Go

dji Go, Matrice 600 User guide

  • Hello! I am an AI chatbot trained to assist you with the dji Go User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
There are three mounting positions for GPS modules and one cabling slot reserved on the
MATRICE
TM
600 aircraft. Mount the GPS-Compass Pro module to mounting position 1 to
leverage the GPS cabling slot.
The figure below shows all three mounting positions. Align the arrow marks on the GPS-
Compass Pro module with the aircraft’s nose direction during installation. Be sure to set
the corresponding GPS mounting position values in the DJI Assistant 2 after installation is
completed.
Mounting Guide for GPS Module
MATRICE 600
MATRICE
TM
is a trademark of DJI.
Copyright
©
2016 DJI All Rights Reserved.
GPS Mounting
Position 2
X 102
Y 59
Z -230
GPS Mounting
Position 3
X -102
Y 59
Z -230
GPS Mounting
Position 1
X 0
Y -130
Z -230
Aircraft Nose
/