Groupe Brandt WFH1066K Owner's manual

Category
Washing machines
Type
Owner's manual
MANUEL D’INSTALLATION,
D’UTILISATION
ET D’ENTRETIEN ........................Page 2
HANDLEIDING VOOR
INSTALLATIE, GEBRUIK EN
ONDERHOUD ......................Bladzijde 22
INSTALLATIONS, BETJENINGS OG
VEDLIGEHOLDELSESVEJLEDNING
..............................................................Side 42
INSTALLATIONS-
GEBRAUCHS- UND
PFLEGEANLEITUNG
................Seite 62
INSTALLATION, OPERATION &
MAINTENANCE
INSTRUCTIONS
..........................Page 82
GB
D
DK
NL
F
LAVE-LINGE
WASAUTOMAAT
VASKEMASKINE
WASCHMASCHINE
WASHING MACHINE
82
GB
You will encounter the following symbols as your read these instructions. They mean:
Safety instructions (for you, for your machine or for your washing) which must be
carefully observed.
Electrical risk
Important information and instructions
Contents
Page
• Safety instructions ............................................................................................................ 83
• The environment and tips on saving energy ................................................................ 83
• Description of the machine ............................................................................................ 84
1 - How to install your machine for the first time
• Removing the transport clamps from your machine .................................................. 85
• Preparing to install your machine .................................................................................. 86
• Installation under a worktop .......................................................................................... 86
• Connecting the water supply .......................................................................................... 87
• Connecting to the drain .................................................................................................. 88
• Connecting to the electricity supply .............................................................................. 88
2 - How to operate your machine
• Preparing your washing (sorting, colour test, loads and checks) ............................ 89
•Loading the washing ...................................................................................................... 90
• Loading the washing products ...................................................................................... 90
• Programming / cancelling a programme .................................................................... 91 to 94
• Details of the functions .................................................................................................... 94 to 95
• Altering a washing programme ...................................................................................... 96
• Automatic safety systems .............................................................................................. 97
3 - General maintenance
• Cleaning the machine and the internal components .................................................. 98
• Risk of frost........................................................................................................................ 98
• Checking and replacing the hoses ................................................................................ 98
• Cleaning the products' box ............................................................................................ 98
• Cleaning the filters .......................................................................................................... 99
4 - Incidents that may arise
• The cycle does not start .................................................................................................. 100
• Heavy vibrations during spin .......................................................................................... 100
• The washing is not spun or is not spun enough ........................................................ 100
• A pool of water forms around the machine .................................................................. 100
• The machine does not drain .......................................................................................... 100
• The door does not open .................................................................................................. 100
• The machine refuses to accept a programme ............................................................ 100
5 - Particular messages provided by the indicator lights or on the display
• Problems that you can rectify yourself ........................................................................ 101
Before you start your machine, please read these instructions carefully. This will enable
you to familiarise yourself with its operation very quickly
83
GB
Safety instructions
To avoid damaging your machine and your
washing, your machine must only be used
for the purpose for which it has been
designed. Only use washing and
maintenance products certified as being
for use in domestic washing machines.
If you treat your washing with stain
removers, solvents and, in general, any
inflammable or potentially explosive
product, do not put them into the machine
immediately (see the section on
"TREATING STUBBORN STAINS").
Furthermore, you are strongly
recommended not to use solvents or
products in an aerosol can near to your
machine or, any electrical appliance in
general, in a poorly ventilated room (risk of
fire and explosion).
If an incident should occur, which you
cannot resolve using the remedies we
recommend (see the section on
"INCIDENTS THAT MAY ARISE"), call a
professional service engineer.
When making a new installation, the
machine must be connected to the water
supply with a new hose. The old hose must
not be re-used. Check the water and drain
hoses regularly: this will help you avoid
water damage.
Do not allow children to play with the
machine and keep pets away from it.
Worn-out machines must immediately be
rendered unusable. Unplug the power cable
and cut it off next to the machine. Shut
off the water supply and remove the hose.
Break the lock on the machine's door.
You must comply with the following instructions. We will refuse any liability and rescind
the guarantee if these recommendations are not observed, which can cause damage to
equipment or physical injury.
This machine is designed solely for domestic use, for washing, rinsing and spinning
machine-washable textiles.
