NIXXO PLATINUM User manual

Brand: NIXXO

Model: PLATINUM

Type: User manual

ABLE OF CONTENTS

Introduction

Features

External View of Nixxo Platinum

Pager

Description of Control Keys

Description of Icons

Basic Pager Operation

1. Initial Set up

2. Basic Operation

User’s Options

1. What Option this Pager has

2. Instructions to Enter User’s

Options

3. Selecting & Changing User’s

Options

Battery Information

1. Low Battery Indication

2. Replacing the Battery

3. Battery Back Up

Getting Started

1. English user’ s Manual 3

2. French User’ s Manual 32

eatures

ntroduction

Welcome to the NIXXO pager world!

This uniquely designed numeric pager, PLATINUM will bring you convenience and

pleasure in your communication world. This user’s manual will guide you from basic

operations to user optional features.

FLEX Capable

16 Messages & 320 Characters Memory

Date & Time Display

Date & Time Display When Power Off

Receiving Time Stamping

Message Full Indication

Alarm

Vibration Alert

User Selectable 4 Melodies Alert & 1 Beep Tone

Message Lock

Selective Erase

Erase All

xternal View of Nixxo Platinum Pager

eatures

Unread Message Indication

Duplicate Message Indication

Memory Retention(When Power Off)

Reflective Backlighting

Auto On/Off Timer

Battery Back-Up

Low Battery Indication

1 AAA Battery

LCD

Function Key

Battery Cover

Belt Chain

Read Key

Holster

Locker

Belt Clip

escription of Icons

escription of Control Keys

: Pager Alert Mode - Beep Tone

: Pager Alert Mode - Melody

: Pager Alert Mode - Vibration

: Message Lock - On

: Alarm Mode - On

: Low Battery Indicator

: Service Area Indicator

: Auto On/Off Timer - On

: Duplicated Message received

: Message continued

Read Key

Reading Message

Selecting Menu

Stopping Alert & Alarm

Function Key

LCD Illumination

Entering Menu Set

Changing Alert Mode

Read KeyFunction Key

asic Pager Operation

1. Initial Set Up

Power ON

o turn the power on, press Function Key for 2

seconds.

Power OFF

To turn the power off, press Function key twice.

“Tone Off?” will be displayed.

Press Read Key to scan through the menu until

you reach “Power Off?” Press Function Key to

turn off.

Note) The pager will still display the date and

time, but the keys do not work at all. And the

pager will not receive pages.

If you wish to turn the pager on, press and

hold the Function key for 2 seconds.

asic Pager Operation

Registering Date And Time

ress Function Key. The back light comes on.

Then press Function Key again. “Tone Off?” will

be displayed.

Press Read Key to scan to “Set Time”.

Press Function Key to select menu.

Then first digit will blink.

ress Read Key to select data.

ress Function Key to enter selected data.

Repeat above steps to set all fields.

Default Settings

Alert Mode : Sound

Alarm : Off

Auto On/Off Timer : Off

Message Lock : Off

Unread Tone Function : Off

asic Pager Operation

2. Basic Operation

Changing Alert Mode

From sound to vibration, press Function Key.

The back light comes on. Then press Function

Key again. “Tone Off?” is displayed.

Press Function Key to confirm. The pager will

beep to confirm change.

From vibration to sound, repeat the procedure above. Look for the speaker symbol

to appear.

Reading Message

When a message is received, the pager alerts the

user via sound alert for 15 sec or vibration for

6sec. and “Page” is displayed. Press Read Key to

read the message.

If the pager has 16 Messages, “Page Full” is

displayed.

If the pager has no message, “No page” is

displayed.

asic Pager Operation

In case the pager has over 16 messages, it erases the oldest one to make room for

the newest one.

To read a message in memory, do the following;

Press Read Key. This displays when the 1st

message was received.

is the sequence of the message in memory.

(the last alphabet) means message address.

Press Read Key again to read your message.

The most recent page is displayed first.

If the message continues to next page, the icon

is displayed.

Press the Ready Key again to read the continued

message.

ser’ s Options

asic Pager Operation

Erasing a Message

If you want to erase the message you are reading,

press Function Key. Back light comes on. Then

press Function Key again.

Pager will ask you to confirm.

Press Function Key to confirm. If not, press Read

Key to cancel.

1. What options this pager has

Menu A

Set Time

Set Alarm

Set Melody

Power Off

Menu B

Erase All

Set Lock Function

Unread Function

Set Auto Timer

ser’ s Options

2. Instruction to Enter User’s Option

Menu A

Press Function Key. The back light comes on.

Then press Function Key again. “Tone Off?” is

displayed.

Press Read Key to scan through the following

menu. Press Function Key to select the menu

you wish to use.

Set time Set Alarm Set Melody Power Off

Erase All Set Lock Function Set Unread Function Set Auto Timer

Menu B

Press Function Key. The back light comes on.

Then press the Function Key again and hold

for 2 seconds. “Tone Off?” is displayed first

then the display changes to “Erase All”, which

is the first option in menu B.

Then press the Read Key to scan menu B. Press Function Key to select the menu.

ser’ s Options

3. Selecting & Changing Options

Menu A

Set Time...Described in Initial Set-up, page 12.

Set Alarm...The procedure is similar to setting Date & Time.

c. Set Melody

Go to menu A and find “Melody Set” mode.

Press Function Key to enter “Melody Set”.

To choose a melody(No. 1~4) or a tone (No.

5), press Read Key. Then press Function Key

to Confirm.

Power Off...Described in Initial Set-up, page 10.

Menu B

Erase All

Press Function Key on “Erase All”. It erases

all stored messages.

b. Set Message Lock Function

You can protect received messages from being erased with this function.

NOTE :

Read all stored messages before you enter this mode.

This procedure will erase all stored messages.

ser’ s Options

Please read the message first. Then press

Function Key. The back light comes on. Press

Function Key again.

“Erase?” is displayed.

Press Read Key.

“Lock?” is displayed. Press Function Key to

confirm. You can see icon when you

read the locked mesage.

Press Read Key to “Set Lock Fcn”

Press Function Key on “Set Lock Fcn”.

Press the Read Key to turn the message lock

On or Off. Press the Function Key to confirm.

If you want to use the function, set “Lock Fcn

On” first.

Then, if you want to protect a received message from being erased, do the

following;

ser’ s Options

If you want to unlock the locked message,

read the message first. Then press Function

Key.

“Unlock” is displayed. Press Function

Key again to confirm.

c. Set Unread Tone Function

If you do not read a received message, the pager alerts you by a beep tone.

To setup “Unread Fcn” On/Off, press

Function Key on “Unread Fcn”. Select

On/Off using Read Key, then press Function

Key to confirm.

attery Information

1. Low Battery Indication

When the battery is low, “Low Battery” is displayed

and the pager will beep.

2. Replacing the Battery

NIXXO PLATINUM is designed to use a single AAA alkaline battery.

To replace the battery, do the following;

Slide locking switch to the unlock position. Slide the battery cover off the pager.

Remove the old battery and insert a new AAA Battery in the direction shown

on the battery compartment.

ser’ s Options

d. Set Auto Timer

If you set Auto timer On, the pager power is off from 1:00 A.M to 5:00 A.M.

Press Function Key on “Set Auto”.

“Auto On/Off” is blinking. Select On/Off

using Read Key, then press Function Key

to confirm.

attery Information

3. Battery Back Up

NIXXO PLATINUM has battery back up function. note)To protect all the memory

when you replace the battery, please change old battery to new one quickly. And

please avoid too much key operation during replacing battery.

Locker(locking Switch)

Battery Cover

NIXXO PLATINUM User manual

Brand: NIXXO

Model: PLATINUM

Type: User manual

Download PDF

report

NIXXO PLATINUM User manual

NIXXO PLATINUM User manual

Other documents