Barco iCon H600 Owner's manual

Type
Owner's manual
Barco service bulletin
Serial Number: InfoT 605
Date: 10/05/2005
Product: iCon H600
Priority code*: B
A.
”Must” modification, Barco will provide t he necessary components to per form this mo difica tion
at no charge.
B.
Improves the reliability of the product.
C.
Improves the general working conditions of the product.
D.
For information only.
1. PCI RISECARD JUMPERSETTINGS
Overview
Description
Setting the jumpers
1.1 Description
Jumpers
On the PCI Risecard there are 2 jumper settings (one for each PCI slot). If these jumpers
are not in the correct position, the PCI slots may not work properly or may not work at all.
Projecto rs shipped from 0 5/2005 onwards should have the jumpers set
in the right position.
1.2 Setting the jumpe
rs
How to access th
eJumpers
1.Remove the HDD adapter from the HD (image 1-1)
2.Remove the 4 screw
s(image1-2)
3.Push the flat cable and the pow er cable through the hole (image 1-3)
4.Removethewirebu
ndle from cable protection lock
5.Remove the 6 screws fixing the metallic protection cover ( image 1-4)
6.Remove the second w
ire bundle from the lower cable protective lock (image 1-5)
7.The PCI Risecard is now visible (image 1-6, image 1-7)
Barco nv Presentations
Noordlaan 5,
8520 Kuurne
www.barco.com
Page 1 of 4
Barco service bulletin
Image 1-1
Image 1-2
Image 1-3
Flat cable an d power cable (arrows) and cable bundle
InfoT:
InfoT 605
Page 2 of 4
Barco service bulletin
Image 1-4
Image 1-5
Image 1-6
PCI Risercard location
Page 3 o
f4
InfoT: InfoT 605
Barco service bulletin
Image 1-7
How to set the jumpers ?
1.Place the jumpers on AD27 fro PCI1 and on AD26 for PCI2 (image 1-8)
Image 1 -8
InfoT:
InfoT 605
Page 4 of 4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Barco iCon H600 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents