2. Fishbone Offroad
  3. FB21273

Fishbone Offroad FB21273 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Fishbone Offroad FB21273 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What size wrench is required for installation?
    What are the sizes of the spacers included in this kit?
    How many knobs are included in the kit?
FB21273
Universal for Utility Racks
Hi-Lift Jack Mount Kit
REQUIRED TOOLS
¾ Wrench
KIT CONTAINS
Spacer ½”
Spacer 1”
Spacer 1.5”
M12-1.75 x 100MM Bolt
M12-1.75 x 110MM Bolt with Lock Hole
M12 Split Lock Washer
M12 Flat Washer
Knobs
QTY
1
1
1
1
1
2
2
2
FB21273
Universal for Utility Racks
Hi-Lift Jack Mount Kit
2
1) MEASURE
Intstall the supplied M12 bolt (without hole)
and flat washer onto one side of your bed rack
(Side 1).
Install the 1” spacer onto the bolt followed by a
lock washer and nut.
Repeat this on the opposite side using the 1.5”
spacer (Side 2).
2) INSTALL JACK
Install Your Hi-Lift Jack on, with the bottom of
the jack, Side 2 of the vehicle followed by the
1/2” spacer.
Install both threaded knobs to secure your Hi-
Lift Jack to your bed rack.
SIDE 1
SIDE 2
SIDE 2
SIDE 1
/