Teeter Storage Caddy - ComforTrak User guide

  • Hello! I've reviewed the user manual for the Teeter Storage Caddy SC1001. This accessory is designed to hold your personal items while using your Teeter Inversion Table. It easily attaches to the A-frame and can be placed on either the left or right side. I'm ready to answer any questions you might have about using it, or its assembly.
  • Can I put heavy objects on the Storage Caddy?
    Can I put uncovered cups of hot liquid in the Storage Caddy?
    Where can I install the Storage Caddy?
DO NOT place heavy objects or rest your body weight on product.
DO NOT insert uncovered cups of hot liquid – if the liquid spills, you could be burned.
Assembly & User Instructions
WARNING
!
Inversion Table Storage Caddy
• On the LEFT outside of the inversion table A-frame, with the logo on the
Storage Caddy facing outwards, seat the hook notch over the bolt that joins
the Spreader Arm and FRONT A-frame leg (Figure 1).
• Gently press down so that the entire Storage Caddy hook is resting on the
Spreader Arm (Figure 2).
• Check that the Storage Caddy is stable and installed on the outside of the
A-frame so that it does not interfere with the operation of the inversion table.
• Before folding the inversion table for storage, remove the Storage Caddy to
allow the Spreader Arms to fold up.
How to Assemble
With the Storage Caddy, you can keep personal items like your water bottle, keys, phone or eyeglasses within reach while
using your Teeter Inversion Table!
FIGURE 1
FIGURE 2
Teeter and Teeter logo are registered trademarks of Teeter. Specifications subject to change without notice.
© COPYRIGHT 2015 Teeter. International Law Prohibits Any Copying. SC1001 0715-0
EN
HOOK
NOTCH
Alternatively, the Storage Caddy can be installed
on the RIGHT, REAR side of the A-frame.
/