Listen EVERYWHERE LW-DK14 Quick start guide

Introduction

Thank you for your interest in Listen EVERYWHERE. Here is some information to get your demo started.

For more information and full product manual, please visit www.listentech.com/support/manuals.

Power On and Connect Audio

Remove the power cord from the back compartment and connect to a wall outlet. Please wait 30 seconds after

connecting the power cord to the wall outlet before pressing the power button on the power cube. The tablet

audio is already connected to the Listen EVERYWHERE system, so simply tap on a video to begin playing the

audio for “Channel 1”.

Optional

If you would like to connect a secondary audio source (from phone, computer or other source), remove

the 3.5mm audio connector from the back compartment and plug into the audio source. To listen to

this audio source, simply click on “Channel 2” in the app.

Listen EVERYWHERE

Demo Kit – Quick Start Guide – LW-DK14

LISTEN TECHNOLOGIES 14912 Heritage Crest Way, Bludale, Utah 84065-4818 USA

www.listentech.com

For full user manual visit www.listentech.com/support/manuals/

Tablet (to demo one

channel of audio)

Tablet power button

Power cube

LW-100P Listen

EVERYWHERE 2

channel server

Server power

button

Aux cord

Power cord

Download the Listen

EVERYWHERE App

Connect App to Server

Connect smartphone to

“Listen Everywhere” network.

Launch App

Once connected, open the

Listen Everywhere app, tap

“scan”, select the channel to

stream and enjoy!