The environment and tips on saving energy
Only programme a pre-wash when it is
absolutely necessary: e.g. for sportswear or
very dirty working clothes, etc.
If your washing is only slightly or moderately
dirty, a low temperature programme is quite
enough to provide you with a perfect result.
For only slightly dirty washing, select a short
washing cycle ("Rapid", "Express" or
"FLASH", depending on the model).
Use an amount of detergent to suit the
hardness of the water, the quantity of washing
and how dirty it is. Always follow the
instructions on the detergent pack.
Both the packaging and the component
parts of your machine use recyclable
materials. Please bear this in mind when
disposing of them.
Please contact your dealer or the technical
Services Department in your town regarding
how to dispose of them appropriately, in
an environmentally friendly manner.
84
GB
Door Opener
Description of the machine
Control panel
Detergent Dispensing Drawer
Drain pump access hatch
Button to open
the drain pump access hatch
Door
Water supply connection
Securing screw
Electrical power cable
Top
Fixing screw for the top of the machine
Adjustable feet
Drain hose
85
GB
C
C
C
C
C
YOU MUST PERFORM THE OPERATIONS DESCRIBED BELOW BEFORE
USING THE MACHINE
These operations consist of removing all the elements designed to immobilize your
machine's internal components while it is being transported.
These so-called "releasing" operations are required for your machine to operate properly
and to comply with the prevailing safety standards.
If you do not perform these operations completely, this can cause severe damage to your
machine while it is operating.
Removing the transport clamps from your machine
1 - Remove the transport clamps before you
start your machine. These are the screws
marked “C
(Figure1).
2 - Use a spanner to unscrew the “C” screws
anti-clockwise
(Fig. 2)
until you can
remove them by hand.
3 - Finish removing the “C” screws and their
rubber seals by pulling them towards you
(Fig. 3)
.
To facilitate this operation, pour a drop
of washing-up liquid on the screws and
release them a little at a time, working
from top to bottom.
4 -
You must block up the holes left by
the "C" screws with the covers provided
(in the accessories bag).
Your machine was scrupulously checked
before it left the factory: you may therefore
notice the presence of a small amount of
water in the drum or in the products' box.
We advise you to keep all the clamping
components because these must be re-
inserted if you subsequently have to
transport your machine.
Fig. 2
Fig. 3
Fig. 1
86
GB
Your machine's surroundings:
If you are installing your machine next
to another appliance or a unit, we
recommend that you always leave a gap
between them to help the air to circulate.
On the other hand, we would strongly
advise you NOT:
- To install your machine in a damp,
poorly ventilated room.
- To install your machine in a location
where it could be splashed with water.
- To install your machine on a carpeted
floor.
If you cannot avoid this, take every
precaution against obstructing the air
flow to the base of the machine to
ensure good ventilation for the
machine's internal components.
Levelling:
Use a spirit level to check that the floor is
horizontal: maximum slope: 2°, i.e. a
discrepancy of approximately 1cm over the
width and 1.5cm over the depth of the
machine.
Adjusting the feet:
To ensure that your machine operates safely
and quietly, its feet must be fitted. Your
machine is supplied with two adjustable feet.
If your machine is unstable,
- Unscrew the white plastic lock nut,
- Screw or unscrew the adjustable feet until
your machine is perfectly balanced,
- Once the feet have been set, tighten the
bolt to retain your setting.
Preparing to install your machine
Installation under a worktop
Fig. 4
Fig. 5
If you wish to install your washing machine
under a worktop, you must remove the top
of the machine
(Fig. 5)
:
Ensure that your machine is not
connected to the electricity supply.
Unscrew and remove the two screws holding
the top at the back of the machine
Pull the top gently towards you to release it and
then lift and remove it.
87
GB
Connecting your machine
Connecting to the cold water
supply
Connect the water hose
(Fig. 6)
:
- By screwing the elbowed end to the
connection on the back of the machine
- By screwing the other end to a tap fitted
with a threaded end piece diameter 20x27
(3/4 BSP).
If you use a self-piecing tap, the useful
opening must be at least 6mm in diameter.
To avoid any water leaks, remember to
fit the rubber seals in each end and
tighten your connections correctly. The
seals are provided in the accessories
bag.
Water supply:
-- Minimum water pressure: 0.1 MPa or 1 bar
- Maximum water pressure: 1 MPa or 10 bars
Fig. 6
Electricity supply
For your safety, you must comply with
the instructions below.
The electrical installation must comply with
Standard NF C 15-100, particularly as
regards the Earthing requirements.
Line 3x2.5 mm2 single-phase 230V connected
to :
- A single-phase 20A 230V-50Hz meter
- A differential circuit breaker and a separate
fuse (10 or 16A, depending on the model)
- A 2-pin + Earth 10/16A socket
We cannot be held responsible for any
accident caused by improper electrical
installation.
Advice on the electrical installation of your
machine:
• Do not use an extension lead, an adapter or
a multiple-outlet socket.
Never remove the Earth.
• The socket must be easily accessible but out
of the reach of children.
If in any doubt at all, please contact your
installer.
88
GB
Connecting your machine
Fig. 7
Fig. 8
Draining away the waste water
Connect the drain hose
(Fig. 7)
:
• Either, temporarily, to a sink or a bath tub
• Or, permanently, to a ventilated U bend.
If your installation does not have a ventilated
U bend, ensure that the connection is not
airtight. In fact, to avoid any flowback of the
waste water into the machine, you are
strongly recommended to leave an air gap
between the drain hose and the waste pipe.
The hose must not be twisted or kinked and
must be held by the hose hook to avoid it
falling to the ground
(Fig. 8).
The hose hook must be placed 40 to
100 cm above the base of the machine.
Ensure that it is tied firmly in place to
avoid it coming loose during draining
and causing a flood.
Your machine complies with European
Directives EEC/73/23 (Low Voltage Directive)
and EEC/89/336 (Electromagnetic
Compatibility) as modified by Directive
EEC/93/68.
89
GB
Sorting your washing
Please ensure that all your items are machine-washable. Please refer to the labels on your
items to select the most suitable programme . When washing a mixed load, use the programme
suitable for its most fragile items.
For new items, as a precaution, first of all check that they are colour-fast: see "Colour
test" below.
Preparing your washing
AVERAGE WEIGHT OF VARIOUS "THICK" DRY ITEMS
Average weight of various "thin" dry items
Single sheet ........................................400 to 500 g
Double sheet ..................................................800 g
Pillow slip ........................................................200 g
Light nightgown..............................................150 g
Child's cotton trousers ................................120 g
Adult's cotton trousers ................................500 g
Man's cotton/polyester shirt ........................200 g
Large cotton T-shirt ......................................150 g
Dish towel ........................................................100 g
Tablecloth ........................................................250 g
Delicate lingerie ................................................50 g
Children's synthetic woollens ........................50 g
Sock....................................................................20 g
Adult's cotton pyjamas ................................250 g
Adult jeans ..........................................800 g to 1 kg
Large towel ....................................................700 g
Small towel ......................................................300 g
Adult jogging trousers ..................................350 g
Child's towelling pyjamas ............................100 g
Bathrobe ........................................................1200 g
Sweatshirt ......................................................250 g
Duvet cover ..................................................1500 g
Checking your washing
Failure to observe the following
instructions can cause sever, and even
irremediable damage (damaged drum,
torn washing, etc.), and will rescind the
guarantee.
- Empty the pockets.
- Fasten any zips and press-studs.
- Remove the hooks from curtains or place
them in a net bag.
- Remove any loose buttons, pins, staples,
etc.
- Place small items of laundry (ribbons,
handkerchiefs, etc.) in a net bag.
- Turn multi-layer items inside out (sleeping
bags, anoraks, etc.).
- Turn any items with sewn-on decorations,
trousers and knitwear inside out.
Colour test
A coloured item frequently runs when it is
first washed unless it is guaranteed colour-
fast.
Before placing the item in your machine,
conduct the following test:
- Select an invisible area of the item
- Dampen it with warm water
- Then press it on a white cloth
If the item does not run, you can wash
it normally in your machine.
If the item runs, wash it separately in
your machine or by hand.
Do not exceed the following maximum loads:
COTTON / COLOUREDS / MIXED FIBRES:..............................................................................6 kg
SYNTHETICS
: ............................................................................................................................3 kg
DELOCATES
: ............................................................................................................................2 kg
WOOLLENS
: ............................................................................................................................1,5 kg
HAND-WASHABLE ITEMS
: ......................................................................................................1 kg
90
GB
Wash compartment (powder or liquid)
Pre-wash compartment (powder)
Softener
Siphon
Loading your washing
Proceed as follows:
Open the machine
• To access the drum, pres the "Door" button
located just above the door.
Insert your washing
For optimum washing performance, sort and
fold your washing and then place it the drum,
distributing it evenly, without piling it up. Mix
large and small items together for optimum
spinning.
Close the machine
Check that no item is caught in the door when
you close it.
Close the door by pressing it gently.
• Ensure that the door is locked. If it is not, a
safety system will prevent you from starting
your machine.
For your safety, the door is locked
throughout the washing cycle.
Dispensing the detergent
The amount of detergent to use depends on
the water hardness, how dirty the washing is
and how much washing there is.
Please refer to the dosage instructions on the
detergent pack.
Warning: The detergent manufacturers'
recommendations are generally based on filing
the drum to the maximum. Adapt the dosage
appropriately for the weight of washing you are
inserting in the machine.
These recommendations will avoid too high a
dose of detergent, which can cause foam. Too
much foam can reduce your machine's
performance and increase the washing time
and the water consumption.
Detergents for woollens and delicate textiles.
Detergents for woollens and delicate textiles.
You are recommended to sue an appropriate
detergent to wash these types of textiles (avoid
putting such detergents directly into the drum
because some of these products can attack
the metal.
Loading the washing products
You can place liquid or powder in the
"WASH" compartment but should never
use liquid detergent for programmes
WITH a Pre-wash and/or WITH "Delayed
Start" (depending on the model).
Concentrated softener must be diluted
with warm water.
To fill the compartments properly, open
the detergent dispensing drawer to its
maximum extent.
Never fill beyond the MAX level.
➀➁
Fig. 9
91
GB
Programming
Spin speed, Hold and Rinse, No spin
Remplacement
Delayed Start display
Cycle progress
Remplacement
Delayed
Start control
33
RR
55CC44
22
BB
All the buttons are sensitive. They do not stay pushed in. We recommend that you only use a brief press.
You should only press the "Start/Pause" button briefly unless cancelling a programme*,
in which case you should hold the button down.
(*) Details of this function in the following pages.
If one of the cycle progress lights is lit when you switch on, hold down "Cancel" before
you do anything else.
Warning: switching to the "Stop" position cannot cancel a programme.
BB
Start/Pause: short press
Cancel: long press
For more details of the various functions, please refer to the section on "DETAILS OF THE
FUNCTIONS".
Important: if you have stopped your machine during a washing cycle by selecting the "Stop"
position or after a power failure, when the machine is switched on again, the washing cycle
automatically returns to the point at which it was interrupted.
Stop, Type of items and Special programmes
Options: Pre-wash, Extra rinse, Anti-crease
11
Safety systems display: Tap closed, Foam detected, Child safety
Selection: Child safety, Current time
AA
92
GB
• Use the knob to select a programme(*)
Use the button :
- Either to alter the proposed spin speed,
- Or to select No spin ,
the cycle will finish by draining without a spin,
- Or to select Hold and Rinse ,
your machine will stop, with the drum full of water, before the final spin.
• Select an immediate start by briefly pressing "Start/ Pause"
The indicator light that is lit on constantly indicates how far your machine's
cycle has progressed.
• When the "Stop" light on is lit, the washing cycle is complete**.
BB
BB
55
100
22
11
Programming
Programming a washing cycle without options:
Programming a complete washing cycle:
Lights
• Use the knob to select a programme
(*)
.
Use button :
- Either to alter the proposed spin speed,
- Or to select No spin ,
the cycle will finish by draining without a spin,,
- Or to select Hold and Rinse ,
your machine will stop, with the drum full of water before the final spin.
• Select, if required, the " , ”Intensive” , ”Extra Rinse” "Anti-
crease" or options using button :
• Select an immediate start by briefly pressing "Start/ Pause" .
Or select a "Delayed Start" of 3, 6 or 9 hours with the button , Briefly
press "Start / Pause"
• During the "Delayed Start" period before the washing cycle effectively
starts, if you have selected 9h, the 9h indicator will be lit for the period
from 9h to 6h, then the 6h indicator will be lit for the period from 6h to 3h...
• The indicator light that is lit on constantly indicates how far your
machine's cycle has progressed.
• When the "Stop" light on is lit, the washing cycle is complete**.
BB
BB
55RR
55
33
100
22
11
On
shows the maximum spin
speed
that the selected textile can
withstand.
Spin speed light or "No spin" light
or "Hold and Rinse" light
+ the lights for the selected
options
+ the "Wash" cycle progress
light on
+ the light for the Delayed Start
selected on
Countdown of the Delayed Start
on
The progress light for the cycle
concerned on
The "Stop" light on
BB
BB
AA
AA
BB
100
22
Lights
On
shows the maximum spin
speed
that the selected textile
can withstand.
Spin speed light or "No spin" light
or "Hold and Rinse" light
+ the "Wash"
cycle progress
light on
The progress light for the cycle
concerned on
Cycle progress "Stop" light on
BB
BB
BB
100
22
(*) - Before starting your machine, check that the power cable is connected to the socket and that the water tap
is open. Also ensure that the machine's door is properly closed.
(**) - When the washing cycle is complete and the "Stop" light on is lit, you can reprogramme your machine.
If you press the "Start/Pause" button , the machine restarts
the last cycle it has performed, including the options.
- As a safety measure, once the cycle is complete, we would recommend that you unplug the power cable and
then shut the water tap.
55
BB
93
GB
Programming
• Briefly press the "Start/Pause" button to interrupt the cycle.
• Insert or remove the item(s)*.
• Briefly press the "Start/Pause" button to restart the cycle .
(*) It may take 1 or 2 minutes for the lid to unlock.
If you have selected a "Delayed Start" , you can access the drum
instantaneously at any time during the waiting period before the washing
cycle starts without having to interrupt and restart the cycle.
55
55
The "Pause" light is lit
The light , which was lit
before the pause, lights up
again.
BB
BB
Inserting or removing an item during the cycle (impossible during spin):
Cancelling during programming, washing or a pause:
• Hold down the "Start/Pause" button for at least 3 seconds.You can
do this at any time during the period before the cycle, during the cycle or even
during a pause.
If you have programmed a "Delayed Start" time and have cancelled
during the waiting period before the cycle effectively starts, all your
programming will be cancelled.If you only wish to cancel the "Delayed Start"
, turn knob to the left until the 3h, 6h and 9h lights go out.
RR
55
Return to initial display
display of the selected
programme.
For more details of the various functions, please refer to the section on "DETAILS OF THE
FUNCTIONS".
Important: if you have stopped your machine during a washing cycle by selecting the "Stop"
position or after a power failure, when the machine is switched on again, the washing cycle
automatically returns to the point at which it was interrupted.
Child safety:
Lights and/or display
• If you wish to protect your programme settings, use the "Child Safety"
system by simultaneously holding down for at least 3 seconds the following
buttons : "Pre-wash" and "Extra Rinse"
.
It is useless to press the "Start /Pause" button ag
ain
: once you
have selected "Child Safety" the controls and the options are locked
to avoid any erroneous operation.
• To alter your programming, you must deactivate the "Child Safety" system
, Proceed in the same way: simultaneously hold down for at least 3
seconds the following buttons: "Pre-wash" and "Extra Rinse" .
You can deactivate the "Child Safety" system at any time.
33
33
+ The light is lit
throughout the cycle until it is
complete
The light goes out
94
GB
Cotton
“”
For a wash load comprising white or hard-
wearing coloured COTTON.
If you are washing coloured cottons, do
not exceed the maximum washing
temperature of 60°.
During the first few minutes of the programme,
thanks to , your machine
automatically adapts the water and energy
consumption to provide perfect washing results.
SYNTHETICS
“”
For a wash load comprising DELICATE
COLOUREDS, HARD-WEARING SYNTHETICS
OR MIXED FIBRES.
Delicates
“”
For a wash load comprising NET CURTAINS,
DELICATE TEXTILES or FRAGILE ITEMS.
Woollens
“”
For a wash load comprising "MACHINE-
WASHABLE" WOOLLENS.
Hand-washable textiles
“”
For a wash load comprising SILK OR
ESPECIALLY DELICATE TEXTILES.
Flash 30’
This programme enables you to refresh a slightly dirty
3kg-load of laundry consisting of WHITE COTTON,
COLOURED COTTON or HARD-WEARING
SYNTHETICS.
The programme is limited to 30 minutes.
During this programme, the temperature is
automatically set to 40°C.
The doses of detergent must be reduced by
half for this programme.
Tempefature
(°C)
Max. load
(kg)
Pre-wash
Extra rinse
No Spin
Hold and
RInse
Programmes' table
1,5
1,0
30°
Type of textile
Depending
on
the textile
COTTON
30
- 90°
Cold
- 40°
30° 3,0
6,0
Flash 30’
2,0
Cold
- 40°
Cold
- 60°
3,0SYNTHETICS
DELICATES
WOOLLENS
HAND-WASHABLE TEXTILES
RINSE ONLY
SPIN ONLY, DRAIN
: These options can be performed with the maximum load for the textile concerned
: These functions can be used individually or combined - illogical combinations are impossible
Individual programmes
Special programmes
To select the most suitable programme for your type of washing, follow the instructions on the
labels attached to most textiles.
Programming
100
Details of the functions
95
GB
Details of the functions
Rinse only
“”
A separate rinse, followed by:
- Either a spin and drain
- Or drain only ("No Spin" option)
- Or a Hold and Rinse.
Spin only
“”
This provides a separate spin and drain.
In the case of a "Rinse only" followed by a spin
or a "Spin only", ensure that you select the
spin speed suitable for the type of items in
your machine.
Options
Pre-wash “
Specially designed for heavily soiled washing
(mud, blood, etc.).
An initial specific agitation in cold water
precedes the washing phase. This enables the
particles soiling the washing to be removed
before the water is heated.
You must place some detergent in the ”
compartment in the products' box.
Extra rinse “
"Especially for sensitive and allergic skins": this
adds an extra rinse to the washing cycle.
Anti-crease
This helps you with ironing your washing.
This option enables you to wash and spin your
washing more gently, without loss of washing
performance.
Hold and Rinse
This function is for use with textiles that you
do not wish to spin or if you envisage being away
fro a long time after washing is complete.
Once this function is selected, the cycle is
interrupted before the final spin to enable your
washing to soak in the water to avoid creasing.
When the machine is stopped with the
drum full of water, the "Hold and Rinse"
indicator light flashes and the "Pause"
cycle
progress light illuminates until you
programme the end of the cycle..
Then:
- Either you wish to drain and spin.
-Set the knob to “Spin" and use the
button , to select a suitable
spin speed for the type of items; then press
the "Start/Pause"
, The "Pause" light on
goes out, the "Spin" light on and the
programme finishes automatically.
- Or you wish to drain only.
Press the "Start/Pause" button
The
"Pause" light on goes out. The "Spin" light
on illuminates and the programme finishes
automatically.
Delayed Start
You can delay the start of your programme
by 3, 6 or 9 hours to benefit from off-peak
electricity tariffs or to have the cycle finish
when you wish.
To do this, use the knob to select the "Delayed
Start" you wish.
During the whole of the "Delayed Start"
period before the washing cycle effectively
starts, the light selected remains lit for 3
hours, for example, if you have selected 9h,
this indicator light will remain lit for the
period from 9h to 6h then, at the sixth hour,
the 6h indicator light will light for the period
from 6h to 3h and, at the third hour, the 3h
indicator light will light for the period from
3h to the time the cycle effectively starts
RR
BB
BB
55
BBBB
55
22
11
96
GB
Altering a washing programme
During programming :
Any alteration is possible before you press the
"Start/Pause" button
.
After the start of the cycle:
• You cannot alter the type of textile (for instance,
switch from "COTTON" to "SYNTHETICS" or
from "SYNTHETICS" to "DELICATES" etc.).
To change the type of textile during a cycle,
you must cancel the current programme and
then programme a new cycle.
• You can alter the temperature at the start of
the washing phase, after putting the machine
in "Pause" mode.
• You can alter the spin speed during the whole
of the cycle before spinning commences.
• You can select "No Spin" 100 and "Hold and
Rinse"
up to the end of the rinsing phase
(until the "Rinse"
cycle progress light goes
out).
• You can modify your selected "Delayed Start"
throughout the whole of the waiting period
before the cycle effectively starts.
If you wish to cancel the "Delayed finish"
, time during this period, turn the knob
anti-clockwise until the time shown on the
display can reduce no further (the time
displayed therefore corresponds to the
finishing time for your programme) and then
briefly press the .
The cycle will start immediately
• When you have selected a "Delayed Start”, you
can only activate the "Pre-wash"
and
” (anti-creasing) options
during the period before the cycle effectively
starts.
You can activate the "Extra rinse" until rinsing
starts (until the "Rinse" cycle progress light
illuminates).
• You can switch of any of the options throughout
the cycle, provided that the relevant action has
not already started.
At the end of the cycle:
When the "Stop" light is lit:
-
You can programme a new cycle without
having to switch to the "Stop" position on the
knob . All you have to do is press any of the
buttons , , , or turn the knobs or .
The machine is then ready for a new
programme.
- If you press the "Start/Pause" , button
directly after the end of the cycle, the machine
restarts the last cycle programmed, including
any options.
55
RR
11
4433
22
11
BB
55
AA
55
97
GB
Door safety lock:
As soon as the washing cycle starts, the door
on your machine locks.
Once the cycle is complete and when the
machine is stopped with the drum full of
water, the door unlocks immediately.
If you have programmed a "starts", ,the
door is unlocked throughout the waiting
period before the cycle effectively starts.
If you wish to open the door during a cycle,
briefly press the "Start/Pause" button
and wait a moment or two for the door safety
system to unlock.
Depending on exactly when in the cycle
you wish to open the door, the time delay
may be longer because a cooling-down
period must be added.
In fact, during the cycle, for the door safety
lock to release, the temperature must not
be higher than 60°C, so that you do not
risk receiving being scalded or burnt.
.
Water safety system:
While your machine is operating, constant
control of the water level avoids any water
overflowing.
Load Balancing system:
Your washing machine is fitted with a safety
system to limit spinning when it detects a
poorly distributed load (this poor distribution
is called an "imbalance"). In this case, your
washing may not be adequately spun. You
should therefore redistribute it evenly in the
drum and programme a new spin.
Anti-foam safety system:
You washing machine can detect too high a
production of foam and the light
illuminates during spinning.
At such times, the spin stops and the machine
drains.
Then the cycle continues, adapting the spin
sequences and possibly adding an extra rinse.
The finishing time is altered.
During subsequent washes, reduce the
amounts of detergent you use.
Tap closed
When the "Tap closed" light
is lit, this
means that the water supply to your machine
is blocked:
- Check whether the water tap is open
correctly,
- Check whether the water hose is bent or
kinked.
55
Automatic safety systems
Programme for standardised comparative testing
Programme ..................................................................................................................COTTON
Temperature........................................................................................................................60°C
Load ......................................................................................................................................6 kg
Duration..............................................................................................................................1 h 55
Energy ..........................................................................................................................1,02 kWh
Water ......................................................................................................................................45 l
To comply with the statement on the energy label, the tests are conducted in accordance with European Directive 92/75/EEC,
with a nominal capacity ensuring that all the CEI detergent is used as soon as the washing phase starts.
Cleaning the machine
To clean the casing, the control panel
and all the plastic components in
general, use a sponge or a cloth
dampened only with water and liquid
soap.
Never use:
• Abrasive powders
• Plastic or metal sponges
• Alcohol-based products (alcohol, thinner,
etc.)
Maintaining the internal
components
To ensure optimum hygiene, we recommend
that you:
• Leave the door open for a short time after
the wash, (ensure that your children and pets
cannot get into the machine)
•Clean the plastic and rubber components
providing access to the inside approximately
once a month with a slightly chlorinated
cleaning product.
To eliminate any residual traces of this
product, programme a rinse.
• Run a 90°C washing cycle at least once a
month.
Risk of frost
If there is a risk of frost, disconnect the water
hose and empty any water in the drain hose
by placing it as low as possible in a basin.
Periodic checks
We recommend that you check the condition
of the water and drain hoses. If you notice the
slightest cracking, do not hesitate to replace
them with identical hoses available from the
manufacturer or his After-Sales Service.
Replacing the water hose
When replacing this, ensure that the
connections are tight and that there is a rubber
seal at both ends.
98
GB
Cleaning the detergent dispensing
drawer
To clean the products' box, pull it towards you
and then remove it from its housing by pressing
on the point indicated on the siphon (the
coloured component). Rinse the box in water
and also clean its housing before replacing it.
Cleaning the siphon
Wash the siphon (the coloured component
in the products' box) every 30 to 40 doses of
detergent. Remove the siphon by holding it
by the edges. To avoid the siphon becoming
blocked, rinse any residual softener away
carefully and ensure that it is refitted perfectly
in place before using the machine.
Fig. 10
Fig. 11
General maintenance
Replacing the power cable
For your own safety, this operation must be
performed by the manufacturer's After-Sales
Service or by a qualified electrician.
99
GB
Cleaning the pump filter
This filter collects any small items that you
may have inadvertently left in the clothes and
prevents them from disrupting the pump's
operation.
To clean it, proceed as follows:
When the drum is full (for example, if
there is a power cut), there can be up
to 15 litres of water that must be drained
away: provide a large enough
receptacle.
Take precautions, the water to be
drained may still be scalding hot.
- Remove your machine's power cable from
the socket.
- Open the access hatch by pressing on the
button (Fig. 12).
- Tilt the chute in front of the filter towards
your receptacle,
- To control the flow of water coming out,
slightly unscrew the filter by turning it anti-
clockwise,
- If your receptacle becomes full before you
have drained the machine completely,
screw in the filter, empty your receptacle
and then start again until there is no more
water,
- Then open the filter by turning it anti-
clockwise and empty the small amount of
water from the filter's lid (30ml maximum).
- Remove any residue left in the filter's
housing,
- Clean the filter,
- Replace the filter in its housing and lock it
in place by turning it clockwise.
- Refit the chute
- Close the filter access hatch.
Ensure that the filter is correctly
repositioned to avoid any water leaks.
Cleaning the filters
Cleaning the filters on the water
supply
The filters at the point where the water hose
is connected to your machine and to the tap
prevent dirt and small objects entering your
machine. We recommend that you clean
them from time to time.
Proceed as follows to clean them:
- First of all, close the water tap,
- Unscrew the part of the hose that is
connected to the back of your machine,
- Remove the filter from the back of your
machine using a pair of pliers and wash it
under the tap,
- Refit the filter and the hose,
- Unscrew the hose connected to the water
tap,
- Remove the filter with your hands and clean
it under the tap
- Refit the filter and the hose,
Fig. 12
100
GB
Incidents that may arise
Incidents
The cycle does not start
Heavy vibrations during
spinning
The washing has not been
spun or has not been spun
enough
A pool of water forms
around the machine
The machine does not drain
The door will not open
The machine refuses to
accept the programme
Possible causes / remedies
You have forgotten to press the "Start/Pause" button .
• There is no electricity to the machine:
- Check that the plug is correctly connected.
- Check the circuit breaker and the fuses.
• The water tap is closed.
• The machine's door is not closed properly.
• The transport clamps have not been correctly removed from
your machine:- See the section on "REMOVING THE
TRANSPORT CLAMPS FROM YOUR MACHINE"
• The floor is not horizontal.
• The feet are wrongly adjusted or their nuts have come loose.
• You have selected a programme without a spin, for example:
"No spin".
• The spin safety system has detected that the washing is poorly
distributed in the drum:- Redistribute the items better and
programme a new spin.
First of all remove the plug from the socket or remove
the relevant fuse and close the water tap.
While your machine is operating, constant control of the water
level avoids any water overflowing. If, despite this, water is
leaking from the machine, it may be that:
• The drain hose hook is poorly positioned in the drain pipe.
• The connections for the water hose on the machine and at
the tap are not tight:- Check that the seals are in place and
that the connections are tight.
• You have programmed a "Hold and RInse".
• The pump filter is blocked:- Clean it (see the section on
"CLEANING THE FILTERS" for how to do this).
• The drain hose is kinked or squashed
• The programme has not finished yet.The door remains locked
throughout the whole of the programme.
• The "Child safety" system is active, (see the section on
"PROGRAMMING")
• You have interrupted a cycle while it is running. Cancel it (see
the section on "PROGRAMMING")
Some incidents may occur while you are using your machine; these are the points to check.
In general, whenever you notice an anomaly, it is advisable to stop the machine, unplug
the power cable and close the water tap.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21

Groupe Brandt WFH1066K Owner's manual

Category
Washing machines
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI