Brandt WTE1573D Owner's manual
- Category
- Washing machines
- Type
- Owner's manual
This manual is also suitable for
FR GUIDE D’INSTALLATION & D’UTILISATION
EN INSTRUCTIONS FOR USE
NL HANDLEIDING VOOR HET INSTALLEREN EN HET GEBRUIK
Lave-Linge
Washing machine
Wasmachine
2
FR Page 3
Page 15
Pagina 27
EN
NL
Important :
Avant de mettre votre appareil en route, veuillez lire attentivement ce guide
d’installation et d’utilisation afin de vous familiariser plus rapidement avec
son fonctionnement
Dans le souci d’une amélioration constante de nos produits, nous nous
réservons le droit d’apporter à leurs caractéristiques techniques,
fonctionnelles ou esthétiques toutes modifications liées à leur évolution.
Warning :
Before installing and using your appliance, please carefully read this Guide
to Installation and Use, which will allow you to quickly familiarise yourself
with its operation.
As part of our commitment to constantly improving our products, we reserve
the right to make changes to them based on technical advances to their
technical and functional features and appearance.
Belangrijk:
Vóór installatie en gebruik van uw apparaat deze installatie- en
gebruiksgids aandachtig lezen. U zult snel gewend raken aan de werking.
Wij streven voortdurend naar verbetering van onze producten. Daarom behouden
we ons het recht voor om aan de technische, functionele of esthetische
kenmerken van onze producten wijzigingen aan te brengen die in verband staan
met technische ontwikkelingen.
15
EN
Dear Customer,
You have just acquired a BRANDT washing machine and we would like to thank you.
We have invested all our dedication and know-how in this appliance so that it would best meet
your needs. With innovation and performance, we designed it to be always easy to use.
In the BRANDT product range, you will also find a wide choice of ovens, microwaves, cooking
hobs, ventilation hoods, cookers, dishwashers, driers, fridges and freezers, that you can
coordinate with your new BRANDT washing machine.
Visit our website www.brandt.com where you will find all of our products, as well as useful and
complementary information.
BRANDT
This machine is only designed for domestic use and to wash, rinse, spin and, depending on the model,
dry machine-washable textiles.
In this manual, you will find the instructions
required for the safety, installation and use of
your machine and the relevant guarantees.
Please keep these and pass them on if you
sell the machine.
•
Dispose of the packaging and of your worn-
out machine (after rendering it unusable by
removing the hoses, cutting the power
cable and breaking the lock on the lid) in
accordance with the prevailing regulations.
•
For a new installation, the machine must be
connected to the water supply with a new
hose: the old hose must not be re-used.
•
Do not let children play with the machine or
the cleaning and maintenance products
(water unsuitable for drinking, ingestion of
the products, risk of physical harm, etc.).
Keep pets away from the machine.
•
Protect your property and your machine by
checking the condition of the hoses
regularly. Never use solvents, inflammable
products, explosive products or aerosols
near to or in your machine. Use the machine
in a well-ventilated, frost-free area and do
not use an extension lead or a multiple
adapter.
•
Switch off the power supply to your
machine after use.
•
If your machine should break down, call a
qualified washing machine engineer.
•
Only use your machine in accordance with
the instructions in this manual. Only use
washing and maintenance products
approved for domestic machines.
For washer-dryers:
•
Before drying, remove the detergent
dispensers placed in the drum with your
washing. Their plastic material cannot
withstand the drying temperatures.
Contents
Safety advice
Safety instructions (for your machine
and your washing), which must be
observed
An electrical risk,
Important advice and information
Safety /environment and savings ..............15 - 16
Releasing, moving and levelling ................16 - 17
Connecting to the cold water supply ................17
Draining away the waste water ..........................17
Connecting to the electricity supply..................17
Sorting and checking your washing ..................17
Access to the machine’s drum ..........................18
Inserting your washing ........................................18
Closing the drum ..................................................18
Textile care codes ................................................18
Cleaning products ................................................18
Programming..................................................19 - 21
Details of the functions and the options............21
Changing a programme ......................................23
Automatic safety systems ..................................23
EEC/95/12 programme – characteristics..........23
Running maintenance / messages
......24
Cleaning the pump and drying filters ................24
Incidents that may occur......................................25
Automatic fault diagnostics ................................26
16
EN
4
➀➁
1 2
➀
➀
➁
➁
➂
➂
➃
➃
➄
•
Fill your machine to the maximum. You
thereby optimise your water and electricity
consumption.
•
Only programme a pre-wash when
absolutely necessary: e.g. for heavily soiled
sports or working clothes, etc.
•
A programme with no pre-wash is sufficient
for slightly or moderately soiled clothes.
•
For slightly soiled clothes, select a short
washing cycle (or an «Express» cycle,
depending on the model).
•
Gauge the amount of detergent according
to the water hardness, the degree of soiling
and the amount of washing. Always follow
the manufacturer’s instructions on the
detergent packets.
For washer-dryers:
•
If you spin at high speed, little dampness
will remain and you will therefore consume
little electricity. Even synthetic textiles can
be spun before drying.
•
Choosing your drying time well also helps to
save water and electricity.
•
Avoid wasting water and electricity by not
over-drying your laundry.
Environment and savings
THE FOLLOWING OPERATIONS MUST BE
PERFORMED BEFORE YOU USE THE
MACHINE. Figs 1 & 2
First of all remove the piece of expanded
polystyrene from under the lid. (Keep the
transport material: you will need it if you move).
Rear transport clamp Fig. 1 ➀ to ➃
➀ Unscrew the 6 screws using a No. 10 tube
spanner or a straight-edged screwdriver.
➁ Remove the clamp.
➂ Free the power cable from the plastic
holder clipping it to the transport clamp.
➃ Plug the holes left by the clamp using the
plugs supplied and re-screw the 4 external
screws into the casing.
Rear transport clamp Fig. 2 ➀ to ➄
➀ Unclip the plinth by pressing simultaneously
on the side knobs and pulling them towards
you.
➁ Unscrew the screw holding the red plastic
«front» clamp.
➂ Remove the front clamp.
➃ Plug the hole left by the clamp with the
remaining plug.
➄ Clip the plinth on again.
Releasing your machine
17
EN
3
0,80 m. min.
1,10 m. max.
230 V - 50 Hz - 10 A.
1 ➞ 10 kg/cm
2
10 ➞ 100 N/cm
2
Preparing your washing
Connecting your machine
Failure to observe the following advice
can cause severe and even irremediable
damage (damage to the drum, torn
washing, etc.) and rescinds the guarantee.
Sorting your washing
•Ensure that all your washing is machine-
washable: check the labels on your washing
(type, temperature, type of cleaning, etc.).
•Ensure that your coloureds do not run.
•When washing a mixed load, use the
washing programme for the most delicate
textiles in the mix.
Checking your washing
•Empty the pockets and close any zips and
press-studs.
•Remove any curtain hooks or place your
curtains and any small items of laundry
(ribbons, handkerchiefs, etc.) in a net bag.
Button up pillowcases, etc.
•Remove any poorly attached buttons, pins
and hooks.
Setting on castors, moving
To move your machine, unclip and slide the
castor release handle from right to left.
Your machine must not still be on its
castors when in operation.
Check that it is plumb and stable to avoid
vibration during spinning.
Levelling Fig. 4 ➀ ➁
- Set your machine on its castors.
- Unscrew the two screws with a straight-
edged screwdriver.
- Level the machine by adjusting the two feet
using a flat spanner or a pair of pliers.
- Set the machine back on the floor by sliding
the castor release lever to check the
chocking.
- If the machine is correctly level, retighten the
two locking screws.
To align your machine with your units, you can
break off the fixing hooks for the hoses.
Take care not to squash the hoses!
If you cannot avoid installing the machine on a
carpeted floor, adjust the feet so as to leave a
large gap for ventilation.
Moving and levelling
Connecting to the cold water supply (Fig. 3)
Your washing machine can be connected to
any cold water pipe. Connect the supply hose
provided to a threaded 20x27 Ø tap (3/4 BSP)
not forgetting to insert the seal supplied
(depending on the model, the hose may
already be fitted with a seal).
Water pressure may vary from 10 to 100
N/cm
2
(1 – 10 bars).
Draining away the waste water (Fig. 3)
NB: Ensure that the drain hose is tied firmly in
place with cord, etc. to avoid a possible flood.
In all cases, the height of the drain hose
bracket must be between 0.80m minimum and
1.10m maximum above the floor. The hose
must be fastened to avoid it breaking and its
opening must be above the surface of the
water being drained away.
Connecting to the electrical supply (Fig. 3)
Please refer to the «Characteristics» section.
The socket must be easily accessible but out
of children’s reach.
The installation must conform to the country’s
regulations, in particular as regards earthing
requirements and installation in shower-
rooms. The machine must be earthed.
Never use an extension lead or a multiple
adapter for connecting to the socket.
* We cannot be held responsible for any
incident caused by poor earthing of the
machine or poor electrical installation.
The machine must be switched off (in the
«Stop» position) when connecting to the
electrical supply.
Replacing the power cable:
For your safety, the power cable and,
depending on the model, the complete
electric box and its associated cable must
only be replaced by the manufacturer’s After-
Sales Service or a qualified electrician.
18
EN
5 6
➃
➂
➁
➀
➀➁➂➃
Washing productsPreparing your washing
Textile maintenance codes:
Do not exceed the indicated temperature.
Cold diluted bleach can be used.
Ironing:
•
cold
••
medium
•••
hot..
Dry cleaning.
Do not use.
Heavy drying in a domestic machine.
Gentle drying in a domestic machine.
F
95
Access to the machine’s drum (Figs. 5 - 6)
•
Proceed as follows:
•Check that the machine is switched off.
•Open the machine’s door (FIG. 5).
•Press the button on the front flap. (FIG. 6 ➀➁)
Loading your washing
•For optimum washing performance, place
the previously sorted and folded washing in
the drum, distributing it evenly without
heaping it up. Mix large and small items to
obtain optimum spin-drying without
unbalancing.
•Check that no items have fallen down the
side the drum.
Closing the drum
•Close the drum using both hands, ensuring
that the button returns to the correct position.
The coloured section must be visible (Fig. 6
➂ ➃).
CHECK THAT NO WASHING IS CAUGHT
BETWEEN THE TWO FLAPS.
Filling the products’ containers
➀
Pre-wash container (powder )
➁
Wash container (powder or liquid )
The «WASH» container may contain either
powder or liquid but liquid detergents
should not be used with programmes WITH
pre-wash.
➂
Bleach: bleach can be used as a
disinfecting or bleaching agent. Concentrated
bleach must be diluted.
➃
Softener: Concentrated softener
should be diluted with warm water.
Loading the washing products
Follow the dosage instructions on the pack.
Warning: these are generally recommended
for a full load of washing. Adapt the amounts
to suit the condition of your washing.
Too much detergent can cause foam. An
excessive amount of foam reduces your
machine’s performance and increases the
washing time and water consumption.
Do not forget to reduce the amounts when
using concentrated detergents. See the
instructions on the pack.
Reduce the product amounts by 10%
When the water is soft, when your washing is
only slightly soiled and there is only a small
amount. When the washing programme is
short.
Detergents for woollens and delicate
fabrics
Use an appropriate detergent for washing
these textiles (avoid putting the detergent
directly into the drum because some of these
products can attack the metal).
cl
19
EN
Apart from the «On/Off» button, all the buttons are sensitive and therefore do not remain depressed.
