Insignia NS-PWSPPYR19 Quick setup guide

  • Hello! I am an AI chatbot trained to assist you with the Insignia NS-PWSPPYR19 Quick setup guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PACKAGE CONTENTS
Desktop Power Station
Quick Setup Guide
FEATURES
Six AC outlets: Provide
continuous AC power
Three USB charging or
power ports, 6.3A total
charge current: Fast
charging for three
smartphones or tablets
32 dB EMI/RFI noise ltering: Assures that your devices receive only clean power for
maximum product performance
900 joules surge protection: Protects your devices from damaging power surges and
spikes
• Protected LED indicator: Lights when the surge protection feature is working
properly. If this LED does not light or goes out, the surge protection feature has
reached full capacity and can no longer absorb additional surges and spikes. The surge
protector should be replaced if this light goes out
• Innovative design: Practical and convenient, ideal for the desk, conference table, or
home
• USB-IF Certied: USB charging ports comply with USB-IF standards
USING YOUR DESKTOP POWER STATION
1 Plug the power cord of the power station into a standard 125V AC outlet. If the LEDs
do not light up, press the main power switch/circuit breaker on the side of the unit.
2 Plug the power cords from up to six devices into the AC outlets on the surge
protector.
3 Plug you USB devices into the USB ports to charge them.
TROUBLESHOOTING
SAFETY INFORMATION
RISK OF ELECTRIC SHOCK - Use only in dry locations and only indoors.
DO NOT plug into another relocatable power tap.
DO NOT daisy chain surge protectors.
DO NOT use with any aquarium equipment.
DO NOT use if correctly grounded outlets are not available.
DO NOT install this device if there is not at least 30 feet (10 meters) or more of wire
between the electrical outlet and electrical service panel.
DO NOT use in any circumstance that would aect the operation or reliability of life
support equipment, any medical applications, or patient care.
This device features internal protection that will disconnect the surge protective
component at the end of its useful life, but will maintain power to the load – WHICH
WILL BE UNPROTECTED. If you don’t want your equipment at risk, follow the
manufacturers instructions for replacing the device.
Before using your new product, please read these instructions to prevent any damage
QUICK SETUP GUIDE
Desktop
Power Station
NSPWSPPYR19
SOLUTION:
Make sure that your power station is plugged into a working,
grounded AC outlet.
Make sure that all power cords are connected correctly and make
sure that the power outlet is not switched (and turned o).
Note: Test the outlet with a working lamp. Try both top and bottom
outlets.
Make sure that the power station switch and connected devices
are turned on.
PROBLEM:
Devices
connected to
your power
station do not
turn on.
ON/OFF control
AC outlets
AC outlets
AC outlets
USB outlets
LED indicator
Power cord
LEGAL NOTICES
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
WARNING: This product can expose you to chemicals including styrene, which is
known to the State of California to cause cancer. For more information, go to
www.p65warnings.ca.gov.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2018 Best Buy. All rights reserved.
Made in China
SPECIFICATIONS
Dimensions (L×W×H): 7.9 × 8.1 × 1.8 in.
(20.2 × 20.6 × 4.6 cm) (not including power cord)
Power cord: 6 ft. (1.8 m)
Outlets: 6
USB charging current: 6.3A
Load rating: 15 amps
Line voltage: 125V AC @ 60 Hz
Surge protection: 3 lines (L-N / L-G / N-G)
Maximum surge current: 45,000 amps
Maximum energy dissipation: 900 joules
Clamping voltage: L-N / L-G / N-G = 500 volts
EMI/RFI noise ltering: Up to 32 dB
Certication UL-1449 certied
V1 ENGLISH 18-0101
/