Dometic CoolFreeze CF80, CF110 Operating instructions

CF80, CF110

Compressor Cooler

Operating manual . . . . . . . . . . . . . . . . . . . . . 6

Glacière à compression

Notice d’utilisation . . . . . . . . . . . . . . . . . . .25

Nevera por compresor

Instrucciones de uso . . . . . . . . . . . . . . . . . .45

Geleira com compressor

Manual de instruções . . . . . . . . . . . . . . . . .65

EN

FR

ES

PT

PORTABLE REFRIGERATION

CF SERIES

CF80_CF110-O-US.book Seite 1 Mittwoch, 30. August 2017 2:57 14

CF80_CF110-O-US.book Seite 2 Mittwoch, 30. August 2017 2:57 14

CoolFreeze

3

°

1

4

2

3

1

ON

OFF

SET

UP

+

DOWN

–

POWER

ERROR

1 2 3 4 5 6 7

2

FUSE

100-240V~AC

12/24V DC

1 2 3

3

CF80_CF110-O-US.book Seite 3 Mittwoch, 30. August 2017 2:57 14

CoolFreeze

4

1

2

1

4

ON

OFF

TURBO

POWER

ERROR

°

C

TEMP

+

TEMP

–

2

1

5

CF80_CF110-O-US.book Seite 4 Mittwoch, 30. August 2017 2:57 14

CoolFreeze

5

1 2 3

4

5

6

1 2

7

CF80_CF110-O-US.book Seite 5 Mittwoch, 30. August 2017 2:57 14

EN

CoolFreeze

6

Please read this operating manual carefully before starting the device.

Keep it in a safe place for future reference. If the device is passed on to

another person, this operating manual must be handed over to the user

along with it.

The manufacturer cannot be held liable for damage resulting from improper usage

or incorrect operation.

Contents

1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

2.1 General safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

2.2 Operating the cooling device safely . . . . . . . . . . . . . . . . . . . . . . . . . .9

3 Scope of delivery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

4 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

5 Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

6 Function description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6.1 Operating and display elements . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

6.2 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

7Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

7.1 Before initial use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

7.2 Energy saving tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

7.3 Connecting the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

7.4 Using the battery monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

7.5 Using the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

7.6 Setting the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

7.7 Switching off the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

7.8 Defrosting the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

7.9 Replacing the AC fuse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

7.10 Replacing the DC plug fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

7.11 Replacing the light bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

8 Cleaning and maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

9Guarantee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

CF80_CF110-O-US.book Seite 6 Mittwoch, 30. August 2017 2:57 14

EN

CoolFreeze Explanation of symbols

7

10 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

11 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

12 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

1 Explanation of symbols

D

!

A

I

DANGER!

Safety instruction: Failure to observe this instruction will cause fatal or

serious injury.

WARNING!

Safety instruction: Failure to observe this instruction can cause fatal or

serious injury.

CAUTION!

Safety instruction: Failure to observe this instruction can lead to injury.

NOTICE!

Failure to observe this instruction can cause material damage and impair

the function of the product.

NOTE

Supplementary information for operating the product.

CF80_CF110-O-US.book Seite 7 Mittwoch, 30. August 2017 2:57 14

EN

Safety instructions CoolFreeze

8

2 Safety instructions

2.1 General safety

!

WARNING!

•

Do not operate the cooling device if it is visibly damaged.

•

If this cooling device's power cable is damaged, it must be replaced

by the manufacturer, customer service or a similarly qualified person in

order to prevent safety hazards.

•

This cooling device may only be repaired by qualified personnel.

Improper repairs can lead to considerable hazards.

•

This cooling device can be used by children aged 8 years or over, as

well as by persons with diminished physical, sensory or mental capac-

ities or a lack of experience and/or knowledge, providing they are

supervised or have been taught how to use the cooling device safely

and are aware of the resulting risks.

•

Cleaning and user maintenance must not be carried out by children

without supervision.

•

Children must not play with the cooling device.

•

Children must be supervised to ensure that they do not play with the

cooling device.

•

Always keep and use the cooling device out of the reach of children

under the age of 8 years.

•

Do not store any explosive substances such as spray cans with a

flammable propellant in the cooling device.

!

CAUTION!

•

Disconnect the cooling device from the power supply

– before each cleaning and maintenance

– after every use

•

Food may only be stored in its original packaging or in suitable

containers.

A

NOTICE!

•

Check that the voltage specification on the type plate corresponds to

that of the energy supply.

•

Only connect the cooling device as follows:

– With the DC connection cable to a DC power supply in the vehicle

– Or with the AC connection cable to the AC power supply

CF80_CF110-O-US.book Seite 8 Mittwoch, 30. August 2017 2:57 14

EN

CoolFreeze Safety instructions

9

•

Never pull the plug out of the socket by the cable.

•

If the cooling device is connected to the DC outlet: Disconnect the

cooling device and other power consuming devices from the battery

before connecting a quick charging device.

•

If the cooling device is connected to the DC outlet: Disconnect the

cooling device or switch it off when you turn off the engine. Otherwise

you may discharge the battery.

•

The cooling device is not suitable for transporting caustic materials or

materials containing solvents.

•

The insulation of the cooling device contains flammable cyclopentane

and requires special disposal procedures. Deliver the cooling device

at the end of its life-cycle to an appropriate recycling.

2.2 Operating the cooling device safely

!

CAUTION!

•

Before starting the cooling device, ensure that the power supply line

and the plug are dry.

A

NOTICE!

•

Do not use electrical devices inside the cooling device unless they are

recommended by the manufacturer for the purpose.

•

Do not place the cooling device near naked flames or other heat

sources (heaters, direct sunlight, gas ovens etc.).

•

Danger of overheating!

Ensure at all times that there is sufficient ventilation so that the heat that

arises during operation does not build up. Make sure that the cooling

device is sufficiently far away from walls and other objects so that the

air can circulate.

•

Ensure that the ventilation openings are not covered.

•

Do not fill the inner container with ice or fluid.

•

Never immerse the cooling device in water.

•

Protect the cooling device and the cable against heat and moisture.

CF80_CF110-O-US.book Seite 9 Mittwoch, 30. August 2017 2:57 14

EN

Scope of delivery CoolFreeze

10

3Scope of delivery

fig. 1, page 3 shows the scope of delivery.

4Accessories

Available as accessories (not included in the scope of delivery):

If you have questions regarding the accessories, contact your local service partner.

5 Intended use

The cooler is suitable for cooling and freezing foods.

The cooler is designed to be operated from:

•

a DC on-board power supply of a vehicle, boat or caravan

•

a DC auxiliary battery

•

an AC power supply

Item Quantity Description

1 1 Cooler

2 1 Connection cable for DC connection

3 1 Connection cable for ACconnection

4 2 Carrying handle, consisting of:

–2 holders

–1 handle

– 4 fastening screws

– 1 Operating manual

Description Ref. no.

Insulated cover bag for CF80 9600003797

Insulated cover bag for CF100 9600003798

CF80_CF110-O-US.book Seite 10 Mittwoch, 30. August 2017 2:57 14

EN

CoolFreeze Function description

11

The cooling device is intended to be used in household and similar applications such

as

•

staff kitchen areas in shops, offices and other working environments

•

farm houses

•

clients in hotels, motels and other residential type environments

•

bed and breakfast type environments

•

catering and similar non-retail applications

!

6 Function description

The cooler can refrigerate or freeze food products. A fast-acting and efficient

cooling system provides maintenance-free cooling performance with a compressor

and control module.

The cooler is designed for mobile use and can be carried by two detachable

handles.

The cooler can withstand a short-term inclination of 30°, for example on boats.

Scope of functions:

•

Power pack with priority circuit for connecting to the AC power supply

•

3-level battery monitor for protecting the vehicle battery

•

Programmed turbo mode for rapid cooling

•

Display with temperature gauge

(switches off automatically at low battery voltage)

•

Temperature adjustment

(with two buttons in steps of 1 °C or 2 °F)

•

Detachable carrying handles

CAUTION! Health hazard!

Please check if the cooling capacity of the device is suitable for storing

the food or medicine you wish to cool.

