Hilti DX 351 User guide

Hilti
Brand
Hilti
Model
DX 351
Type
User guide

Hilti DX 351 is a versatile gas-powered fastening tool designed for driving nails into a variety of materials, including concrete, steel, and wood. It features a powerful motor that can drive nails up to 65 mm in length, making it ideal for heavy-duty applications. The DX 351 also boasts a compact and lightweight design, allowing for easy maneuverability and reduced user fatigue. With its adjustable power settings and depth control, this tool provides precise and consistent fastening results.

Hilti DX 351 is a versatile gas-powered fastening tool designed for driving nails into a variety of materials, including concrete, steel, and wood. It features a powerful motor that can drive nails up to 65 mm in length, making it ideal for heavy-duty applications. The DX 351 also boasts a compact and lightweight design, allowing for easy maneuverability and reduced user fatigue. With its adjustable power settings and depth control, this tool provides precise and consistent fastening results.

WARNING
Under certain circumstances, the tool could be
made ready to fire by pulling back the magazine,
fastener guide or the fastener by hand.
When in the „ready for fire“ state, a fastener or
the piston could be driven into a part of the body.
For this reason, never pull back the magazine,
fastener guide or fastener by hand.
When using pins longer than 32mm, the tip of the
nail can protrude from the magazine. Never hold
the tool from the magazine or pull back from it
•
•
•
•
AVERTISSEMENT
En utilisant la main pour ramener en arriére le
chargeur, le canon ou l'élément de fixation, il
arrive que l'appareil se retrouve ainsi armé.
Lorsque l'appareil est ainsi armé, votre corps
n'est pas à l'abri d'une perforation.
Ne jamais utiliser la main pour ramener en arriére
le chargeur, le canon ou des éléments de fixation.
Lors de l’utilisation de clous de longueur
supérieure à 32mm, la pointe du clou peut
dépasser du magazine. Ne tenez jamais l’outil
par le magazine. Ne tirez jamais sur le magazine
•
•
•
•
ADVERTENCIA
Bajo determinadas circunstancias, la herramienta
se puede preparar para functionar al retirar el
cargador, el guía clavos o los clavos con la mano.
En el estado „listo para disparar“ el clavo podría
estar dentro deÌ cuerpo de la herramienta.
No empuje nunca el cargador, guía clavos o
clavos con la mano hacia atrás.
Al utilizar clavos de longitud mayor a 32mm, la
punta del clavo puede salir levemente del
cargador. Nunca sostenga la herramienta por el
cargador o jale del cargador.
•
•
•
•
AVISO
Em certas circunstâncias, a ferramenta pode estar
pronta para disparar ao, manualmente, puxar para
trás o carregador, guia cavilhas ou prego.
Caso esteja no modo „pronta a disparar“ pode
ocorrer um disparo contra qualquer parte do corpo.
Nunca puxe para trás (manualmente) o
carregador, guia cavilhas ou prego.
Ao usar pinos com mais de 32mm, a ponta do
prego pode protrair da carregador. Nunca segure
a ferramenta da carregador ou puxar o
carregador.
•
•
•
•
332581-08.2017
Printed: 08.08.2017 | Doc-Nr: PUB / 5367776 / 000 / 00
  • Page 1 1

Hilti DX 351 User guide

Hilti
Brand
Hilti
Model
DX 351
Type
User guide

Hilti DX 351 is a versatile gas-powered fastening tool designed for driving nails into a variety of materials, including concrete, steel, and wood. It features a powerful motor that can drive nails up to 65 mm in length, making it ideal for heavy-duty applications. The DX 351 also boasts a compact and lightweight design, allowing for easy maneuverability and reduced user fatigue. With its adjustable power settings and depth control, this tool provides precise and consistent fastening results.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents