Jenn-Air LANAI JED7430AAB Product Dimensions

Brand: Jenn-Air

Model: LANAI JED7430AAB

Type: Product Dimensions

This manual is also suitable for

LANAITM DOWNDRAFT COOKTOP

1. Where possible, 6" (15.2 cm) is recommended for motor blower service. Minimum clearance of 1" (2.5 cm)

is required to sidewalls and 3/4" (1.9cm) to rear wall.

2. Provide 2" minimum (5.1 cm) cabinet clearance to motor for cooling purpose.

3. Provide 6 1/4" minimum (15.9 cm) required for removal of (supplied) grease container(s).

Installed dimension for (supplied) grease container(s) is 5 1/2" (14.0 cm)

4. Grills installed near a side wall must allow a minimum clearance of 6" (15.2 cm) between cooktop and side wall

for maximum performance.

5. Vents up to 60 equivalent feet.

6. This appliance has been designed in accordance with the requirements of various safety agencies and comply

with the maximum allowable wood cabinet temperatures of 194˚ F. If these appliances are installed with cabinets

that have a lower working temperature than 194˚ F, discoloration, delamination or melting may occur.

Electrical requirements: Provide for 120/240 or 120/208 VAC, 60 Hz. The unit must be properly circuitprotected

and wired according to local electrical codes.

NOTES:

Style of product may vary from picture

MODEL SKUs

JED7430AAB

PRODUCT DIMENSIONS

INCHES CENTIMETERS

A 28 7/8 1/16 73.3 .2

B 20

15/16 1/16 53.2 .2

C 9 3/8 23.8

D 7

9/16 19.2

F 13 33.0

G 1

7/8 min 4.8 min

H 15 5/8 min 39.7 min

J 14 35.6

K 11 7/8 30.2

L2 2 min 5.1 min

M 3 7.6

N3 6

1/4 min 15.9 min

P 29 7/8 75.9

Q 21

1/2 54.6

Important: Because of continuing product improvements, Jenn-Air® reserves the right to change specifications without notice. Dimensional specifications are provided for

planning purposes only. For complete details see installation instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.