CF80_CF110-O-US.book Seite 11 Mittwoch, 30. August 2017 2:57 14

EN

Function description CoolFreeze

12

6.1 Operating and display elements

Operating panel (fig. 2, page 3)

6.2 Connections

Connection sockets (fig. 3, page 3):

Item Description Explanation

1ON

OFF

Switches the cooler on or off when the button is pressed for

between one and two seconds

2 POWER Status indication

LED lights up green: Compressor is on

LED lights up orange: Compressor is off

LED flashes orange: display switched off automati-

cally due to low battery voltage

3 ERROR LED flashes red: Device is switched on but not

ready for operation

4 SET Selects the input mode

– Temperature setting

– Celsius or Fahrenheit display

– Set battery monitor

5 – Display, shows the information

6 UP + Press once to increase the value

7 DOWN – Press once to decrease the value

Item Description

1 AC power supply inlet

2Fuse holder

3 DC power supply inlet

CF80_CF110-O-US.book Seite 12 Mittwoch, 30. August 2017 2:57 14

EN

CoolFreeze Operation

13

7Operation

7.1 Before initial use

I

The handles are enclosed unassembled. If you wish to attach the handles, proceed

as follows:

➤ Make a handle by putting two holders (fig. 4 1, page 4) and a handle (fig. 4 2,

page 4) together.

➤ Fasten the grip with the enclosed screws in the holes provided.

Selecting the temperature units

You can switch the temperature display between Celsius and Fahrenheit. This is how

to do it:

➤ Switch on the cooler.

➤ Press the “SET” button (fig. 2 4, page 3) twice.

➤ Use the “UP +” (fig. 2 6, page 3) and “DOWN -” (fig. 2 7, page 3) buttons to

select Celsius or Fahrenheit.

✓ The selected temperature units then appear in the display for a few seconds. The

display flashes several times before it returns to the current temperature.

Reversing the lid opening direction

The lid hinges can be moved to the opposite side if you want to open the lid from the

opposite direction. To do this, proceed as follows:

➤ Open the latches.

➤ Remove the screws from the latches and take off the latches (fig. 5 1, page 4).

➤ Remove the screws from the hinges and take off the lid (fig. 5 2, page 4).

➤ Re-fit the hinges in the new positions.

➤ Re-fit the latches in the new positions.

NOTE

Before starting your new cooler for the first time, you should clean it

inside and outside with a damp cloth for hygienic reasons (please also

refer to the chapter “Cleaning and maintenance” on page 21).

CF80_CF110-O-US.book Seite 13 Mittwoch, 30. August 2017 2:57 14

EN

Operation CoolFreeze

14

7.2 Energy saving tips

•

Choose a well ventilated installation location which is protected against direct

sunlight.

•

Allow warm food to cool down first before placing it in the cooling device to

keep cool.

•

Do not open the cooling device more often than necessary.

•

Do not leave the cooling device open for longer than necessary.

•

Defrost the cooling device once a layer of ice forms.

•

Avoid unnecessary low temperatures.

7.3 Connecting the cooler

AC extension cord

!

➤ Select a UL/CSA listed 120 Vw/≥ 10 A outdoor use extension cord according to

the following table:

WARNING!

Because of potential safety hazards under certain conditions, the

manufacturer strongly recommends against the use of an extension

cord. However, if you must use an extension cord, it is absolutely

necessary that it be a UL-Listed (in the United States) or a CSA-Listed

(in Canada) appliance extension cord, with 10 A (minimum), 120 V

electrical ratings.

CAUTION!

•

Under no circumstances should you attempt to splice extension

cord wires.

•

Do not use power strips or 2-way splitters.

•

Always unroll or uncoil an extension cord to avoid heat retention and

possible melting.

Maximum cord length

120 Vw

10 ft. (3 m) 25 ft. (7.6 m) 50 ft. (15.2 m) 100 ft.

(30.5 m)

Wire conductors

3333

AWG

14 (1.6 mm²) 12 (2 mm²) 12 (2 mm²) 12 (2 mm²)

CF80_CF110-O-US.book Seite 14 Mittwoch, 30. August 2017 2:57 14

EN

CoolFreeze Operation

15

DC extension cord

!

➤ Select a 12 V/24 Vg/≥ 10 A automotive use extension cord according to the

following table:

Connecting to a battery (vehicle or boat)

The cooler can be operated with 12 V

g or 24 Vg.

A

For safety reasons the cooler is equipped with an electronic system to prevent

polarity reversal. This protects the cooler against short-circuiting when connecting to

a battery.

CAUTION!

•

The manufacturer does not recommend using any type of DC

extension cord.

•

Under no circumstances should you attempt to splice extension

cord wires.

•

Do not use power strips or 2-way splitters.

•

Always unroll or uncoil an extension cord to avoid heat retention and

possible melting.

Maximum cord length

12 Vg

3 ft. (0.9 m) 6 ft. (1.8 m) 10 ft. (3 m) 12 ft. (3.7 m)

24 Vg

6 ft. (1.8 m) 10 ft. (3 m) 15 ft. (4.6 m) 25 ft. (7.6 m)

AWG

14 (1.6 mm²) 12 (2 mm²) 10 (2.6 mm²) 8 (3.3 mm²)

NOTICE! Danger of damage!

Disconnect the cooler and other consumer units from the battery before

you connect the battery to a quick charging device.

Overvoltage can damage the electronics of the device.

CF80_CF110-O-US.book Seite 15 Mittwoch, 30. August 2017 2:57 14

EN

Operation CoolFreeze

16

Using the fused DC plug

A

➤ Plug the DC connection cable (fig. 1 2, page 3) into the DC power supply inlet

of the cooler (fig. 3 3, page 3).

➤ Connect the connection cable to the DC power outlet.

Connecting to an AC power supply (e.g. in the home or office)

D

The coolers have an integrated multi-voltage power supply with priority circuit for

connecting to an AC voltage source. The priority circuit automatically switches the

cooler to power supply operation, if the device is connected to an AC power supply,

even if the DC connection cable is still attached.

When switching between the AC power supply and the battery supply, the red LED

may light up briefly.

➤ Plug the AC connection cable (fig. 1 3, page 3) into the AC power supply inlet

of the cooler (fig. 3 1,page 3).

➤ Connect the connection cable to the AC power outlet.

NOTICE! Danger of damage!

For protection of the device the DC cable supplied includes a fuse inside

the plug. Do not remove the fused DC plug.

Only use the DC cable supplied.

DANGER! Danger of electrocution!

•

Never handle plugs and switches with wet hands or if you are

standing on a wet surface.

•

If you are operating your cooler on board a boat from a power supply

connection of 120 V

w, you must install a residual current circuit

breaker between the 120 V AC power supply and the cooler.

Seek advice from a trained technician.

CF80_CF110-O-US.book Seite 16 Mittwoch, 30. August 2017 2:57 14

EN

CoolFreeze Operation

17

7.4 Using the battery monitor

The device is equipped with a multi-level battery monitor that protects your vehicle

battery against excessive discharging when the device is connected to the on-board

DC supply.

If the cooler is operated when the vehicle ignition is switched off, the cooler switches

off automatically as soon as the supply voltage falls below a set level. The cooler will

switch back on once the battery has been recharged to the restart voltage level.

A

In “HIGH” mode, the battery monitor responds faster than at the levels “LOW” and

“MED” (see the following table).

This is how to select the battery monitor mode:

➤ Switch on the cooler.

➤ Press the “SET” button (fig. 2 4, page 3) three times.

➤ Use the “UP +” (fig. 2 6, page 3) and “DOWN -” (fig. 2 7, page 3) buttons to

select the battery monitor mode.

✓ The selected mode then appears in the display for a few seconds. The display

flashes several times before it returns to the current temperature.

I

NOTICE! Danger of damage!

When switched off by the battery monitor, the battery will no longer be

fully charged. Avoid starting repeatedly or operating without longer

charging phases. Ensure that the battery is recharged.

Battery monitor mode LOW MED HIGH

Switch-off voltage at 12 V

10.1 V 11.4 V 11.8 V

Restart voltage at 12 V

11.1 V 12.2 V 12.6 V

Switch-off voltage at 24 V

21.5 V 24.1 V 24.6 V

Restart voltage at 24 V

23.0 V 25.3 V 26.2 V

NOTE

When the cooler is supplied by the starter battery, select the battery

monitor mode “HIGH”. If the cooler is connected to a supply battery,

the battery monitor mode “LOW” will suffice.

If you wish to operate the cooler from the AC power supply, set the bat-

tery monitor to the “LOW” position.

CF80_CF110-O-US.book Seite 17 Mittwoch, 30. August 2017 2:57 14

EN

Operation CoolFreeze

18

7.5 Using the cooler

A

➤ Place the cooler on a firm foundation.