During programming, all the buttons except for «Start/Pause» can be kept depressed but, for
more precise adjustment, we recommend that you operate them with a series of brief presses.
You should operate the «Start/Pause» by pressing it briefly except when cancelling the
programme or re-initialising the cycle counter, in which case it should be kept depressed.
(*) Details of the functions are provided in the following pages.
If one of the cycle progress lights is lit when you switch on, cancel before carrying out any
other operation.
Warning: the «
On/Off
» button cannot cancel a programme.
B
Programming
Selector for the spin speed,
delayed start and remaining time functions
Spin speed
and delayed start
Start/Pause: press briefly
Cancel: long press
Easy ironing, Eco, Intensive wash options
Pre-wash, extra rinse options
On/Off
Cycle progress
Display
Type of washing and temperature
2
R 3 4 5
AB1
I / O
•
Press in the «On/Off» button (1)
.
•
Turn the selector to select the programme and the washing
temperature. The machine proposes the recommended spin
speed for the type of textile selected.
•
Use the setting button
:
-
Either to alter the proposed spin speed.
-
Or to select drip dry.
The cycle will finish with a gentle spin at 100 rpm
-
Or to select stopping with the drum full of water.
The machine will stop with the drum full of water before the final spin.
•
Use button to select the «Pre-wash» and/or «Extra Rinse»
options, if required
•
Use button to select the «Easy ironing» and/or «Eco» and
«Intensive wash» options, if required.
•
Select immediate start by pressing the «Start/Pause» button
...
2
5
4
R
1
I / O
Light
+
spin speed
recommended on
Light
+
e.g.:
or
or
Lights
and options chosen
+
programme end selected
on
Lights and
+
display of washing time
remaining
A
A
A
Programming a washing cycle:
Lights and/or display
20
EN
• ...
Or select a start delayed by 1 - 19 hours by using button to
select this option and then using button to set the period of
the delay
•
At the end of the cycle, the display shows «
-0-
»
.
Release the «On/Off» button and wait 1-2 minutes for the
safety device to unlock the lid (2).
To aid access to your washing, the opening to the drum is
automatically positioned at the top.
I / O
R
3
Light
+
display of time remaining
before the cycle starts
A
Programming a washing cycle:
Voyants et/ou afficheur
Programming
(1) -
Before starting your machine, check that the power cable is plugged in and the water
tap is open. Also ensure that the drum doors and the lid are firmly closed
(2) -
It is advisable, as a safety measure, to unplug the power cable and turn off the water
tap.
For more information, please refer to the section on «DETAILS OF THE FUNCTIONS».
Important: If you have stopped your machine by pressing the «On/Off» button or after a power
failure, when the power is restored the washing cycle automatically returns to the point at which
it was interrupted.
•
Press the «Start/Pause» button to interrupt the cycle
.
•
Add or remove the items of laundry
.
•
Press the «Start/Pause» button to restart the cycle.
(*) The lid may take 1-2 minutes to unlock
If you have selected a «Delayed Start», you can instantaneously
access the drum at any time during the phase before the washing
cycle starts, without having to interrupt and restart the cycle.
2
2
Flashing light
+
counter stopped
Light permanently lit
+
counter restarts
A
B
A
B
Adding or removing an item during the cycle (impossible during spin):
Maintaining your washing machine’s performance:
•
When the message ”Filt” appears at the end of the cycle, you
must ensure that the pump filter is clean (see the section on
”CLEANING THE PUMP FILTER”).
This message disappears when you programme a new cycle.
Cancelling during programming or washing or during a pause:
•
Hold down the «Start/Pause» button for at least 1 second.
This can be done at any time during the cycle or during
programming, or even during a pause.
If you do this while the machine is waiting to start during a delayed
start, only the delayed start is cancelled.
2
Return to initial display
21
EN
Programmes table
Type of fabric
Max. load
(kg)
Temperature
(°C)
Prewash
Rinse plus
Eco
Intensive
Drip-dry
Full drum stop
COTTON / WHITES
COLOUREDS / SYNTHETICS
WOOLLENS
HAND-WASHABLE FABRICS
------
RINSE only
SPIN only
Additional programmes
Special programmes
1,5
1,0
●●●
●●●
Easy ironing
- 90°
30°- 60°
40°
40°
3,0
6,0
●●●●●● ●
●●●●●● ●
●●●
●●
●
●
●
3,0
- 30°
3,0
Flash 30’
●
:
These functions can be used alone or in combinations: illogical combinations are impossible.
To select the most suitable programme for your type of washing, follow the instructions on the labels
attached to most items.
COTTON / WHITES
If your washing comprises hard-wearing white
COTTONS or COLOUREDS
When washing coloureds do not exceed
a maximum temperature of 60°C.
During the first few minutes of this
programme, your machine automatically
calculates the best programme to run for a
perfect wash.
This 40°C programme enables you to wash a
usual 3 kg load of cottons and mixed textiles
in 45 minutes, while ensuring perfect washing
results and maximum energy savings.
COLOUREDS /SYNTHETICS
For a wash load consisting of DELICATE
COLOUREDS, HARD-WEARING SYNTHETICS
or MIXED FIBRES.
BABYWEAR – WOOL
If your washing comprises WOOLLENS or
MACHINE-WASHABLE WOOLLENS.
HAND-WASHABLE TEXTILES
If your washing comprises SILK or
PARTICULARLY DELICATE FABRICS
FLASH 30’
This programme enables you to refresh a
small load of 3 kg of lightly soiled washing
composed of WHITE or COLOURED
COTTONS or HARD-WEARING SYNTHETICS.
The cycle time is restricted to around 30
minutes.
In this programme, the washing temperature
is automatically programmed to 40°C.
For this programme, the doses of
detergent should be reduced by half.
Details of the functions
Programming
22
EN
RINSE ONLY
A separate rinse followed by a choice of:
- Either spin and drain
- Or drain only («Drip-dry» option)
- Or a stop with the drum full of water.
SPIN ONLY
This allows a separate spin and drain.
In the case of «Rinse only» followed by a spin
or of «Spin only», take care to select a
suitable spin speed for the type of washing
in the machine.
Prewash
Specially designed for heavily soiled washing
(mud, blood, etc.).
Detergent must be placed in the « »
container in the products’ box.
Rinse plus
«Especially for sensitive and allergic skin»:
adds an extra rinse to the washing cycle.
Easy ironing
Makes you washing easier to iron.
This option allows you to wash and spin your
washing more gently without any loss of
performance.
Eco
The «Eco» function provides you with perfect
washing results while saving on energy. It
reduces the washing temperature and
increases the agitation period.
Intensive wash
This function improves washing performance
and handles reputedly stubborn stains by
automatically increasing the temperature in
the drum and the agitation time.
Delayed start
You can delay the start of your programme by
1 to 19 hours to take advantage of off-peak
rates or finish the cycle at a particular time.
To do this, press button and select
function « » (delayed start). Then press
button land select the cycle starting time.
While the machine is waiting to start,
display shows the time remaining before
the cycle effectively starts.
Remaining time
During programming, you can find out the
length of the selected cycle by pressing
button and selecting function « »
(remaining time).
If you select the «time remaining» function
while the machine is waiting to start in
«Delayed Start» mode, it is the selected
programme’s time that is permanently
displayed.
(*) The time indicated by the machine at the
start of the programme may vary during the
course of the cycle:
- If you change the washing temperature
(even during a spin) or if you add or cancel
options, the time will be recalculated and
updated on the display.
- Certain operating variables (for instance:
detection of imbalance or foam, etc.) can
also alter the cycle’s duration.
- If there is a power failure during washing,
when the power is restored, the time
displayed may be less than the actual
remaining time. This time will be updated at
the start of the rinsing phase.
Full drum stop
This is used for textiles that you do not wish
to spin or if you envisage being absent for a
long time after the washing is finished.
When this function is selected, the cycle
interrupts before the final spin, enabling your
washing to soak in the water to avoid
creasing.
When the machine stops with the drum full
of water, display does not count off the
time remaining but remains fixed (including
the point) and cycle progress light «
»
flashes.
Then:
- You either wish to drain and spin.
In which case, select the Spin function « »
using button then use button to set a
suitable spin speed for your type of washing.
The programme will shut down automatically.
- Or you just wish to drain.
In which case, select the Spin function « »
and then use button to display
(«Drip-dry» function).
R
R
3
A
3
A
R
3
Details of the functions (continued)
Details of the options
23
EN
Your machine complies with European Directives EEC/73/23 (Low Voltage Directive) and EEC/89/336
(Electromagnetic Compatibility), as modified by Directive EEC/93/68.
Lid opening safety system:
As soon as washing commences, the lid on
your machine is locked.
When the cycle is finished or when the machine
has stopped with the drum full of water, the lid
unlocks.
If you have programmed a «Delayed start», the
lid is not locked until the waiting period is over
and the cycle starts.
If you wish to open the lid during the cycle,
press button « » briefly and wait 1-2
minutes for the safety system to unlock the lid.
Water safety system:
The water is constantly controlled when the
machine is operating to prevent any possible
overflow.
Spin safety system:
Your washing machine is fitted with a safety
system that restricts the spin when poor load
distribution is detected.
In this case, your washing may be
insufficiently spun. Redistribute your washing
in the drum and programme a new spin.
Anti-foam system:
You machine can detect when too much foam
is being produced during spinning.
At such times, spinning stops and the
machine drains.
The cycle then restarts, adapting the spin
rates and possibly adding an extra rinse.
2
During programming:
You can alter anything before you press the
«Start / Pause» button « ».
After the cycle starts:
• You cannot alter the type of textile (for
example, change from «COTTON» to
«SYNTHETICS» or from «SYNTHETICS» to
«WOOLLENS», etc.).
If you turn the programme selector to
a different textile, the progress cycle light
which is lit at the time, and the display
flash for a few seconds to indicate that
such an alteration is prohibited and will
not be effected.
To change the type of fabric during the
cycle, you must cancel the current
programme and then programme a new
cycle.
• However, you can change the washing
temperature at the start of the washing
phase for the same type of textile.
The time remaining will then be adjusted
accordingly.
• You can also change the spin speed
throughout the cycle.
• You can select «Drip-dry» and «Full drum
stop» up to the end of rinsing (until the
cycle progress light « » goes out).
• You can change the period for a «delayed
start» period throughout the whole of the
waiting period, right up to the effective
cycle starting time.
If you wish to cancel «Delayed start»
during this period, set display to «0»
and then briefly press button « ».
The cycle will then start immediately.
• You can only activate option « »
(Prewash) during the waiting period for a
«Delayed start».
• You can activate option « » (Rinse plus)
up to the point that rinsing commences
(until cycle progress light « » illuminates)
• You can only modify the options “ ”
(Easy ironing), « » (Eco) and « »
(Intensive) during the waiting period for a
«Delayed start».
• You can deactivate all the options at any
time during the cycle provided that the
particular action has not already been
completed.
2
A
A
B
1
2
Modifying a washing programme
Automatic safety systems
Programmes for tests according to European Directive EEC/95/12 - Characteristics
Cotton - 60°C – 6Kg – duration 2h 19 min – power 1.14 kWh – water 48 l – no options – max. spin.
Characteristics: 230V – 50 Hz – 10A – 2200W.
«Filt» message:
After a certain number of cycles, your
machine (depending on the model) will warn
you that you should clean the pump filter
At the end of the cycle, the display flashes
and then shows:
This message disappears when you
programme a new cycle.
If you do not clean the pump filter
regularly, this will affect your machine’s
performance.
Cleaning the pump filter
:
First of all drain the machine and then
disconnect the plug (Fig. 7)
- Remove the plinth and place a floor cloth
and a flat container under the access to the
pump.
- If your machine is fitted with one, remove
the purge hose.
- Open the stopper at the end of the hose and
let the water flow into the container.
- Close the stopper, ensuring that it is pushed
in well and reclip it in place.
- Unscrew the stopper for the drain pump’s
filter.
- Clean the filter. To re-insert it, snap it in by
orienting the small lug on the cylindrical
surface upwards and screwing the stopper
in fully.
- Re-install the plinth in its original position.
When you next wash, check that there are
no leaks during filling.
When there is a risk of frost: Drain the drain
circuit as shown above.
Cleaning the machine
• Only use a sponge, liquid soap and water to
clean the casing, the entry to the drum, the
control panel and the products’ box, etc.
• Never use: abrasive powders, metal or
plastic sponges, alcohol-based products,
thinners, etc.
Cleaning the products’ box
- Pull the knob forward (
Fig. 8 ➀
), and lift the
box out (
Fig. 8 ➁
),
- Clean everything with warm water, not
forgetting to wash the removable siphon
(blue). Check that you have replaced it
correctly.
- Then re-insert the whole box, checking that
it is positioned correctly.
Regularly check: The condition of the water
supply and drain hoses. If you notice the
slightest cracking, do not hesitate to replace
them.
Replacing the water supply hose: When
changing, check that the hose is tight and that
there is a seal on both ends.
Removing the drum’s paddle:
If an item of washing falls between the drum
and the side of the tub, empty the drum and
close it.
- Turn the drum until the paddle locks.
- Unscrew the screw between the two
openings (stamped TORX. T20) and remove
it. The paddle will fall into the drum (use a
terry towelling towel to cushion its fall as a
precaution).
- Turn the drum back and open it.
- Recover the fallen item through the holes
revealed by removing the paddle.
- To refit the paddle, slip it from front to back
over its support.
- Close the drum and turn it. Hold the paddle
while you re-insert the screw.
Cleaning the drying filter:
Clean this after every drying operation:
- Remove the filter from its housing (on the
right, near to the opening for the drum) and
pull it towards you.
- Clean it dry, removing any fluff it may have
caught.
- Replace it in its housing, pushing it in fully.
A
24
EN
8
➀
➁
➀
➁
➂
7
Running maintenance
25
EN
To keep your appliance in good working order, we recommend that you use Clearit household products.
Professional expertise for the general public
Clearit offers you professional products and adapted solutions for the daily upkeep of your household
and kitchen appliances.
You may find them in conventional retail outlets, along with a complete line of by-products and
consumables.
Possible causes / Remedies
The cycle does not start (1 and 2)
• You have not pressed the «Start /Pause»
button.
• There is no power to the machine:
- Check that the plug is correctly in the
socket.
- Check the circuit breaker and the fuses.
• The water tap is shut off.
• The machine’s lid is not closed properly
.
Heavy vibration during spin (1 and 2)
• Your machine has not been correctly
released:
- Check that all the transport material has
been removed (see «RELEASING»).
• The floor is not horizontal.
• Your machine is not stable on its four feet
(see «LEVELLING»).
The washing is not spun or is insufficiently
spun (1 and 2)
• You have selected a programme with no
spin, for example «Drip-dry».
• The spin safety system has detected poor
distribution of the washing in the drum:
- Untangle the washing and programme a
new spin.
The machine does not drain (1 and 2)
• You have programmed «Full drum stop».
• The pump or the drain filter is blocked:
- Clean them (see «RUNNING
MAINTENANCE»).
• The drain hose is kinked or squashed.
You wish just to wash but a drying cycle
starts automatically (2)
• You have programmed a drying cycle.
The lid does not open (1 and 2)
• The programme has not yet finished.
The lid remains locked throughout the
programme.
The drying cycle does not start (2)
• You have not selected a drying time.
