1. Remove the 3 bolts on the side trim using a T30 Torx bit. See Photo 1.
2. Insert the L-Bolts into the holes in the frame bar. See Photo 2.
3. Align the holes and insert the stock bolts using a T30 Torx bit. See Photo 3.
4. Install the curved spacers over the L-Bolts. See Photo 4.
5. Install the Rock Slider, flat washer, and lock nut in that order. Tighten using an 18mm socket/wrench. See Photo 5.
Photo 1 Photo 2
Photo 3 Photo 4
Photo 5
Remove 3 bolts on side trim. Insert L-Bolts into holes in frame bar.
Align hole and insert stock bolts. Install curved spacers over L-Bolts.
Install Rock Slider, flat washer, and lock nut.
INSTALLATION INSTRUCTONS
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all
applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the
buyers responsibility to comply with all Federal, State and Local laws governing the sales of any items
listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country,
LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.