Make sure that the ventilation slots are not covered and that the heated air can

dissipate.

➤ Close the cooler, see chapter “Connecting the cooler” on page 14.

I

A

➤ Press the “ON/OFF” button (fig. 2 1, page 3) for between one and two

seconds.

✓ The “POWER” LED lights up.

✓ The display (fig. 2 5, page 3) switches on and shows the current cooling

temperature.

I

✓ The cooler starts cooling the interior.

I

NOTICE! Danger of overheating!

Ensure at all times that there is sufficient ventilation so that the heat that

generated during operation can dissipate. Ensure that the ventilation

slots are not covered. Make sure that the device is sufficiently far away

from walls and other objects so that the air can circulate.

NOTE

If you wish to operate the cooler from the AC power supply, set the

battery monitor to the “LOW” position.

NOTICE! Danger from excessively low temperature!

Ensure that the only those objects are placed in the cooler that are

intended to be cooled at the selected temperature.

NOTE

The temperature displayed is that of the middle of the interior.

The temperatures elsewhere can deviate from this temperature.

NOTE

When operating with the battery, the display switches off automatically

if the battery voltage is low. The LED “POWER” flashes orange.

CF80_CF110-O-US.book Seite 18 Mittwoch, 30. August 2017 2:57 14

EN

CoolFreeze Operation

19

7.6 Setting the temperature

➤ Press the “SET” button (fig. 2 4, page 3) once.

➤ Use the “UP +” (fig. 2 6, page 3) and “DOWN -” (fig. 2 7, page 3) buttons to

select the cooling temperature.

✓ The cooling temperature appears in the display for a few seconds. The display

flashes several times and then the current tempera-ture is displayed again.

7.7 Switching off the cooler

➤ Empty the cooler.

➤ Switch the cooler off.

➤ Pull out the connection cable.

If you do not want to use the cooler for a longer period of time:

➤ Leave the cover slightly open. This prevents odour build-up.

7.8 Defrosting the cooler

Humidity can form frost in the interior of the cooling device or on the vaporiser. This

reduces the cooling capacity. Defrost the device in good time to avoid this.

A

To defrost the cooler, proceed as follows:

➤ Take out the contents of the cooler.

➤ If necessary, place them in another cooling device to keep them cool.

➤ Switch off the device.

➤ Leave the cover open.

➤ Wipe off the defrosted water.

NOTICE! Danger of damage!

Never use hard or pointed tools to remove ice or to loosen objects

which have frozen in place.

CF80_CF110-O-US.book Seite 19 Mittwoch, 30. August 2017 2:57 14

EN

Operation CoolFreeze

20

7.9 Replacing the AC fuse

!

➤ Pull off the connection cable.

➤ Pry out the fuse insert (fig. 3 2, page 3) with a screwdriver.

➤ Replace the defective fuse with a new of the same type and rating

(T2.5AL 250 V).

➤ Press the fuse insert back into the housing.

7.10 Replacing the DC plug fuse

➤ Pull the adapter sleeve (fig. 6 4, page 5) off of the plug.

➤ Unscrew the screw (fig. 6 5, page 5) out of the upper half of the housing

(fig. 6 1, page 5).

➤ Carefully raise the upper half of the housing from the lower (fig. 6 6, page 5)

half.

➤ Take out the contact pin (fig. 6 3, page 5).

➤ Replace the defective fuse (fig. 6 2, page 5) with a new fuse of the same type

and rating (3AG, Fast Acting, 8 A).

➤ Re-assemble the plug in the reverse order.

7.11 Replacing the light bulb

➤ Press the switch pin (fig. 7 2, page 5) downwards so that the transparent part

(fig. 7 1, page 5) of the lamp can be removed at the front.

➤ Replace the light bulb.

I

➤ Press the transparent part of the lamp back into the housing.

WARNING! Danger of electrocution!

Disconnect the connection cable before you replace the device fuse.

NOTE

The LEDs in the light bulb must be aligned with the transparent part of

the lamp.

CF80_CF110-O-US.book Seite 20 Mittwoch, 30. August 2017 2:57 14

Page is loading ...

Dometic CoolFreeze CF80, CF110 Operating instructions

This manual is also suitable for

Dometic CoolFreeze CF80, CF110 Operating instructions

in other languages

Related papers

Other documents