There are three mounting positions for GPS modules and one cabling slot reserved on the
MATRICE
TM
600 aircraft. Mount the GPS-Compass Pro module to mounting position 1 to
leverage the GPS cabling slot.
The figure below shows all three mounting positions. Align the arrow marks on the GPS-
Compass Pro module with the aircraft’s nose direction during installation. Be sure to set
the corresponding GPS mounting position values in the DJI Assistant 2 after installation is
completed.
Mounting Guide for GPS Module
MATRICE 600
MATRICE
TM
is a trademark of DJI.
Copyright
©
2016 DJI All Rights Reserved.
GPS Mounting
Position 2
X 102
Y 59
Z -230
GPS Mounting
Position 3
X -102
Y 59
Z -230
GPS Mounting
Position 1
X 0
Y -130
Z -230
Aircraft Nose