dji Snail User guide

Type
User guide

This manual is also suitable for

The dji Snail Quick-Release Propeller Adapter is designed to secure Snail Quick-Release Propellers, including 5048S Tri-Blade, 5024S, 6030S and 7027S on the Snail 2305 Racing Motor. It is easy to install and use, requiring only an M2 hex key. The adapter ensures a secure fit between the propeller and the motor, making it ideal for racing and other high-performance applications.

The dji Snail Quick-Release Propeller Adapter is designed to secure Snail Quick-Release Propellers, including 5048S Tri-Blade, 5024S, 6030S and 7027S on the Snail 2305 Racing Motor. It is easy to install and use, requiring only an M2 hex key. The adapter ensures a secure fit between the propeller and the motor, making it ideal for racing and other high-performance applications.

2
EN
Disclaimer and Warning
Thank you for purchasing the DJI™ Snail series product
(hereinafter referred to as “product”).Read this
disclaimer carefully before using this product. By
using this product, you hereby agree to this disclaimer
and signify that you have read it fully. Please install
and use this product in strict accordance with the
User Guide. SZ DJI TECHNOLOGY CO., LTD. and its
afliated companies assume no liability for damage(s)
or injuries incurred directly or indirectly from using,
installing or retting this product improperly, including
but not limited to using non-designated accessories.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD.
(abbreviated as “DJI”) and its afliated companies.
Names of products, brands, etc., appearing in this
document are trademarks or registered trademarks
of their respective owner companies. This product
and document are copyrighted by DJI with all rights
reserved. No part of this product or document shall be
reproduced in any form without the prior written consent
or authorization of DJI.
3
EN
This disclaimer is produced in various languages.
In the event of divergence among different versions,
the Chinese version shall prevail when the product
in question is purchased in China, and the English
version shall prevail when the product in question is
purchased in any other region.
Introduction
The Snail Quick-Release Propeller Adapter is
designed to secure Snail Quick-Release Propellers,
including 5048S Tri-Blade, 5024S, 6030S and 7027S
on the Snail 2305 Racing Motor.
In the Box
Adapter×1
(CCW)
Adapter×1
(CW)
Screws
(M2×4)
Spring×3
4
EN
Assembling the Adapters
Tools Required: M2 hex key
1. Mount the spring on the axes of the motor rst.
2. Align the holes on the adapter with white dots with
the holes on the CCW motors, and ensure that the
two protrusions on the bottom of the adapter are
able to insert into the two holes on the motor.Insert
the M2×4 screws and tighten to secure. Repeat to
mount the adapter without white dots on the CW
motors.
EN
Be sure to mount springs prior to mounting the
adapter, or it may impossible to secure the
adapter, affecting the assembly of the propellers.
Ensure that all the three screws are firmly
secured.
Keep an eye on screws during installation and
removal.
Specications
Weight (Single One): 0.65g
Thiscontentissubjecttochange.
Download the latest version from
http://www.dji.com/snail
DJIisatrademarkofDJI.
Copyright©2016DJIAllRightsReserved.
如果您对说明书有任何疑问或建议,请通过以
下电子邮箱联系我们:
Printed in China.
If you have any questions about this document,
please contact DJI by sending a message to
.
中国印制
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

dji Snail User guide

Type
User guide
This manual is also suitable for

The dji Snail Quick-Release Propeller Adapter is designed to secure Snail Quick-Release Propellers, including 5048S Tri-Blade, 5024S, 6030S and 7027S on the Snail 2305 Racing Motor. It is easy to install and use, requiring only an M2 hex key. The adapter ensures a secure fit between the propeller and the motor, making it ideal for racing and other high-performance applications.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI