Liebherr IXRFWB 3966 Prime Assembly And Installation Instructions

Liebherr
Brand
Liebherr
Model
IXRFWB 3966 Prime
Category
Fridges
Type
Assembly And Installation Instructions
Installation instructions Page 14
Multi-temperature wine cabinet EN
7085 665-03
EWTgb/gw 1683 / 2383 / 3583
14
EN
Scope of delivery
Labels
2 pc. - EWT 1683
4 pc. - EWT 2383
8 pc. - EWT 3583
Cover
Spacer
Spacer
Attachment bracket
Stabilising rail
2 pc.
Stabilising rail handle
Cover
2 pc.
2 pc.
Attachment bracket
5 pc.
2 pc.
Content
Scope of delivery .................................................................... 14
Appliance dimensions ............................................................14
Transporting the appliance .....................................................15
Installation dimensions ...........................................................16
Appliance venting ...................................................................16
Changing over door hinges ....................................................17
Installing the appliance ...........................................................20
Adjusting the door ..................................................................24
Appliance dimensions
Cover prole
Open-ended
spanner
Cover
Cover prole
A510 mm
B
EWT 16.. - 906 mm
EWT 23.. - 1233 mm
EWT 35.. - 1816 mm
C572 mm
D
EWT 16.. - 872 mm
EWT 23.. - 1218 mm
EWT 35.. - 1770 mm
E595 mm
F557 mm
G254 mm
H1100 mm
I115°
J
EWT 16.. - 26.5 mm
EWT 23.. - 7.5 mm
EWT 35.. - 27 mm
K
EWT 16.. - 7.5 mm
EWT 23.. - 7.5 mm
EWT 35.. - 19 mm
15
EN
Side view
View from above
Front view
Transporting the appliance
CAUTION
Danger of injury or damage as a result of incorrect transport!
- Transport the appliance in a packed condition.
- Transport the appliance upright.
- Do not transport the appliance without assistance.
WARNING!
An appliance which has not been built in can
topple over!
EWT 16.. - 7,5 mm
EWT 23.. - 7,5 mm
EWT 35.. - 19 mm
16
EN
Installation dimensions
Important note
In order to avoid any problems when installing the appliance
and to avoid damage to the appliance, the following conditions
must be complied with.
The kitchen unit must be aligned horizontally and
vertically!
Minimum wall thickness of the body of the unit = 16 mm.
In this area, the mains power cable comes out of the appliance
rear.
Free length of the mains power cable:
EWT 16..: 2000 mm
EWT 23..: 2000 mm
EWT 35..: 2800 mm
Choose the position of the socket considering these specifica-
tions.
The socket must not be situated behind the ap-
pliance and must be easily accessible.
A560 mm - 570 mm
Bmin. 550 mm
(recommended 560 mm)
C70 mm
D30 mm
E
EWT 16.. - 874-890 mm
EWT 23.. - 1220-1236 mm
EWT 35.. - 1772-1788 mm
Appliance venting
Important note
The clear ventilation cross-
section must be at least
200 cm² from the lower
ventilation opening right to
the upper one.
Types of air outlet
1
Directly above the appliance
2
Above the top unit
3
From the front of the top unit with decor grille
Important note
When using decor grilles, it must be taken into account
that the clear ventilation cross-section corresponds
to the sum of the individual openings in the grille.
A cut-out section of merely 200 cm² for installing the
ventilation grille is thus not sucient.
Amin. 200 cm²
Bmin. 500 mm
Cmin. 40 mm
Dmin. 500 mm
Emin. 40 mm
17
EN
Changing over door hinges
Door hinges should only be changed by a trained expert.
Changing the door hinges must be done by two people.
WARNING!
High door weight.
Danger of injury and damage to property.
Only complete the modification work if you
can lift a weight of 35 kg.
WARNING!
Risk of injury due to the door dropping out!
If the fastening parts are not screwed into
place firmly enough, the door may drop out.
