2. Home
  3. Home security & automation
  4. Security camera accessories
  5. Digital Watchdog
  6. DWC-PZCMW Ceiling Mount Bracket for Multi Sensor Cameras

Digital Watchdog DWC-PZCMW Ceiling Mount Bracket for Multi Sensor Cameras User guide

  • Hello! I've reviewed the Quick Start Guide for the Ceiling mount bracket DWC-PZCMW. This document details the installation process, including the use of mounting screws, anchors, and a safety wire. It also cautions against touching the camera lenses. I'm ready to answer your questions about this device and its setup.
  • What accessories are included?
    How to mount bracket?
    How to use safety wire?
DWC-PZCMW
Ceiling mount bracket for multi-sensor cameras
Quick Start Guide
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
WHAT’S IN THE BOX
Camera Mounting Screws 2Mounting Pad 1
Screws and Plastic Anchors 4Mounting Template 1
Safety Wire 1Quick Setup Guide
Hexagonal Wrench 1
2. Installation 3. Dimension
Quick Manual
Ver. 1.0 / 2020.02
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Multi-Sensor Outdoor Dome Camera
Ceiling Bracket Manual
1. Accessories
Screw &
Plastic Anchor-4pcs
Manual
Mount Screw Safety Wire
Allen Wrench
Mount Pad
202
278
2
3
4
1Fix it with Safety Wire on the Bottom
case and fasten it to fit the joint of
Bracket and Bottom case well.
Remove the Rubber cap and tighten it
with a screw.
Secure the dome cover to the camera’s
bottom case using the torx wrench.
Remove the protective film from the
camera’s dome to complete the
installation.
UNLOCK
LOCK
2. Installation 3. Dimension
Quick Manual
Ver. 1.0 / 2020.02
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Multi-Sensor Outdoor Dome Camera
Ceiling Bracket Manual
1. Accessories
Screw &
Plastic Anchor-4pcs
Manual
Mount Screw Safety Wire
Allen Wrench
Mount Pad
202
278
2
3
4
1Fix it with Safety Wire on the Bottom
case and fasten it to fit the joint of
Bracket and Bottom case well.
Remove the Rubber cap and tighten it
with a screw.
Secure the dome cover to the camera’s
bottom case using the torx wrench.
Remove the protective film from the
camera’s dome to complete the
installation.
UNLOCK
LOCK
2. Installation 3. Dimension
Quick Manual
Ver. 1.0 / 2020.02
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Multi-Sensor Outdoor Dome Camera
Ceiling Bracket Manual
1. Accessories
Screw &
Plastic Anchor-4pcs
Manual
Mount Screw Safety Wire
Allen Wrench
Mount Pad
202
278
2
3
4
1Fix it with Safety Wire on the Bottom
case and fasten it to fit the joint of
Bracket and Bottom case well.
Remove the Rubber cap and tighten it
with a screw.
Secure the dome cover to the camera’s
bottom case using the torx wrench.
Remove the protective film from the
camera’s dome to complete the
installation.
UNLOCK
LOCK
2. Installation 3. Dimension
Quick Manual
Ver. 1.0 / 2020.02
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Multi-Sensor Outdoor Dome Camera
Ceiling Bracket Manual
1. Accessories
Screw &
Plastic Anchor-4pcs
Manual
Mount Screw Safety Wire
Allen Wrench
Mount Pad
202
278
2
3
4
1Fix it with Safety Wire on the Bottom
case and fasten it to fit the joint of
Bracket and Bottom case well.
Remove the Rubber cap and tighten it
with a screw.
Secure the dome cover to the camera’s
bottom case using the torx wrench.
Remove the protective film from the
camera’s dome to complete the
installation.
UNLOCK
LOCK
2. Installation 3. Dimension
Quick Manual
Ver. 1.0 / 2020.02
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Multi-Sensor Outdoor Dome Camera
Ceiling Bracket Manual
1. Accessories
Screw &
Plastic Anchor-4pcs
Manual
Mount Screw Safety Wire
Allen Wrench
Mount Pad
202
278
2
3
4
1Fix it with Safety Wire on the Bottom
case and fasten it to fit the joint of
Bracket and Bottom case well.
Remove the Rubber cap and tighten it
with a screw.
Secure the dome cover to the camera’s
bottom case using the torx wrench.
Remove the protective film from the
camera’s dome to complete the
installation.
UNLOCK
LOCK
2. Installation 3. Dimension
Quick Manual
Ver. 1.0 / 2020.02
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Multi-Sensor Outdoor Dome Camera
Ceiling Bracket Manual
1. Accessories
Screw &
Plastic Anchor-4pcs
Manual
Mount Screw Safety Wire
Allen Wrench
Mount Pad
202
278
2
3
4
1Fix it with Safety Wire on the Bottom
case and fasten it to fit the joint of
Bracket and Bottom case well.
Remove the Rubber cap and tighten it
with a screw.
Secure the dome cover to the camera’s
bottom case using the torx wrench.
Remove the protective film from the
camera’s dome to complete the
installation.
UNLOCK
LOCK
2. Installation 3. Dimension
Quick Manual
Ver. 1.0 / 2020.02
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Multi-Sensor Outdoor Dome Camera
Ceiling Bracket Manual
1. Accessories
Screw &
Plastic Anchor-4pcs
Manual
Mount Screw Safety Wire
Allen Wrench
Mount Pad
202
278
2
3
4
1Fix it with Safety Wire on the Bottom
case and fasten it to fit the joint of
Bracket and Bottom case well.
Remove the Rubber cap and tighten it
with a screw.
Secure the dome cover to the camera’s
bottom case using the torx wrench.
Remove the protective film from the
camera’s dome to complete the
installation.
UNLOCK
LOCK
Quick Start Guide
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
INSTALLATION
2. Installation 3. Dimension
Quick Manual
Ver. 1.0 / 2020.02
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Multi-Sensor Outdoor Dome Camera
Ceiling Bracket Manual
1. Accessories
Screw &
Plastic Anchor-4pcs
Manual
Mount Screw Safety Wire
Allen Wrench
Mount Pad
202
278
2
3
4
1Fix it with Safety Wire on the Bottom
case and fasten it to fit the joint of
Bracket and Bottom case well.
Remove the Rubber cap and tighten it
with a screw.
Secure the dome cover to the camera’s
bottom case using the torx wrench.
Remove the protective film from the
camera’s dome to complete the
installation.
UNLOCK
LOCK
Ceiling mount
Camera base
Camera dome cover
1 Using the mounting template or the mounting bracket itself, mark and drill the
necessary holes on the mounting surface.
2 Secure the mounting bracket to the mounting surface using the screws and
anchors included. Use the mounting pad between the bracket’s arm and
mounting surface as needed.
3 Ax the safety wire at the bottom of the mounting bracket’s case. Connect the
other side of the safety wire to the base of the camera.
4 Pass wires through and make all necessary connections.
5 Secure the camera to the mounting bracket using
the included screws. Align the indented lines on the
side of the camera with the lines on the mounting
bracket as seen in the image on the right.
Rotate the camera clockwise to lock into position.
6 Adjust the camera modules’ position and angle and complete the installation
by placing the dome cover on the camera. Secure the dome cover to the camera
base using the screws included with the camera. See the camera’s QSG for
more information.
NOTE: Do not touch the lenses when handling the camera modules.
Rev: 08/22
/