INSTALLATION INSTRUCTIONS
RFK-CF36RT - 36'' Rear/Top Vent Clean Face Retrot Kit
For models (V)CD36RN(E), (V)CD36RP(E), (V)CD36TN(E), and (V)CD36TP(E) series replaces
125629-01
Rev. A
10/10
FMI PRODUCTS, LLC 2701 S. Harbor Blvd. Santa Ana, CA 92704 1-866-328-4537 www.fmiproducts.com
Align These
Holes
Align
These
Holes
Shoulder Screw
Mounting template
Door Latch
Mounting Template
#28 Drill Size
(0.14 Dia. Hole)
#38 Drill Size
(0.10 Dia.)
Holes (4 X)
Top Side Face of Fireplace
(Left Side Shown)
Bottom Side Face of
Fireplace (Left Side Shown)
• Positiondoorlatchmountingtemplateinfrontofreplacesidefaceandalignholesasshown.
• Mark location of four door latch mounting holes and drill holes using #38 drill bit.
• Securemagneticdoorlatchusingfour#5x½”screwsprovided.
• Positionshoulderscrewmountingtemplateinfrontofreplacesidefaceandalignholesasshown.
• Marklocationofshoulderscrewmountingholeanddrillholeusing#28drillbit.
• Fastenshoulderscrew.
INSTALLING HOOD
Slidethehoodbelowtheupperfaceframeandalignmountingholesofhoodwithholesonthefaceframe.
Securewiththree#8X½”screws.
Parts included in this kit:
Part No. Description Qty.
11164 #8x½”screw 3
125558-01 #5x½”screw 8
125631-01 ShoulderScrewMountingPlate1
125632-01 Door Latch Mounting Plate 1
125519-01 Magnetic Door Latch 2
125629-01 Instruction Sheet 1
099230-02ShoulderScrew2