This may lead to severe injuries. What is
more, the door may not close and therefore
the appliance may fail to cool properly.
1. Remove covers.
1.
2. Remove the transportation safety component.
2.
3. Remove seal.
3.
4. Remove cover.
4.
5.
5. Remove cover.
18
EN
6. Remove seal.
6.
7. Remove cover.
7.
11. Transfer the stop
to the opposite side.
11.
10.
10.
Remove the upper re-
taining bracket and transfer
to the opposite side.
9. Remove the door.
The door must now be
held secure by some-
body.
Carefully place the
door on a soft surface. 9.
CAUTION
Risk of injury if hinges fold!
- Leave hinges open.
8. Remove the transporta-
tion safety component.
8.
12. Remove
seal.
12.
13. Remove cov-
ers.
13.
19
EN
17.
14. Unscrew hinges.
14.
15. Unscrew the attachment plates from the hinges and resecure
them to the other relevant hinge (the "Top" attachment plate must
remain at the top + the "Bottom" attachment plate at the bottom).
Re-fit the hinges on the opposite side of the door at diagonals to
the original position.
15.
16. Screw on covers.
16.
17. Fit the covers.
18. Fit seal. 18.
19. Fit the covers.
19.
20
EN
20. Fit seal.
20.
21. Fit the door on the appliance.
Notice
The door must now be held secure by
somebody.
21.
Check that the door is
securely fitted to the
appliance and closes
properly.
22. Fit covers and click into place.
22.
Installing the appliance
Note
Check the installation dimensions before installation.
The intermediate panel and side wall of the kitchen unit must be
perpendicular to each other.
The installation work should only be carried out by trained personnel.
Two people are required for the installation work.
WARNING!
Fire hazard due to dampness!
If live parts or the mains power cable be-
come damp this may cause short circuits.
- The appliance is designed for use in en-
closed areas. Do not operate the appliance
outdoors or in areas where it is exposed to
splash water or damp conditions.
- Only use the appliance when it is installed.
1. EWT 3583 - Remove
the transportation safety
component.
1.
2. Route the mains cable towards the socket.
3. Slide the appliance two-thirds of the
way into the kitchen unit.
When sliding in the appliance, make sure
that the mains cable is not damaged.
WARNING!
Fire hazard from short-circuiting!
- When pushing the appliance into the re-
cess, take care not to crush, jam or damage
the mains power cable.
- Do not operate the appliance with a defec-
tive mains power cable.
3.
21
EN
4.
4. Screw in the adjustable feet as far as they will go. 6. Remove the transportation safety component.
6.
5. Fit cover profile.
On appliances with
hinges on the right
On appliances with
hinges on the left 5.
7. Only if the wall thickness is less than 19 mm:
Fit the spacers.
16 mm
19 mm
7.
8. Remove cover.
8.
22
EN
42 mm
13. Slide the appliance fully into the recess.
Check that the distance is identical all the way round.
• Undothescrews1.
• Slidebrackettowardstheunit
wall.
• Tightenthescrews1.
13.
14. Adjust appliance via the adjustable feet, see section entitled
"Adjusting the door", page 24.
14.
10. Screw on the attachment
bracket.
10.
12. Remove edge protection.
12.
9.
9. Screw on the attachment bracket.
11.
11. Fit cover profile.
23
EN
16.
16. Snap off and remove the front part of the stop bracket.
15. Secure the appliance to the kitchen unit using screws
through the hinges and attachment brackets.
15.
17.
17. Fit the covers.
18. Stabilise the appliance at the back at the bottom:
Fit the handle 1 to the stabilising rail 2 and slide the
stabilisingrailintotheooroftheappliance.
Remove the handle and repeat this procedure with the second
stabilising rail.
18.
24
EN
20. Remove cover.
20.
21. Remove the transporta-
tion safety component.
21.
19.
19. Remove seal.
Installation is now complete.
Check that the door is securely fitted to the appliance and
closes properly.
22. Screw on the cover.
22.
23. Fit cover.
23.
