Junesh T1 Pods User manual

Category
Headphones
Type
User manual

Junesh T1 Pods are true wireless earbuds with Bluetooth 5.0 connectivity, offering a stable and reliable connection within a 10-meter range. They feature a sleek and ergonomic in-ear design for a secure and comfortable fit, even during intense activities.

With a 5.5-hour music playtime on a single charge, you can enjoy your favorite tunes for hours on end. The charging case provides an additional 3 charges, extending the total playtime to an impressive 22 hours. The earbuds automatically turn on and pair with your device when taken out of the case, and seamlessly reconnect when put back in.

Junesh T1 Pods are true wireless earbuds with Bluetooth 5.0 connectivity, offering a stable and reliable connection within a 10-meter range. They feature a sleek and ergonomic in-ear design for a secure and comfortable fit, even during intense activities.

With a 5.5-hour music playtime on a single charge, you can enjoy your favorite tunes for hours on end. The charging case provides an additional 3 charges, extending the total playtime to an impressive 22 hours. The earbuds automatically turn on and pair with your device when taken out of the case, and seamlessly reconnect when put back in.

User Guide
V5.0 True Wireless Earbuds
Model: T1 Pods
Introduction:
1Silicon Rubber Loops / Ear Hooks Stabilizer
Note: The earbuds originally come with loops, you can change
them into ear hooks for intense activities.
2. Ear tips
3. Earbuds
01 02 03 04 05
Music play/pause: Short press the button of L or R earphone
once when music is playing
Previous song: Quick press the MFB button of earphone L twice
Next song: Quick press the MFB button of earphone R twice
Volume up: Long press R side when music is playing
Volume down: Long press L side when music is playing
Reject call: Long press the button of L or R earphone for 3
seconds
Answer call: Short press button L or R earphone once
End call: Short press the button L or R earphone once
Redial last outgoing number: Quick press the button of L or
R earphone twice when music app is not playing
Activate iPhone Siri or Android Voice Assistant: Quick press
the button of L or R earphone 3 times
06
Main Button
Mic Loop LED Indicator
Led Indicator
Power Button
Micro usb
charging port
Button
Left Side Right Side
MicMain Button Left Side Right Side
4. Charging case
5. Perfect Fit
Button
First Time Use
1. Press button to open box
2. Take earbuds out and peel the film from the bottom of earbuds
and then put them back into case.
3. Take earbuds out and wait for them to pair with each other. After
successful pairing, one earphone will flash GREEN and RED quickly.
L
M S
4. Turn on Bluetooth function on the phone, scan and search
for "T1 Pods", click to connect.
Automatic re-connection to your phone
(Bluetooth function must be active on phone)
After first successful pairing between your device and the earbuds,
the next time you take any earphone or both out, it/they will
automatically on and connect back to your device (battery volume
of charging box should be active).
IMPORTANT: Remember to remove protective film
from the bottom of earbuds. Earbuds will not be
able to charge if this film is not removed.
Battery low reminding: when the battery is running low, you will
hear voice prompt “low battery, please charge” and the indicator
light flashes red fast.
Power on
When both earbuds are power off, long press each earbud for 3
seconds to power them on with voice prompt "power on". OR
take them out from charging case, they will power on
automatically.
Power Off
When music/audio pauses, long press R earbud for 5 seconds to
power it off with voice prompt "power off" and do same for L side.
OR put them into charging case, both earbuds will power off.
Charging the earbuds
Put both earbuds into the charging base. The indicator light will
be solid RED while charging and off after fully charged.
Note: when charging the earbuds, we need to put the earbuds at
the right position inside the charging case. Press and move the
earbuds if necessary until red light is on.
07
Change Mono Mode into Stereo Mode
Take one earphone from charging box, pair it with your phone,
it’s in mono mode now.
Take out another one, it will power on automatically and
connect with previous one. Now it’s in stereo mode. Simple
and easy!
Re-charging the charging case
When the charging case is low in voltage, please recharge. To
08
do this, simply insert the supplied micro USB cable into the
micro USB port on the back of the case, and connect the other
end into a USB main power source. Allow a couple of hours for
the case to recharge. The LED indicators will flash WHITE
while charging and will turn into solid WHITE after fully
charged.
Re-pair 2 earbuds
If 2 earbuds fail to pair with each other and they both flash
green and red, quick press both earbuds 2 times, they will
connect with each other and one is flashing green and red.
Now you can search “T1 Pods” on your phone and click to
connect.
09 10
4. Receive call, end call, reject call, redial
5. Activate Siri or Voice assistant
6. Ergonomic in-ear design for secure and comfortable fit
7. Nice sound with bass
Safety Instructions:
1. To avoid hearing damage, make sure that the volume on
music player is turned down before connecting your earbuds.
After placing earbuds in your ears, gradually turn up the
volume until you reach a comfortable listening level.
2. Avoid storage in high temperatures, such as in a hot vehicle
or in direct sunlight.
3. Do not expose the earbuds or any of its supplied parts to
rain or other liquids.
4. Do not drop or cause undue impact to the earbuds.
5. Do not use any dilutant or volatile liquid to clean the product.
6. Do not use headphones when it’s unsafe to do so—while
operating a vehicle, crossing streets, or during any activity or
in an environment where your full attention to your
surroundings is required.
7. Do not store other items in the case, as this may result in
contamination.
11
Contact Pin for Charging
Specifications:
Bluetooth version: 5.0 + EDR
Supported Profiles: HSP, HFP, A2DP, AVRCP
Frequency Response: 2.4-2.480GHz
Operation Distance: 10m obstacle-free
Talk Time: 6.0 hours
Music Time: 5.5 hours
Charing Time: 1.0 hours
Standby Time: 100 hours
Earbuds capacity: 50mAh for each earbud
Charging box capacity: 500mAh (charge the 2 earbuds for 3
times)
Weight and Size for Earbuds: 5g x 2, 24*16*25mm
Weight and Size for Charging box: 39g, 75*41*30mm
Features:
1. Dual channels (2 earphones can work independently, put
one into charging box, the other one still working)
2. Automatic power on and pairing with phone after taking out
from charging box
3. Volume up/down control, next/previous song control
Note: when the charging box is asleep, to know how much battery
capacity it remains just press the power button and the LED lights
on it will show you.
Twist in the ear canal forward or back to
lock in for your best fit, you will enjoy great
sounding music.
Peel the film
Functions of Main Button:
  • Page 1 1

Junesh T1 Pods User manual

Category
Headphones
Type
User manual

Junesh T1 Pods are true wireless earbuds with Bluetooth 5.0 connectivity, offering a stable and reliable connection within a 10-meter range. They feature a sleek and ergonomic in-ear design for a secure and comfortable fit, even during intense activities.

With a 5.5-hour music playtime on a single charge, you can enjoy your favorite tunes for hours on end. The charging case provides an additional 3 charges, extending the total playtime to an impressive 22 hours. The earbuds automatically turn on and pair with your device when taken out of the case, and seamlessly reconnect when put back in.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI