Eaton COM-EIB2-TP Operating instructions

Type
Operating instructions

Eaton COM-EIB2-TP is a communication module that enables the integration of various devices into a KNX system. It provides a simple and reliable way to control and monitor devices, such as lighting, heating, ventilation, and security systems, from a central location.

The COM-EIB2-TP supports up to 254 devices on a single bus segment and can be used in both new and existing KNX installations. It is easy to install and configure, and does not require any special tools or software.

Some of the key features of the COM-EIB2-TP include:

  • KNX certified: The COM-EIB2-TP is certified by the KNX Association, which ensures that it meets the highest standards of quality and interoperability.

Eaton COM-EIB2-TP is a communication module that enables the integration of various devices into a KNX system. It provides a simple and reliable way to control and monitor devices, such as lighting, heating, ventilation, and security systems, from a central location.

The COM-EIB2-TP supports up to 254 devices on a single bus segment and can be used in both new and existing KNX installations. It is easy to install and configure, and does not require any special tools or software.

Some of the key features of the COM-EIB2-TP include:

  • KNX certified: The COM-EIB2-TP is certified by the KNX Association, which ensures that it meets the highest standards of quality and interoperability.
02/2018 IL04802024Z
Beipack-Informationen
Instruction Leaflet
COM- EIB2-TP
02/2018 IL04802024Z COM- EIB2-TP
2EATON CORPORATION www.eaton.eu
Dokumentation für die Arbeiten mit dem Gerät
Für die Arbeiten mit dem Gerät sind folgende Dokumente verfügbar:
Die Dokumente können heruntergeladen werden von:
www.eaton.eu/doc (Dokumente-Nr. suchen via Suchfeld der Homepage)
Hersteller
Eaton Industries GmbH
Hein-Moeller-Strasse 7-11
53115 Bonn
Germany
www.eaton.eu
www.eaton.com
Support
WARNUNG
Arbeiten ohne Betriebsanleitung
Arbeiten ohne oder mit einzelnen Seiten aus der Betriebsanlei-
tung, kann durch nicht Beachten von sicherheitsrelevanten Infor-
mationen zu Sach- und Personenschaden führen.
Vor dem Arbeiten mit dem Gerät, die erforderlichen Doku-
mente organisieren und Kapitel «Sicherheitsvorschriften»
durchlesen.
Arbeiten nur unter Berücksichtigung der erforderlichen Doku-
mente durchführen.
Immer mit vollständigem Original-Dokument arbeiten.
Dokument Dokumente-Nr.
Betriebsanleitung Kommunikationsbaugruppe EIB2-TP MN04802029Z-DE
Region North America
Eaton Corporation
Electrical Sector
1111 Superior Ave.
Cleveland, OH 44114
United States
877-ETN-CARE (877-386-2273)
www.eaton.com
Andere Regionen
Bitte kontaktieren Sie Ihren lokalen
Lieferanten oder senden Sie eine E-Mail an:
COM- EIB2-TP 02/2018 IL04802024Z
EATON CORPORATION www.eaton.eu 3
Documentation for working with the device
The following documents are available for working with the device:
The documents can be downloaded from:
www.eaton.eu/doc
(search document No. via search field of the home page)
Manufacturer
Eaton Industries GmbH
Hein-Moeller-Strasse 7-11
53115 Bonn
Germany
www.eaton.eu
www.eaton.com
Support
WARNING
Working without operating instructions
Working without operating instructions or with individual pages
from the operating instructions may result in damage to property
and personal injury if relevant safety information is not observed.
Before working with the device, organize the required docu-
ments and read the section «Safety requirements».
Work should only be carried out in accordance with the instruc-
tions of the relevant documents.
Always work with the complete original document.
Document Document No.
User Manual Communication Module EIB2-TP MN04802029Z-EN
North America region
Eaton Corporation
Electrical Sector
1111 Superior Ave.
Cleveland, OH 44114
United States
877-ETN-CARE (877-386-2273)
www.eaton.com
Other regions
Please contact your local supplier or send an
Email to: automation@eaton.com
02/2018 IL04802024Z COM- EIB2-TP
All other trademarks are property of their
respective owners.
Eaton.com/recycling
© 2013 Eaton Industries GmbH
All Rights Reserved
Printed in Germany
Publication No. IL04802024Z
02/2018
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Eaton COM-EIB2-TP Operating instructions

Type
Operating instructions

Eaton COM-EIB2-TP is a communication module that enables the integration of various devices into a KNX system. It provides a simple and reliable way to control and monitor devices, such as lighting, heating, ventilation, and security systems, from a central location.

The COM-EIB2-TP supports up to 254 devices on a single bus segment and can be used in both new and existing KNX installations. It is easy to install and configure, and does not require any special tools or software.

Some of the key features of the COM-EIB2-TP include:

  • KNX certified: The COM-EIB2-TP is certified by the KNX Association, which ensures that it meets the highest standards of quality and interoperability.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages