CYBEX CY 171 Car Seat Operating instructions

  • Hello! I've reviewed the instructions for the Cybex Cloud Q Remedy Kit, and I'm here to help. This document provides instructions on how to replace the harness adjuster strap and metal splitter plate of your car seat. It includes detailed steps on cutting, taping, and pulling the strap through the correct slot. Feel free to ask any questions about this procedure.
  • What is the first step in using the remedy kit?
    What should be done with the adjuster strap once accessed?
    What do you do after taping the new strap?
CY_171_9316_A0522
Cloud Q Remedy Kit
Cybex Customer Care:
1-877-242-5676
Instructional
Videos
https://cybex-online.com/en-us/
safety-notice-and-recalls/sirona-m
1. Turn seat over to access
harness adjuster strap and
splitter plate.
8. Seat is now ready to use.
2. Cut adjuster strap just below
sewn plate as shown. Cut in
a straight line, and only cut
once. Do not pull adjuster
strap out of slot.
3. Attach new adjuster strap and
metal splitter plate to harness
above the sewn splitter.
4. Fold harness behind
splitter plate.
5. Tape new adjuster strap to
original adjuster strap with
supplied tape as shown.
Press tape firmly in place.
6. Pull adjuster strap through
the harness adjuster slot. Pull
until original strap is out and
new strap is through the slot.
7. Remove original strap
and tape, and discard.
1. Turn seat over to access
harness adjuster strap and
splitter plate.
8. Seat is now ready to use.
2. Cut adjuster strap just below
sewn plate as shown. Cut in
a straight line, and only cut
once. Do not pull adjuster
strap out of slot.
3. Attach new adjuster strap and
metal splitter plate to harness
above the sewn splitter.
4. Fold harness behind
splitter plate.
5. Tape new adjuster strap to
original adjuster strap with
supplied tape as shown.
Press tape firmly in place.
6. Pull adjuster strap through
the harness adjuster slot. Pull
until original strap is out and
new strap is through the slot.
7. Remove original strap
and tape, and discard.
/