-pin ATX connector
1 x 8-pin (2x4) ATX 12V Power connector
Board size
9.6” x 9.6” (244mm x 244mm)
Gross weight
1.76 lb (0.8 Kg)
Operating
temperature
32~140°F (0~60°C)
Storage temperature
-40°F ~185°F (-40°C ~85°C)
Operating humidity
0%~90% relative humidity, non-condensing
Power compliance
N/A
Certificate
CE/FCC
(continued on the next page)
1-3
Chapter 1: General information
DISPLAY
Chipset
Intel
®
Graphics Media Accelerator
DisplayPort
Up to 4096 x 2160 @ 24 Hz / 3840 x 2160 @ 60 Hz, with Digital
Audio
HDMI
Up to 4096 x 2160 @ 30 Hz
VGA
Up to 1920 x 1200 @60Hz (via IT6516B)
I/O
Storage
4 x SATA III (6.0Gb/s) ports support RAID 0/1/5/10
1 x M.2 2280 M-key (PCIe x 4/SATA3)
Serial port
5 x RS-232 headers
1 x RS-232/422/485 (COM1, supports 5V/12V/RI optional)
USB
4 x USB 3.1 Gen 2 ports (10 Gbps)
2 x USB 3.1 Gen 1 ports (5 Gbps)
4 x USB 2.0 headers
Fan
1 x CPU Fan connector (4-pin)
2 x Chassis Fan connector(s) (4-pin)
DIO
1 x 8-bit Digital I/O interface (In/Out programmable)
Audio
3 x Audio Jack: Line-in, Mic-in, and Line-out on rear I/O
Ethernet
2 x RJ-45 ports on rear I/O
Display
1 x VGA port on rear I/O
1 x HDMI port on rear I/O
1 x DisplayPort port on rear I/O
1 x USB3.1 Gen2-10Gbps Type-C connector (Alternate Mode: USB+DP)
(optional, default: N/A)
Others
1 x Chassis Intrusion
1 x AT/ATX mode select jumper
1 x Front panel header
1 x Clear CMOS jumper
1 x 3-pin ME lock header
Others
OS Support
Windows
®
10 64 bit
Linux Ubuntu 64 bit (18.04.2/Kernal4.8.0)
ATX-Q370A
1-4
2-1
Chapter 2: Motherboard information
Chapter 2
Motherboard information
2.1 Before you proceed
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
CAUTION!
• Unplugthepowercordfromthewallsocketbeforetouchingany
component.
• Beforehandlingcomponents,useagroundedwriststraportouchasafely
groundedobjectorametalobject,suchasthepowersupplycase,toavoid
damaging them due to static electricity.
• HoldcomponentsbytheedgestoavoidtouchingtheICsonthem.
• Wheneveryouuninstallanycomponent,placeitonagroundedantistatic
pad or in the bag that came with the component.
• Beforeyouinstallorremoveanycomponent,ensurethattheATXpower
supply is switched off or the power cord is detached from the power
supply.Failuretodosomaycauseseveredamagetothemotherboard,
peripherals,orcomponents.
ATX-Q370A
2-2
ATX-Q370A
PCIEX16_1
PCIEX1_1
PCIEX1_2
PCI1
PCI2
PCIEX4_1
PCIEX4_2
F_PANEL
CLRTC1
DIS_ME
ATX_AT
CHASSIS
USB1213
EATXPWR1
CPU_FAN1
CHA_FAN1
CHA_FAN2
BATTERY1
Super
I/O
ALC
887
Intel
I211AT
Intel
PHY I219LM
ASM
1442K
ASM
1083
LGA1151
Intel
®
Q370
DDR4 DIMM_A1* (64bit, 288-pin module)
DDR4 DIMM_A2 (64bit, 288-pin module)
DDR4 DIMM_B1* (64bit, 288-pin module)
DDR4 DIMM_B2 (64bit, 288-pin module)
SATA6G_3 SATA6G_4
SATA6G_1
SPI_1
SATA6G_2
BUZZER1
AUDIO1
LAN2_USB31_34
USB30_67
USB20_891011
LAN1_USB31_12
HDMI
_DP1
24.4cm(9.6in)
128Mb
BIOS
EATX_PWR2
VGA
30.5cm(12in)
COM3COM4
COM2
COM1
COM5COM6
DIO1
AMP_CON1
M2_TYPE_M1
M2_TYPE_E1
2280
2230
COM1_V1
J1 J4
J2 J1
LED_5VSB
LED_5V
3 1 421 5
6
2
8
9
10
7
13 12 11114151617
18
6
2.2 Motherboard layout
Place this side
towards the rear
of the chassis
NOTE: Place eight screws into the holes indicated by circles to secure the
motherboard to the chassis.
CAUTION!Donotovertightenthescrews!Doingsocandamagethe
motherboard.
2-3
Chapter 2: Motherboard information
Connectors/Jumpers/Slots
Page
1.
CPUandchassisfanconnectors(4-pinCPU_FAN1,4-pinCHA_FAN1~2) 2-19
2.
ATXpowerconnectors(24-pinEATX_PWR1,8-pinEATX_PWR2) 2-18
3.
Intel
®
LGA1151CPUsocket 2-6
4.
M.2M-Key/E-Keyslots 2-23
5.
DDR4DIMMslots 2-10
6.
Serialportconnectors(10-1pinCOM1~6) 2-22
7.
BIOSprogrammableconnector(8-pinSPI_1) 2-18
8.
SerialATA6.0Gb/sconnectors(7-pinSATA6G_1~4) 2-21
9.
AT/ATXmodejumper(3-pinATX_AT) 2-13
10.
Systempanelconnector(10-1pinF_PANEL) 2-20
11.
Chassisintrusionconnector(4-1pinCHASSIS) 2-14
12.
ClearRTCRAM(CLRTC1) 2-12
13.
Intel
®
MEJumper(3-pinDIS_ME)
2-15
14.
USB2.0connectors(10-1pinUSB1112) 2-21
15.
COM1RS422/RS485terminator(2-pinJ1~4) 2-13
16.
COM1Ring/+5V/+12Vselection(COM1_V1) 2-14
17.
DigitalI/Oconnector(10-pinDIO1) 2-23
18. Audioamplierconnector(4-pinAMP_CON1) 2-19
ATX-Q370A
2-4
2.3 Screw size
2.3.1 Component side
1
A
B
C
D
EF
G
H
I
J
K
L
M
N
O
P
B
A
D
C
H
G
F E
O
N
M
L
K
J
I
P
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
6
7
8
9
10
11
SHEET
304.80
243.84
161.01
201.65
260.05
280.37
27.05
19.64
48.13
69.22
90.30
148.96
0.00
179.94
189.59
199.24
208.89
240.28
45.45
0.00
150.12
304.80
0.00
35.52
232.96
11.84
14.68
18.74
10.49
56.97
5.25
35.52
64.04
86.32
107.52
128.72
150.12
7.06
77.04
147.07
228.07
235.98
211.06
218.97
223.39
237.53
200.15
189.48
182.50
173.61
129.29
164.08
137.29
116.35
111.27
82.42
43.18
23.18
7.78
77.22
41.28
10.12
181.33
221.97
242.29
301.24
300.97
301.24
299.97
297.31
299.59
296.80
301.24
298.80
238.36
210.97
197.61
83.03
194.56
5.97
126.81
299.97
8.75
29.34
59.72
89.82
111.02
210.95
153.26
252.19
132.22
126.87
MATERIAL(SPEC) QUANTITY/SET
ASUSTek COMPUTER INC.
SEE NOTE
1 PC.
FINISH SCALE
SEE NOTE
1/1
DESCRIPTION
SELECT V UNIT
ATX-Q370A_MB_ALL_MANUAL
DIM TOL A B C D EXTRA
M/M
~8 0.03 0.05 0.10 0.20
8~25
0.05 0.08 0.20 0.30
1 of 2
MODEL NO.
DRAWIN NO. TBD
25~80 0.08 0.12 0.30 0.40
PART NO. TBD
80~250 0.12 0.20 0.40 0.50
DESIGNED CHECKED APPROVED
Lucas_Liu
250~ 0.20 0.30 0.50 0.60
APPROVER
SIGNREMARKUPDATE DESCRIPTION
DATEREV. LTR
FIRST RELEASE
A
B
ATX-Q370A MB COMPONENT SIDE
2-5
Chapter 2: Motherboard information
2.3.2 Solder side
243.84
33.02
10.16
89.31
126.81
108.81
144.81
165.10
164.31
165.10
237.49 237.49
0.00
195.23
151.99
16.51 16.51
0.00
140.97
298.45
258.66
183.65
247.58
186.56
183.65
258.66
298.45
140.97
94.99
125.49
161.55
51.69
ATX-Q370A
2-6
2.4 Central Processing Unit (CPU)
ThemotherboardcomeswithasurfacemountLGA1151socketdesignedforthe
Intel
®
8
th
/ 9
th
Generation(CoffeeLake-S,CoffeeLake-SRefresh)Core™i9/i7/i5/
i3,Pentium14nmLGA1151socketProcessor.
ATX-Q370A
ATX-Q370A CPU socket LGA1151
IMPORTANT:UnplugallpowercablesbeforeinstallingtheCPU.
CAUTION!
• Uponpurchaseofthemotherboard,ensurethatthePnPcapison
thesocketandthesocketcontactsarenotbent.Contactyourretailer
immediatelyifthePnPcapismissing,orifyouseeanydamagetothe
PnP cap/socket contacts/motherboard components. The manufacturer will
shoulder the cost of repair only if the damage is shipment/transit-related.
• Keepthecapafterinstallingthemotherboard.Themanufacturerwill
processReturnMerchandiseAuthorization(RMA)requestsonlyifthe
motherboardcomeswiththecapontheLGA1151socket.
• Theproductwarrantydoesnotcoverdamagetothesocketcontacts
resultingfromincorrectCPUinstallation/removal,ormisplacement/loss/
incorrectremovalofthePnPcap.
2-7
Chapter 2: Motherboard information
2.4.1 Installing the CPU
1
A
B
2 3
CAUTION! EnsurethatyouinstallthecorrectCPUdesignedforLGA1151
only.DONOTinstallaCPUdesignedforLGA1155andLGA1156socketson
theLGA1151socket.
A
B
C
4
5
ATX-Q370A
2-8
2.4.2 CPU heatsink and fan assembly installation
CAUTION!ApplytheThermal
InterfaceMaterialtotheCPU
heatsinkandCPUbeforeyouinstall
the heatsink and fan if necessary.
To install the CPU heatsink and fan assembly
B
A
A
B
1
2
3 4
2-9
Chapter 2: Motherboard information
A
B
B
A
To uninstall the CPU heatsink and fan assembly
2
1
ATX-Q370A
2-10
2.5 System memory
ThismotherboardcomeswithfourDoubleDataRate4(DDR4)DualInlineMemoryModule
(DIMM)sockets.ADDR4moduleisnotcheddifferentlyfromaDDR,DDR2,orDDR3module.
DONOTinstallaDDR,DDR2,orDDR3memorymoduletotheDDR4slot.
AccordingtoIntel
®
CPUspec,DIMMvoltagebelow1.2Visrecommendedtoprotectthe
CPU.
ATX-Q370A
ATX-Q370A 288-pin DDR4 DIMM sockets
DIMM_A1*
DIMM_A2
DIMM_B1*
DIMM_B2
2.5.1 Installing a DIMM
1
2
2-11
Chapter 2: Motherboard information
3
To remove a DIMM
A
B
ATX-Q370A
2-12
2.6 Jumpers
1. Clear RTC RAM (CLRTC1)
ThisjumperallowsyoutocleartheRealTimeClock(RTC)RAMin
CMOS.YoucancleartheCMOSmemoryofdate,time,andsystemsetup
parametersbyerasingtheCMOSRTCRAMdata.Theonboardbutton
cellbatterypowerstheRAMdatainCMOS,whichincludesystemsetup
information such as system passwords.
To erase the RTC RAM:
1. TurnOFFthecomputerandunplugthepowercord.
2. Movethejumpercapfrompins1-2(default)topins2-3.Keepthecapon
pins2-3forabout5~10seconds,thenmovethecapbacktopins1-2.
3. PlugthepowercordandturnONthecomputer.
4. Holddownthe<Del>keyduringthebootprocessandenterBIOSsetup
to reenter data.
CAUTION!ExceptwhenclearingtheRTCRAM,neverremovethecapon
CLRTCjumperdefaultposition.Removingthecapwillcausesystemboot
failure!
NOTE:Ifthestepsabovedonothelp,removetheonboardbatteryandmove
thejumperagaintocleartheCMOSRTCRAMdata.AfterclearingtheCMOS,
reinstall the battery.
ATX-Q370A
ATX-Q370A Clear RTC RAM
21 2 3
Normal
(Default)
Clear RTC
CLRTC1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53

Aaeon ATX-Q370A User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI