Topeak TW006 Owner's manual

Topeak
Brand
Topeak
Model
TW006
Category
Bicycles
Type
Owner's manual

Topeak TW006 is designed for supporting and easily maintaining your bike. It can hold bikes with a maximum weight of 14 kgs (30.8 lbs) and is suitable for 700c road bikes and 26" mountain bikes. The FlashStand is not designed to be used on any bikes with obstructions on the downtube at 110mm to 140mm from the bottom bracket center, ie. shock mounts, water bottle mounts/cages, etc. Additionally, it was not designed for bikes using Shimano Nexave series shifters, or mountain bikes with tires larger than 26" x 2.25".

Topeak TW006 is designed for supporting and easily maintaining your bike. It can hold bikes with a maximum weight of 14 kgs (30.8 lbs) and is suitable for 700c road bikes and 26" mountain bikes. The FlashStand is not designed to be used on any bikes with obstructions on the downtube at 110mm to 140mm from the bottom bracket center, ie. shock mounts, water bottle mounts/cages, etc. Additionally, it was not designed for bikes using Shimano Nexave series shifters, or mountain bikes with tires larger than 26" x 2.25".

USER'S GUIDEUSER'S GUIDE
FlashStand
GB
Prepare to Ride
USER'S GUIDE
ASSEMBLY
21 3
567
4
x
NO
o
YES
Make sure the hook is
installed properly to avoid
damaging the arm.
Hook
Arm
Loosen Tighten
For 26" Mountain BikesFor 700c Road Bikes
USER'S GUIDE
USER'S GUIDE
INSTALLATION
FlashStand
Repair & storage solutions
Maximum loading weight limitation:
Bike's weight should not exceed 14 kgs (30.8 lbs).
WARNING
2
1
2
USER'S GUIDE
USER'S GUIDE
x
NO
NO
YES
BB center
110mm
140mm
WARNING
USER'S GUIDE
Topeak products are available only from professional bicycle shops.
Please contact your nearest Topeak authorized bicycle dealer for any questions.
For customers in the USA, call: 1-800-250-3068 Website: www.topeak.com
2-year
Warranty: All mechanical components against manufacturer defects only.
LIMITED WARRANTY
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items
returned without a sales receipt will assume that the warranty begins on the
date of manufacture. All warranties will be void if the FlashStand is damaged
due to user abuse, overload, system alteration, modification, or used in any
way not intended as described in this user's guide.
Copyright © Topeak, Inc. Printed in Taiwan / 2005 M-TW006-GB 5/05
Topeak FlashStand is designed for supporting and
easily maintaining your bike. Please read all
instructions and warnings carefully before using it.
The specifications and design are subject to change without notice.
*
Never put weight on the bike when it is installed on the
FlashStand. Doing so will damage the arm.
Never spin the rear wheel at high revolutions or apply your
rear brake to a fast spinning wheel when your bike is
installed on the FlashStand. The forces generated by the
spinning wheel or a fast spinning wheel with sudden brake
application will damage the FlashStand. For added stability,
it is recommended to hold the handlebar with one hand
when rotating the pedals.
Make sure the hook is installed properly to avoid damaging
the arm.
The FlashStand is not designed to be used on any bikes
with obstructions on the downtube at 110mm to 140mm from
the bottom bracket center, ie. shock mounts, water bottle
mounts/cages, etc. Additionally, it was not designed for
bikes using Shimano Nexave series
shifters,
or mountain
bikes with tires larger than 26" x 2.25".
Tighten bolts on FlashStand if they become loose. Please
do not over tighten to the point that the FlashStand is
difficult to unfold.
Maximum loading weight limitation:
Bike's weight should not exceed 14 kgs (30.8 lbs).
Not recommended for use on grass, loose dirt, gravel or
uneven surfaces.
WARNING
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Topeak TW006 Owner's manual

Topeak
Brand
Topeak
Model
TW006
Category
Bicycles
Type
Owner's manual

Topeak TW006 is designed for supporting and easily maintaining your bike. It can hold bikes with a maximum weight of 14 kgs (30.8 lbs) and is suitable for 700c road bikes and 26" mountain bikes. The FlashStand is not designed to be used on any bikes with obstructions on the downtube at 110mm to 140mm from the bottom bracket center, ie. shock mounts, water bottle mounts/cages, etc. Additionally, it was not designed for bikes using Shimano Nexave series shifters, or mountain bikes with tires larger than 26" x 2.25".

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents