ADVANTCO ADA Caster User manual

Hello! I've reviewed the provided document, which is a guide for installing casters. It details the components required, the step-by-step process for assembly, and important precautions to take during installation, such as not laying the unit on its back to prevent damage. I'm ready to help you with any questions you might have about this procedure.
How many bolts are needed per caster?

How many screws are needed per caster?

How many washers are needed per caster?

What should you use to fasten the retrofit plate?

What should you use to fasten the new caster to the retrofit plate?

ADA Caster Installation

Instructions

PER EACH CASTER

4 bolts

4 screws

8 washers

1 retroﬁt plate 1 plate caster

1. Unscrew the unit’s existing caster

2. Use the bolts and washers to fasten the

retroﬁt plate onto the unit’s exisitng cavity

3. Use the screws and washers to fasten the

new caster onto the retroﬁt plate

CAUTION! Never lay unit on its back! Unit should only be plugged in when it has rested in the correct upright position

for at least 24 hours. Failure to meet this requirement will void warranty coverage if compressor damage ensues.