Panasonic SC-PMX802 CD Stereo System User guide

Brand: Panasonic

Model: SC-PMX802 CD Stereo System

Category: Digital audio streamers

Type: User guide

CD Stereo System

Model No. SC-PMX802

SA-PMX802M

F0721MH0

Networking Guide

Network settings

You can stream online music services or music files from

your smartphone/tablet to this system. To use these

features, this system must join the same

internet-connected network as the compatible device.

This system can be connected to a router using a LAN

cable or built-in Wi-Fi®. For a stable connection to the

network, a wired LAN connection is recommended.

Note:

• If you try to change the network settings immediately after

turning on this system, it may take some time until the

network setup screen is displayed.

• If “Firmware update is available” is displayed after the

network connection is set up, the firmware for this system is

available.

– Refer to “Firmware updates” for details on update.

– For the update information, refer to the following

website.

https://panasonic.jp/support/global/cs/audio/

Preparation

If you install the Google Home app on your smartphone/

tablet, you can set up a connection using the application.

• When using Chromecast built-inTM to play music on this

system, set up a connection using the Google Home app.

• Make sure that the Wi-Fi function is activated on your

smartphones/tablet.

1Install the Google Home app on your smartphone/

tablet.

To download the Google Home app, visit:

https://www.google.com/cast/setup/

2Connect your smartphone/tablet to the same

network as this system before setting.

• Make sure that the network is connected to the internet.

[PMX802]: indicates features applicable to SC-PMX802 only.

[PMX802M]: indicates features applicable to SA-PMX802M only.

SC-PMX802_E_Network.fm 2 ページ２０２１年７月２６日　月曜日　午前９時２０分

1Disconnect the AC mains lead.

2Connect this unit to a broadband router, etc. using

a LAN cable.

3Connect the AC mains lead to this unit and turn

this system on.

• When the connection is established, the network LED

(blue) is lighted on the main unit.

4Press [RADIO, EXT-IN] repeatedly to select

“NETWORK”.

5Open the Google Home app and follow the

on-screen instructions to set up a connection.

(>“Setting the network from the setup menu”)

Note:

• While the AC mains lead is disconnected, the LAN cable

must be connected or disconnected.

• Use category 7 or above straight LAN cables (STP) when

connecting to peripheral devices.

• Inserting any cable other than a LAN cable in the LAN port

can damage this unit.

• When a LAN cable is connected, the Wi-Fi function may be

disabled.

Preparation

1Disconnect the AC mains lead.

2Disconnect the LAN cable.

3Place this unit as close to the wireless router as

possible.

4Connect the AC mains lead to this unit. (>“Making

the connections”)

Note:

• The setting will be cancelled after the set time limit. In that

case, try the setting again.

• When the connection is established, the network LED (blue)

is lighted.

1Press [Í] to turn this unit on.

• “NET SETUP” is displayed.

2Press [2,1] to select “YES” and then press [OK].

• “SETTING” is blinked.

3Open the Google Home app and follow the

on-screen instructions. (>“Setting the network

from the setup menu”)

Note:

• This unit will be displayed as “Panasonic PMX802-****” if the

device name is not set. (“****” stands for characters unique to

each set.)

([PMX802M] Displayed as “Panasonic PMX802M-****”.)

• You can check your network information (SSID, MAC address

and IP address) from the Google Home app.

• Some items on the Google Home app are irrelevant to this

unit.

• When this unit is switched to standby mode and turned on

before the network setting is complete, “NET SETUP” is

displayed. Set “NO” to turn off the display.

1Press [RADIO, EXT-IN] repeatedly to select

“NETWORK”.

2Press [SETUP].

3Press [3,4] repeatedly to select “NET SETUP”

and then press [OK].

• “SETTING” is blinked.

4Open the Google Home app and follow the

on-screen instructions. (As follows)

∫Using the Google Home app

(When using Chromecast built-in with this unit)

You can set up a connection using the Google Home app.

Open the Google Home app and follow the on-screen

instructions to set up a connection.

• When the connection is established, “SUCCESS” is

displayed.