24. Fit seal.
24. Fit cover
profile.
Adjusting the door
1. Remove seal.
1.
25
EN
2.
2. Remove covers.
3.
• Removescrews1.
• Transfertoposition2.
• Undoscrews3.
• Adjustclearance.
• Tightenscrews1 and 3.
3.
4. Fit the covers.
4.
6. Adjust the clearance in Z direction.
6.
5.
5. Fit seal.
Liebherr Hausgeräte Lienz GmbH
Dr.-Hans-Liebherr-Strasse 1
A-9900 Lienz
Österreich
www.liebherr.com *708566503*
Installation Guide
Quality, Design and Innovation
home.liebherr.com/fridge-manuals
Contents
1 General safety instructions.................................. 2
2 Installation conditions.......................................... 3
2.1 Location......................................................................... 3
2.2 Installing multiple appliances.................................... 3
2.3 Mains connection......................................................... 4
3 Appliance dimensions........................................... 4
4 Recess dimensions................................................ 5
4.1 Internal dimensions..................................................... 5
5 Ventilation requirements...................................... 7
6 Custom panel weights.......................................... 7
6.1 Weight............................................................................ 7
7 Water connection*................................................ 7
7.1 Dimensions for the water connection...................... 7
7.2 Water pressure............................................................. 7
8 Transporting appliance......................................... 8
9 Unpacking the appliance...................................... 8
10 Setting up the appliance....................................... 8
10.1 After installation.......................................................... 8
11 Disposing of packaging......................................... 8
12 What the symbols mean....................................... 8
13 **** freezer compartment door*.......................... 9
13.1 Moving the door hinge................................................ 9
14 Reversing the door................................................ 10
15 Connecting the appliance to the water supply*.. 11
15.1 Connecting the hose................................................... 12
15.2 Checking the water system........................................ 12
16 Installing the appliance in the recess.................. 12
17 Cabinet fronts....................................................... 19
17.1 Dimensions.................................................................... 19
17.2 Mounting the cabinet front(s).................................... 20
17.3 Setting the clearance to avoid collision................... 20
18 Water tank*........................................................... 20
18.1 Inserting the water tank............................................. 20
19 Water filter*.......................................................... 20
19.1 Inserting the water filter............................................. 21
20 Connecting the appliance to the power supply.... 21
The manufacturer is continually working on the further
development of all types and models. Please be aware that
we reserve the right to make changes to the shape, equip‐
ment and technology.
Symbol Explanation
Read instructions
Please read the information in these instruc‐
tions carefully to understand all of the benefits
of your new appliance.
Symbol Explanation
Full instructions on the internet
You can find detailed instructions on the
internet using the QR code on the front
of these instruction or by entering the
service number at home.liebherr.com/fridge-
manuals.
The service number can be found on the serial
tag:
Fig. Example illustration
Check appliance
Check all parts for transport damage. If you
have any complaints, please contact your
agent or customer service.
Differences
These instructions apply to a range of models,
so differences are possible. Sections that
apply to certain models only are marked with
an asterisk (*).
Instructions and results
Instructions are marked with a .
Results are marked with a .
Videos
Videos about the appliances are available on
the YouTube channels of Liebherr-Hausgeräte.
1 General safety instructions
-Please keep this assembly manual in a safe
place so you can refer back to it at any
time.
-If you pass the appliance on, please hand
this assembly manual to the next user.
-Read this assembly manual carefully before
installation and use to ensure safe and
correct use of the appliance. Follow
the instructions, safety instructions and
warning messages included at all times.
They are important for ensuring you can
operate and install the appliance safely and
without any problems.
-First read the general safety instructions in
the “General safety instructions” section of
the operating instructions, which accom‐
pany these installation instructions, and
follow them. If you cannot find the
operating instructions, you can down‐
load the operating instructions from the
internet by entering the service number
at home.liebherr.com/fridge-manuals. The
General safety instructions
2 * Depending on model and options
service number can be found on the serial
tag:
-Observe the warning messages and other
detailed information in the other sections
when installing the appliance:
DANGER identifies a situation involving
direct danger which, if not obvi‐
ated, may result in death or severe
bodily injury.
WARNING identifies a dangerous situation
which, if not obviated, may result
in death or severe bodily injury.
CAUTION identifies a dangerous situation
which, if not obviated, may result
in minor or medium bodily injury.
NOTICE identifies a dangerous situation
which, if not obviated, may result
in damage to property.
Note identifies useful instructions and
tips.
2 Installation conditions
WARNING
Fire hazard due to dampness!
If live parts or the mains lead become damp this may cause
short circuits.
uThe appliance is designed for use in enclosed areas. Do
not operate the appliance outdoors or in areas where it is
exposed to splash water or damp conditions.
Intended use
-Install and use the appliance in indoor spaces only.
-Use the appliance only once installed.
2.1 Location
WARNING
Leaking coolant and oil!
Fire. The coolant contained in the appliance is eco-friendly,
but also flammable. The oil contained in the appliance
is flammable. Escaping coolant and oil can ignite if the
concentration is high enough and in contact with an
external heat source.
uDo not damage the pipelines of the coolant circuit and
the compressor.
-If the appliance is installed in a very humid environment,
condensation can build up on the outside of the unit.
Always ensure good airlow and ventilation in the installa‐
tion location.
-The more refrigerant there is in the appliance, the larger
the space that it is installed in must be. If the space is
too small, any leak may create a flammable mixture of
gas and air. For every 8 g of refrigerant, the installation
space must be at least 1 m3. Information regarding the
coolant can be found on the serial tag inside the appli‐
ance.
2.1.1 Supporting floor
-The floor of the installation site must be horizontal and
even.
-If you are installing the unit in a cabinet standing on an
uneven floor: level the cabinet.
2.1.2 Positioning
-Do not install appliance in direct sunlight or next to an
oven, radiator or similar.
-Only fit the appliance into solid kitchen units.
Note
Please contact Customer Services to acquire a kit to limit
the door opening angle to 90° for appliances with soft close
mechanisms.*
2.2 Installing multiple appliances
NOTICE
Risk of damage due to condensate!
uDo not install the appliance directly alongside a further
refrigerator/freezer.
NOTICE
Risk of damage due to condensation!
uDo not install the appliance directly above another refrig‐
erator or freezer.
These appliances are designed for a variety of installation
options. Combine appliances only if the appliance is suit‐
able. The following table shows the installation options by
model:
Installation
option
Model
Single All models
Side-by-side
(SBS)
Model names starting with S....
Stacked Models up to a maximum recess height of
880 mm and with a heated cover can be
“stacked”.
Upper appliance: up to a maximum recess
height of 140 mm
Fig. 1
Build each appliance into a separate recess.
Installation conditions
* Depending on model and options 3
2.3 Mains connection
WARNING
Danger of fire due to incorrect positioning!
If the mains cable or plug touches the back of the appli‐
ance, the vibration can damage the mains cable or the plug
resulting in a short circuit.
uMake sure the mains cable is not trapped under the appli‐
ance when you position the appliance.
uStand the appliance so that it is not touched by connec‐
tors or main cables.
uDo not connect any appliances to sockets in the area of
the back of the appliance.
uDo not place and operate multi-sockets/power distribu‐
tors and other electronic devices (such as halogen trans‐
formers) at the back of the appliances.
3 Appliance dimensions
Fig. 2
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
ICB/c/bi/ci 51..2
559 546 1770
549
15
IC/c/d/e 51..3
S/ICN/c/d/e/h 51..3
S/ICN/ci/di 51..3
ICBN/ci/di 51..3
ICBN/h 51..3
IC/B/N/bsci 51..
IKG 51Ve03 / IKGN
51Vc03 / IKGN
51Ve03
695
Fig. 3
Appliance dimensions
4 * Depending on model and options
A (mm) B (mm) C (mm)
IFNd 35..
IFNbi/ci 35..
559 546
712
IR/bi/ci 39..
IR/c/d/e 39..
SIBai 39..
SIBa20i 39..
S/IF/N/d 39..
S/IFN/ci 39..
872
IRd 40..
IRBc 40..
IRBbi 40..
1022
IR/d/e 41..
IRB/c/d/i 41..
IRB/bi/ci/ 41..
IRBbsbi 41..
SIFNdi 41..
1213
IRd 45..
IRBc 45..
IRB/bi/ci 45..
IRBbsbi 45..
SIFNdi 45..
1395
IRBdi 48.. 1572
IR/d/e 51..
IRD/di 51..
IRB/d/h 51..
IRB/ci/h 51..
IRBbsci 51..
IRBP/ci/di 51..
IRBPbsci 51..
SIFN/e/h 51..
SIFN/di 51..
SIFNbsdi 51..
IK 51Ve00 / IK
51Ve01 / IKB
51Vc50i / IKB
51Vc51i
1770
4 Recess dimensions
4.1 Internal dimensions
Fig. 4 *
M1): Only for IRBci 5180 / 5182, ICBN/ci/cx/di/h 5163 /
5173 / 5183, ICN/ci/cx 5173, SIFN/di/dx/h 5188*
Recess dimensions
* Depending on model and options 5
F (mm)*G
(mm)*
H (mm)*J
(mm)*
L
(mm)*
IFNd 35..
IFNbi/ci
35..
714
-730
560 —
570
min.
550,
recom‐
mended
560
min.
500 max. 19
IR/bi/ci
39..
IR/c/d/e
39..
SIBai 39..
SIBa20i
39..
S/IF/N/d
39..
S/IFN/ci
39..
874 —
890
IRd 40..
IRBc 40..
IRBbi 40..
1024 —
1040
IR/d/e 41..
IRB/c/d/i
41..
IRB/bi/ci/
41..
IRBbsbi
41..
SIFNdi 41..
1216 —
1236
IRd 45..
IRBc 45..
IRB/bi/ci
45..
IRBbsbi
45..
SIFNdi 45..
1397 —
1413
IRBdi 48.. 1574 —
1590
F (mm)*G
(mm)*
H (mm)*J
(mm)*
L
(mm)*
IR/d/e 51..
IRD/di 51..
IRB/d/h
51..
IRB/ci/h
51..
IRBP/ci/di
/ 51..
IRBbsci
51..
IRBPbsci
51..
SIFN/e/h
51..
SIFN/di
51..
SIFNbsdi
51..
ICB/c/bi/
ci 51..2
IC/c/d/e
51..3
S/ICN/c/
d/e/h
51..3
S/ICN/ci/
di 51..3
ICBN/ci/d
i 51..3
ICBN/h
51..3
IC/B/
Nbsci 51..
IK
51Ve00 /
IK
51Ve01 /
IKB
51Vc50i /
IKB
51Vc51i /
IKG 51
Ve03 /
IKGN
51Vc03 /
IKGN
51Ve03
1772 —
1788
560 —
570
min.
550,
empfohl
en 560
min.
500 max. 19
The specified energy consumption was determined with a
kitchen unit depth of 560 mm. The appliance will work prop‐
erly at a kitchen unit depth of 550 mm, but at a slightly
higher energy consumption.
uCheck the wall thickness of adjacent cabinets: It must be
at least 16 mm.
uOnly fit the appliance into stable, solid kitchen units.
Secure the unit against tipping.
uAlign the cabinets with a spirit level and a try square. If
necessary, level them by putting something underneath
them.
uMake sure floor and the side panels of the cabinet are at
right angles to each other.
Recess dimensions
6 * Depending on model and options
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80

Liebherr IXRFWB 3966 Prime Assembly And Installation Instructions

Liebherr
Brand
Liebherr
Model
IXRFWB 3966 Prime
Category
Fridges
Type
Assembly And Installation Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers