Minka Lavery 3296-613 Installation guide

3296-613
Brand
Minka Lavery
Model
3296-613
Type
Installation guide

Minka Lavery 3296-613 is an indoor lighting fixture designed for ceiling mounting. It comes with all the necessary hardware for easy installation and includes a circular strap, mounting screws, and a green screw for grounding. The fixture has multiple sockets, allowing you to install various light bulbs (not included) up to the maximum wattage specified in the manual. With its elegant design, it's suitable for various rooms in your home.

Minka Lavery 3296-613 is an indoor lighting fixture designed for ceiling mounting. It comes with all the necessary hardware for easy installation and includes a circular strap, mounting screws, and a green screw for grounding. The fixture has multiple sockets, allowing you to install various light bulbs (not included) up to the maximum wattage specified in the manual. With its elegant design, it's suitable for various rooms in your home.

INSTALLATION INSTRUCTIONS
Item #3296-613 (New. 11/18/2015)
READ AND SAVE THESE INSTRUCTIONS
WA R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig. 1
Fig. 2
ASSEMBLING THE FIXTURE (Fig.1)
1. Shut off the power at the fuse box or circuit breaker. If
necessary, remove the old fixture, including the
mounting hardware.
2. Carefully unpack the new fixture and lay out all the
parts on a clear area. Take care not to lose any parts
necessary for installation.
3. Thread Screw (A) into the pre-drilled holes in the
circular strap (B) spaced the same distance apart as
the holes in the back-plate and secure with Hex Nut
(C).
4. Attach the circular strap (B) to the outlet box using
the Mounting screws (D). The side of the mounting
plate marked “GND” must face out.
CONNECTING THE WIRES (Fig. 2)
5. At this point, connect the electrical wire as shown in
figure 2, making sure that all wire connectors are
secured. If your outlet has a ground wire (green or
bare copper), connect the fixtures ground wire to it.
Otherwise, connect the fixture ground wire directly to
the circular strap and secure with the green screw
provided. After wires are connected, tuck them
carefully into the ceiling junction box.
FINISHING THE INSTALLATION (Fig. 1)
6. Place canopy (E) over the screw (A) and fasten with
knurled knob (F).
7. Place the metal tubes (H) over the socket (I) of the
fixture body.
8. Install the light bulb(s) (not included) in accordance
with the fixture’s specifications. (DO NOT EXCEED
THE MAXIMUM WATTAGE RATING!) (NE PAS
DEPASSER LA PUISSANCE NOMINALE
MAXIMALE!).
Your installation is now complete. Return power to
the junction box and test the fixture.
Note: Illustration (Fig. 1) on this manual is for
installation purposes only. It may or may not be
identical to the fixture purchased.
LA-2524E
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green
(Ground)
Set
#
A
-
022
- Circular strap
- Ground screw
- Mounting Screw*2
E
F
H
I
A
B
C
D
  • Page 1 1

Minka Lavery 3296-613 Installation guide

3296-613
Brand
Minka Lavery
Model
3296-613
Type
Installation guide

Minka Lavery 3296-613 is an indoor lighting fixture designed for ceiling mounting. It comes with all the necessary hardware for easy installation and includes a circular strap, mounting screws, and a green screw for grounding. The fixture has multiple sockets, allowing you to install various light bulbs (not included) up to the maximum wattage specified in the manual. With its elegant design, it's suitable for various rooms in your home.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents