2. Triton Systems
  3. 9700 series

Triton Systems 9700 series, 9600 Series, RL5000 Xscale Series, RL5000X2 Series Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Triton Systems 9700 series Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
TDN 07102-00008
NMD-50 SLIDE RAIL STOP INSTALLATION (MODELS 9750/RL5000/9650)
(Reference Technical Bulletin #05-28)
The following illustrations show the installation of the slide catch bracket to the dispenser slide rail. Tool required is a #2
flat-tip screwdriver. Installation time approximately less than 5 minutes. See table below to determine which type and
placement for the catch bracket.
Step 1
Fully extend mechanism. Remove screw shown from
Right or Left side rail (see table). Retain screw.
Step 2
Slide catch bracket through slot on front of rail (L-shaped
or angle end pointing out).
Step 3
Secure bracket with screw previously removed.
Step 4
Slide mechanism back in cabinet.
)tnemecalP/ledoM(tiKpotSedilS05-DMN
tenibaC/ledoM #tiK tnemecalP
)sruoHssenisuB(057922100-00260edisthgiR
)1leveL(077932100-00260edistfeL
5115LR
)eldnaH-T/sruoHsseni
suB(
22100-00260edisthgiR
5115LR
)eldnaH-tfiL/sruoHssenisuB(
32100-00260edisthgiR
)1leveL(5215LR32100-00260edi
stfeL
)sruoHssenisuB(056922100-00260edisthgiR
)1leveL(076932100-00260edistfeL
06200-00122
(L-bracket)
06200-00123
(Acute-angle
bracket)
Kits
L-Bracket
Angle Bracket
/