– “FAIL” may be displayed if the connection was not

complete. Try this method again from the setup menu. If

“FAIL” is still displayed, try other methods.

Note:

• This unit will be displayed as “Panasonic PMX802-****” if the

device name is not set. (“****” stands for characters unique to

each set.)

([PMX802M] Displayed as “Panasonic PMX802M-****”.)

• You can check your network information (SSID, MAC address

and IP address) from the Google Home app.

• Some items on the Google Home app are irrelevant to this

unit.

Wired LAN connection

LAN cable

(not supplied)

Broadband router, etc.

e.g.,

Wireless LAN connection

Network setting for the first time

Setting the network from the setup menu

SC-PMX802_E_Network.fm 3 ページ２０２１年７月２６日　月曜日　午前９時２０分

Streaming music over the network

Streaming music on network devices

You can stream music from a smartphone

or computer to this system's speakers by

using an app such as “Panasonic Music

Control” (free of charge).

• iOS : App Store

•Android

TM : Google Play

Preparation

• Complete the network settings. (>“Network settings”)

• Connect the following devices to the same network as

this system.

– Device with “Panasonic Music Control”, etc. installed

– Device containing music

The following steps are based on “Panasonic Music

Control”.

1Turn this system on.

• Check that the network LED (blue) is lighted on the main unit.

• If it is not indicated, check the network settings.

(>“Network settings”)

2Start the app “Panasonic Music Control”.

• Always use the latest version of the app.

3From “Speaker”, select this system as the output

speakers.

4Select a music source.

5Select a song.

Note:

• This unit will be displayed as “Panasonic PMX802-****” if the

device name is not set. (“****” stands for characters unique to

each set.)

([PMX802M] Displayed as “Panasonic PMX802M-****”.)

• When playing back music from the network server (PC with

Windows 8 or later installed, smartphone etc.), add the

contents and folder to the libraries of the Windows Media®

Player, the smartphone etc.

• Playlist of Windows Media® Player can play back only the

contents that are stored in the libraries.

• About supported format, refer to “Specifications”.

– File formats that are not supported by your network server

cannot be played.

• Depending on the contents and the connected equipment,

playback may not be performed properly.

• Ensure to stop playback on your device before turning it off.

Playing music, radio, etc. from

streaming services

This system supports some music streaming services

(Deezer/TIDAL/Internet Radio/Podcasts).

Preparation

• Make sure that the network is connected to the Internet.

• Connect a device with a compatible app installed to the

same network as this system.

1Turn this system on.

• Check that the network LED (blue) is lighted on the main unit.

• If it is not indicated, check the network settings.

(>“Network settings”)

2Start the app “Panasonic Music Control”.

• Always use the latest version of the app.

3From “Speaker”, select this system as the output

speakers.

4Select a music service.

Note:

• This unit will be displayed as “Panasonic PMX802-****” if the

device name is not set. (“****” stands for characters unique to

each set.)

([PMX802M] Displayed as “Panasonic PMX802M-****”.)

• Registration/subscription is required.

• Fees may apply.

• Services, icons, and specifications are subject to change.

• For details, visit the individual music service’s website.

The operations and on-screen display items, etc. of the

app “Panasonic Music Control” are subject to change. For

the latest information, visit

http://panasonic.jp/support/global/cs/audio/app/

(These sites are in English only.)

SC-PMX802_E_Network.fm 4 ページ２０２１年７月２６日　月曜日　午前９時２０分

Listening to music using

Chromecast built-in

This unit is compatible with Chromecast built-in.

For detailed information about Chromecast-enabled apps,

visit: g.co/cast/apps

Preparation

• Complete the network settings. (>“Network settings”)

(Make sure that the network is connected to the Internet.)

• Install the supported application on your device.

• Connect the device to the network currently used at

home.

1Open a Chromecast-enabled app or “Panasonic

Music Control” app on your device (smartphone,

tablet, etc.), and select this unit as the output

speaker.

2Play back the music.

Using Spotify

This unit is compatible with Spotify Connect for the online

music service (Spotify). You can play music from the music

streaming service of Spotify by operating your smartphone,

tablet, etc.

Preparation

• Complete the network settings. (>“Network settings”)

– Make sure that the network is connected to the

Internet.

• Connect the device to be used to the network of this unit.

Use your phone, tablet or computer as a remote

control for Spotify.

Go to spotify.com/connect to learn how

Note:

• The device name of this unit will be displayed as

“Panasonic PMX802-****”*1.

([PMX802M] Displayed as “Panasonic PMX802M-****”.)

• If the device name is set on the Google Home app, the set

name is displayed.

• Registration/subscription is required.

• Spotify Premium requires a usage charge.

• Services, icons, and specifications are subject to change.

*1: “****” stands for a number that is unique to each set.

Using AirPlay

You can play back music stored on iOS device, etc. using

AirPlay.

Preparation

• Complete the network settings. (>“Network settings”)

• Connect the iOS device or PC to the same home network

as this system.

1Turn this system on.

• Check that the network LED (blue) is lighted on the main unit.

• If it is not indicated, check the network settings.

(>“Network settings”)

2iOS device: Start the “Music” app.

PC: Start “iTunes”.

• If the Music app on your iOS device is used, select the

audio file you want to play.

3Select “Panasonic PMX802-****”*1 from the AirPlay

icon.

• Check the volume settings before starting the playback.

(When AirPlay is used for the first time, the volume may

be output at the maximum setting.)

•[PMX802M] Displayed as “Panasonic PMX802M-****”.

4Start play.

• The playback will start with a slight delay.

Note:

• This system can be set to turn on automatically when this

system is selected as the output speakers. (>“Network

standby”)

• Volume changes on the iOS device or iTunes will be applied

to this system. (Refer to the iTunes Help for the required

settings in iTunes.)

• With some iOS and iTunes versions, it may not be possible to

restart the AirPlay playback if the selector is changed (e.g.,

“CD”) or this system is turned off, during the AirPlay playback.

In this case, select a different device from the AirPlay icon of

the Music App or iTunes and then re-select this system as the

output speakers.

• AirPlay will not work when playing back videos on iTunes.

*1: “****” stands for a number that is unique to each set.

Not all music streaming services are available in all

countries/regions. Registration/subscription may be

required, or fees may be charged to use music

streaming services. Services are subject to change or

be discontinued. For details, visit an individual music

streaming service’s website.

SC-PMX802_E_Network.fm 5 ページ２０２１年７月２６日　月曜日　午前９時２０分

Use of the Works with Apple badge means that an accessory has

been designed to work specifically with the technology identified in

the badge and has been certified by the developer to meet Apple

performance standards.

Apple and AirPlay are trademarks of Apple Inc., registered in the

U.S. and other countries.

This product is compatible with AirPlay 2. iOS 11.4 or later is

required.

The Wi-Fi CERTIFIED® Logo is a certification mark of Wi-Fi

Alliance®.

“Wi-Fi®” is a registered trademark of Wi-Fi Alliance®.

“WPA®”, and “WPA2®” are trademarks of Wi-Fi Alliance®.

Windows is a trademark or a registered trademark of Microsoft

Corporation in the United States and other countries.

Android, Google Play, Google Home and Chromecast built-in are

trademarks of Google LLC.

The Spotify Software is subject to third party licenses found here:

https://www.spotify.com/ connect/third-party-licenses.

Important notice:

Before you dispose of or transfer this unit to a third

party, be sure to log out of your music streaming

services accounts to prevent unauthorised use of your

accounts.

SC-PMX802_E_Network.fm 6 ページ２０２１年７月２６日　月曜日　午前９時２０分

Panasonic SC-PMX802 CD Stereo System User guide

Brand: Panasonic

Model: SC-PMX802 CD Stereo System

Category: Digital audio streamers

Type: User guide

Download PDF

report

Panasonic SC-PMX802 CD Stereo System User guide

Panasonic SC-PMX802 CD Stereo System User guide

Related papers

Other documents