Öhlins Front Fork Kit for Yamaha WR450F
FGYA 1084
Application Specific Mounting Instructions
Issued 2009-11-11
Kit Contents (application specific)
Recommended Tools (application specific)
Hydraulic Stop Cup
Set-Up Data
Spring Recommendation
Part No. Pcs.
Front Fork kit FGYA 1084 1
Base plug (with o-rings) 15430-08 2
Spacer 2 mm 15443-02 8
Hydraulic Stop Cup 15456-05 2
Spring Support washer 15450-02 2
OEM Fork Cap Tool, socket 19 mm
Allen key for OEM Base Plug 14 mm
Socket for Öhlins Base Plug 22 mm
FGYA 1084 cartridge kit comes with a Öhlins Hydraulic Stop
Cup and a Spring Support Washer. Stop Cup shall be installed
according to step 10 and Support Washer according to step 12
in “Owner’s Manual and General Mounting Instructions”.
Rebound Damping 15 clicks
Compression Damping 15 clicks
Spring Preload 0 mm
Fluid Volume (each leg) 0,340 litre
Cartridge Kit FGYA 1084 shall be used together
with Öhlins Front Fork Springs part no. 08763-xx. For rate
recommendations, see Owner’s Manual/ General Mounting
Instructions.
Note!
The fork springs need to be ordered separately depending on the
rider’s choice of spring rate.
Part No. Pcs.
Circlip 15440-01 2
Öhlins Sticker 00197-01 2
TTX Cartridge Sticker 00191-29 2
Spring preload range -2 to 8 mm
(can be adjusted by adding/removing washers 15443-02)
Fluid volume range (each leg) 0,300 - 0,450 litre
Öhlins Front Fork uid 01312-01
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Ohlins FGYA1284 Mounting Instruction
-
-
-
-
-
-
-
-
-