Broan E2 Product information

Category
Motorcycle Accessories
Type
Product information
¢710311\¤
WIRING DIAGRAM
Model: E2EH-010HB
Optional 4-Speed
Blower
!
WARNING
Switch circuit breakers to the “off”
position before servicing the furnace.
240V
Transformer
Cont
1
24V
Red Pig-Tail
White Pig-Tail
7103110
(Replaces 7101710)
Cont 1
CB-A
CB-A
IFS
Top - 10.0
6
E
Cont 1
IFS
Org.
(See Note 7)
Grey Pig-Tail
Fuse
Notes :
See unit data label for
recommended supply wire sizes.
Thermostat anticipator setting :
0.30 Amps
To change blower speed on units
without a relay box installed refer
to installation instructions
Refer to furnace and/or relay box
installation instructions for
thermostat connections.
If any wire in this unit is to be
replaced it must be replaced with
105 C thermoplastic copper wire
of the same gauge.
Not suitable for use on systems
exceeding 120V to ground.
This wire is used with some
accessories. See accessory
Installation Instructions for further
detail.
Refer to Installation Instructions
for complete wiring diagram.
1)
2)
3)
4)
5)
6)
7)
8)
CB = Circuit Breaker
E = Heater Element
IFS = Fan Switch
IFM = Fan Motor
Cont = Contactor
LS = Limit Switch
= Control Plug
Legend:
LS
2
3
4
5
1
Grey
Black
Blue
Yellow
Red
H
L
C
IFM
= Fan Plug
LS
  • Page 1 1

Broan E2 Product information

Category
Motorcycle Accessories
Type
Product information

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI