Easylife Silent Wall Clock Operating instructions

Silent Wall Clock with light

QUICK START MANUAL

.7064

SAFETY INSTRUCTIONS

HOUR SETTING

LIGHTING SETTING

Technical specification:

WHEN HANGING THE CLOCK PLEASE NOTE THE FOLLOWING.

Caution - Before drilling any holes in walls or other surfaces, check the location

of any piping or electrical cabling.

1.The device is intended exclusively for private and not for commercial use. Only use this device as

describe in this instruction manual.

2.Do not use outdoors.

3.Keep it away from heat sources such as radiators, to avoid deformation of plastic parts.

4. Do not use coarse or abrasive sponges/cloths or steel wool to clean the appliance.

1. Choose a location that is not in direct sunlight or subject to higher heat

2. Ensure you check the wall and hanging hook or screw (not included) are appropriate for the weight

of the product.

3. To hang the clock, insert the hanging hook or screw (not included) into the hanging hole at the back

of the clock or hang the clock on the hook/screw (not

included) from the rim of the case.

4.If in doubt consult a professional trader person.

1.Insert 1xAA battery observing the correct polarity indicated.

2.To set the time, rotate the “TIME SET KNOB” until the correct

time is reached.

Material: PS+ABS

1.Insert 3xAA battery observing the correct polarity indicated.

2. Button to “AUTO ” ,lights turn on if the surrounding is dark enough

3. Button to“on”,Turn on the lights

4. Button to“off” ,Turn off the lights

Measurement: D30.5xH6cm

BATTERY

TIME SET KNOB

AUTO

OFF