Points to be checked in the event of an incident occurring:
Possible causes / Remedies
The drum doors open too slowly (depending
on the model)
• Your machine has not operated for a long
time.
• It is located in too cold a position.
• Detergent residue (powder) is blocking the
hinges.
- In all cases, everything returns to normal
once the doors have opened initially.
A pool of water forms around the machine (1
and 2)
First of all remove the electrical plug from the
socket and close the water tap. Then check
whether:
• The drain hose bracket is wrongly
positioned in the drain pipe.
•The water hose’s connections to the
machine and the tap are properly
watertight:
- Check that the seals are in place and the
connections are tight.
Foam overflows (1 and 2)
• You have used too much detergent.
• You have not used a detergent designed for
washing machines:
- Drain and then programme several rinses.
Then restart the washing programme.
The washing is not as dry as you wish (2)
• The drying programme selected is not
suitable for the type of textile placed in the
machine (Pay attention to the information
provided on the labels sewn on the clothes).
• The drying time selected is not suitable:
- For the level of dryness desired: increase
or reduce the drying time accordingly.
• The load of dried washing is greater than
the maximum authorised load (see
“PROGRAMMES TABLE”).
• The washing to be dried has not been spun
sufficiently.
Incidents that may occur
(1)
Washing machines
(2)
Washer-dryers
26
EN
Filling fault. Check that the water tap is open, then press the « »button
again to restart the cycle.
In this section, we will explain how you can repair these incidents very easily yourself.
Your appliance detects some operating faults by itself and indicates these by specific messages
that appear on the display.
Incidents indicated on the display, which you can repair yourself
Incidents shown which require a breakdown engineer
If you are unable to repair one of the above incidents yourself, call your breakdown engineer,
remembering to tell him the particular message displayed (d01, d02,...) to assist him in his task.
Check that the incident shown is not the type of incident you can repair yourself (see
above).
Your appliance also detects some operating faults which require intervention by a breakdown
engineer and indicates these by other messages, some examples of which we provide below..
Message
etc...
When one of the above messages appears, remember to note down the message displayed
carefully so that you can tell your breakdown engineer to assist him in his task.
NB – Before calling your breakdown engineer, we recommend that you do the following:
-
Release the ”Start/Stop” button and disconnect the plug for at least 10 seconds.
-
Reconnect the plug and restart a washing cycle.
If the fault displayed persists, call your breakdown engineer.
WARNING: Do not restart a washing cycle when the drum is locked or if you notice water
around your machine or also if you notice a burning smell.
Message Possible causes / Remedies
Draining fault. Clean the pump filter (see the chapter on «CLEANING THE
PUMP FILTER» for the procedure), then press the « »button again to
restart the cycle.
Drum rotation fault. After switching the machine off, check whether an item of
washing or an object has slipped between the drum and the side of the tub,
causing a blockage (see the section on «RUNNING MAINTENANCE»: removing
the drum’s paddle” for details on how to access the bottom of the tub).
Locking fault. Check that the lid is closed correctly, then press the « »
button again to restart the cycle.
Maintain the pump filter (for washing machines only). Check that the pump’s
filter is clean and clean it if necessary (for how to do this, see the section on
“RUNNING MAINTENANCE: Cleaning the filter”).
After-Sales service
Any work on your machine must be performed either by your dealer or by a qualified electrician
approved by the manufacturer or his agent.
When you call, cite your machine’s complete reference (model, type and serial No.). This
information is shown on the information plate fixed to the rear of your machine.
Brandt Appliances - SAS au capital de 10.000.000 euros, RCS Nanterre sous le n° B 440 302 347
B0282-A 04/05
Translation agency ALIZÉ Traduction
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Brandt WTE1573D Owner's manual
- Category
- Washing machines
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Groupe Brandt WTD1076K Owner's manual
-
Groupe Brandt WTE1577K Owner's manual
-
-
-
-
-
-
-
Brandt WTC9680 User manual
-