onn.
Model: 100027812
USER MANUAL
The bat teries shal l not be ex posed to exc essive heat such as sun shine, fire or the lik e.
1-888-5 16-2630
Use an AUX cable (included) to connect the TV’s headphone Port to the
soundbar’s AUX IN port.
AUX cable length is 6 feet
Optical cable length is 6 feet
When there is no sound through an HDMI or OPTICAL connection,
please set the output of your TV or DVD to PCM.
Use an optical cable (included) to connect the TV’s OPTICAL OUT Port to
the soundbar’s OPTICAL Port.
Using the AUX or Optical Connection
Hints and Tips
This lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of non-insulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock.
Warning: To reduce the risk of electric shock, do
not remove cover (or back) as there are no user-
serviceable parts inside. Refer servicing to
qualified personnel.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance instructions
in the literature accompanying the appliance.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
Attention should be drawn to environmental
aspects of battery disposal.
The product is designed to use in moderate
climates.
IMPORTANT SAFETY INSTRUCTIONS
1.Read th ese instruc tions – All the safety and operatin g instructi ons should b e read befor e this prod uct is opera ted.
2.Keep th ese instruc tions – The safety and operating in structions should be re tained for f uture refer ence.
3.Heed al l warnings – All warnin gs on the a ppliance and in the ope rating instr uctions shou ld be adher ed to.
4.Follow all instruc tions – All operating a nd use instr uctions shou ld be follo wed.
5.Do not use this ap paratus near water – Th e appliance should not b e used near water or mo isture – fo r example, i n a wet
basement or near a s wimming pool , and the l ike.
6.Clean o nly with dr y cloth.
7.Do not block any v entilation o penings. In stall in acc ordance wit h the manufa cture’s inst ructions.
8.Do not install nea r any heat s ources such as radiator s, heat reg isters, stov es, or other apparatus (including a mplifiers) that
produce h eat.
9.Do not defeat the safety purpo se of the p olarized or grounding p lug. A polar ized plug h as two blade s with one w ider than t he
other. A grounding p lug has two blades and a third gro unding prong . The wide blade or the third prong is provide d for your s afety.
If the p rovided plu g does not fit into you r outlet, c onsult an e lectrician for replace ment of the obsolete o utlet.
10.Protec t the power cord from b eing walked on or pinch ed particul arly at the plugs, conve nience rece ptacles, and at the poi nt
where the y exit from the apparat us.
11.Only u se attachme nts/accessor ies specifi ed by the ma nufacturer.
12.Use on ly with the cart, stand , tripod, b racket, or t able specif ied by the m anufacturer, or sold wi th the appar atus. When a cart
or rack i s used, use caution whe n moving th e cart/appar atus combina tion to avo id injury fr om tip-over .
13.Unplug the appara tus during l ightning st orms or when unused for long period s of time.
14.Refer all servici ng to qualif ied personn el. Servicin g is require d when the apparatus ha s been dama ged
in any wa y, such as power supply cord or pl ug is damage d, liquid h as been spil led or objec ts have fal len
into the apparatus h as been expo sed to rain or moisture , does not o perate norm ally, or has been dropp ed.
15.CAUTIO N: These se rvicing inst ructions ar e for use by qualified service pers onnel only.
To reduc e the risk of electric shock, do n ot perform any servici ng other th an that con tained in t he operatin g
instruc tions unles s you are qu alified to do so.
16.Do not install th is equipment in a confi ned or build ing-in spac e such as a book case or similar uni t, and rema in a well
ventilat ion conditi ons at open site. The ventilation should not be impeded by covering the ventil ation openi ngs with it ems such
as newspa per, table- cloths, curt ains etc.
17.WARNIN G: Only use attachments /accessorie s specified or provided by the manu facturer (su ch as the e xclusive sup ply
adapter, battery etc ).
18.WARNIN G Please r efer the in formation o n exterior b ottom enclo sure for el ectrical an d safety in formation b efore insta lling or
operating the appara tus.
19.WARNIN G To reduc e the risk of fire or e lectric sho ck, do not expose this apparatus to rain or moisture. T he apparatu s shall
not be ex posed to dr ipping or sp lashing and that object s filled wi th liquids, such as vas es, shall no t be placed on apparatu s.
20.WARNIN G: The main s plug or ap pliance cou pler is used as disconne ct device, the disconn ect device s hall remain readily
operable.
21. This equi pment is a Class II or double insu lated electr ical applian ce. It has been designe d in such a way that it does not
require a safety con nection to e lectrical e arth.
small object
small object
a
1KKVRUUYKYSGRRY[HPKIZG]G_LXUS
_U[TMINORJXKT
Main unit
Subwoofer and Satellites Connection
Pairing the Subwoofer
When the soundbar is turned on, the devices will connect automatically;
If this does not happen, please pair the subwoofer to the soundbar manually.
Pair manually:
1. Press and hold mute on the remote for 7 sec., soundbar's LED display will show
SUB LINK;
2. Press and hold pairing button on subwoofer for 3 sec., the subwoofer's LED
will fast blink blue until paired with each other;
3. The soundbar connected subwoofer, Blue Led indicator on the subwoofer remain
solid and the LED dispaly on the front of the soundbar show LINKED 3s.
Connect Subwoofer and Satellites:
Connect the Satellite Speaker Ports between Subwwoofer and
Satellites Via RCA cables(included) like the following illustration.
Novembe r 23, 2020_V1
Using the HDMI IN or HDMI ARC connection
The best way to connect your soundbar is via HDMI/HDMI ARC, shown below:
Use DVD to connect via HDMI cable to sound bar HDMI IN. Sound bar connects to
TV via HDMI cable in HDMI ARC. Same on the TV HDMI ARC. Sound bar needs
to be on HDMI IN source. The screen shows HDMI IN.
.
DVD connects via HDMI cable to TV HDMI IN. Sound bar connects to TV via HDMI
cable in HDMI ARC. Same on the TV HDMI ARC. Sound bar needs to be on
HDMI ARC source. You should have audio and video. The screen shows HDMI ARC
HDMI cable (included) length is 6 feet
HDMI cable (included) length is 6 feet
Connect your soundbar to DVD or Game Console or
Network Media Player or Tablet/MP3 Player/Laptop.
HDMI IN
HDMI
HDMI
HDMI IN
HDMI ARC
HDMI ARC
HDMI ARC
HDMI IN
HDMI ARC
DVD
DVD
HDMI
IN
HDMI
ARC
LED Screen activity
Adjusting the Volume
LED Screen activity
AUX IN: the screen display"AUX”
Press VOL +/- on the unit or the remote control to adjust the
volume(Volume range Min to Max.), the screen shows
like VOL MIN,VOL 1, VOL MAX
Standby Mode
The soundbar will be in standby mode if no audio source input in 15 minutes.
You can press " " +"Vol+"+"Source" to turn off and turn on the auto power
standby(APS) mode.
If you wish to turn the sound off, press on the remote control,
the screen shows MUTING.Press again to resume normal listening.
Bluetooth mode: the screen display "BT"
Bluetooth is pairing: the screen display "PAIRING"
Bluetooth is paired: the screen display "PAIRED”
Bluetooth disconnected: the screen display "UNPAIR"
Optical: the screen display"OPTICAL"
HDMI IN: the screen display"HDMI IN"
HDMI ARC: the screen display"HDMI ARC"
Standby ON: the screen display"APS ON"
Standby OFF: the screen display"APS OFF"
Need help?
We’re here for you every day
from 7 a.m. – 9 p.m. CST.
Give us a call at 1-888-516-2630
We ‘d love to hear from you. Scan with your Walmart
app and let us know what you think.
November 23, 2020_V1
1. Button Switches the unit betwen ON and STANDBY modes.
2. Press AUX button, device will play audio from aux input.
3. Press OPTICAL button, device will play audio from optical input.
4. VOL+ button increases the volume.
5. button skip to previous track in Bluetooth mode.
6. button to play/pause music in Bluetooth mode.
RESET button to reset device to the factory default settings.
7. VOL- button decreases the volume.
8. BASS- button decrease bass
9. TREB- button decrease treb
10. Press EQ button to select music, movie and talk EQ mode.
11. button mutes the unit or resumes the sound.
12. Press HDMI IN button, device will play audio
from HDMI IN input.
13. Press HDMI ARC button, device will play audio
from HDMI ARC input.
14. Bluetooth Connection switches to Bluetooth
mode, press and hold to enable bluetooth pairing if
there is an existing connection then disconnect the
devices, unit will enter pairing mode.
15. button skip to next track in Bluetooth mode.
16. BASS+ button increase bass
17. TREB+ button increase treb
1
2
3
5
6
4
7
8
9
11
10
12
13
14
16
15
17
HDMI
IN
HDMI
ARC
Get to Know Your 36'' 5.1 SOUNDBAR
5
10 11 12 13
4
6 7 8 9
1. Speaker
2. LED Indicator
3. Remote Control Sensor
4. LED Display
5. HDMI IN Port
6. HDMI ARC Port
7. OPTICAL Port
8. AUX IN Port
9. AC IN Port
10. Power Button
Switches the unit between
ON and STANDBY modes
11. SOURCE Button
Selects the input source
12. VOL- Button
Decreases the volume
13. VOL+ Button
lncreases the volume
Get to Know Your 36'' 5 .1 SOUNDBAR
What’s in the Box? Check to make sure you
have everything below.
HDMI
IN
HDMI
ARC
AAA
AAA
12
109876
13
11
36“ 5.1 SOUNDBAR
100027812
36 5.1 SOUNDBAR
Using the Bluetooth Connection
When unit power on, press on soundbar change to Bluetooth mode,
"BT" is lighting on the LED display;
When unit power on, press on remote control change to Bluetooth mode,
"BT" is lighting on the LED display;In this mode, if long press 3 seconds,
will clear previous paired devices and goes to pairing mode,the LED display
will show "PAIRING";
Select the Bluetooth search function on your device,your device should
discover the soundbar which is called onn. 36" 5.1 Soundbar;
Select onn. 36" 5.1 Soundbar, your device is paired with the soundbar when
LED display shows "PAIRED";
When Bluetooth connects successfully, the LED display shows "BT" for a
while and then changes to "- -";
After the soundbar and your device are paired, you can stream music from
your device to the Soundbar.
Bottom view of the unit
To the Power outlet
)UTTKIZZNK')/4VUXZZUZNKVU]KXU[ZRKZH_VU]KXIGHRK
Power Cord length is 4.6 feet
Subwoofer
To the Power outlet
Power Cord length is 4.6 feet.
Main bar: 914mm(W) x 65mm(D) x 80mm(H)
Subwoofer: 200mm(W) x 300mm(D) x 300mm(H)
Satellite: 80mm(W) x 65mm(D) x 240mm(H)
100027812
AC IN Input AC 100~240V 60Hz
400W
7.9 Kg
100W
Manufactured under license from Dolby Laboratories. Dolby,Dolby Audio, and the double-D symbol
are trademarks of Dolby Laboratories.
1. Main unit
2. Subwoofer
3. Satellite Speaker x 2
4. AAA Battery x 2
5. Remote Control
6. Power Cord x 2
7. AUX Cable x 1
8. RCA to RCA Cable x 2
9. HDMI Cable x 1
10. Optical Cable x 1
11. QSG x 1
12. User manual x 1
13. Wall Mount Template
Rear View of Subwoofer Rear View of Satellites
AC 100~240V
Power Socket
ON/OFF Switch
Pairing
Satellite Speaker Port
Satellite
Speaker Port
L
R
L
R
Subwoofer
Satellite SpeakerSatellite Speaker
L
R
No power.
The remote control is
not functioning.
Loud hum or noise
is heard.
Use the remote control near the unit.
Point the remote control at the remote sensor
on the unit.
Replace the batteries in the remote control
with new batteries.
Remove any obstacles between the remote
control and the unit.
Ensure the Power cord is connected securely at both ends.
Make sure that the ON mode is selected.
The Plugs and sockets are dirty.Wipe them
with a cloth slightly and moistened with an
appropriate non-abrasive cleaning solution.
Plug the AC cord of subwoofer into the wall outlet
securely.
Connect the unit and the subwoofer.
Ensure the HDMI cable is connected securely.
Check if the HDMI cable is damaged.
Cannot find "onn.
36" 5.1 Soundbar"
on my Bluetooth -
device.
Ensure the Bluetooth function is activated on
your Bluetooth device.
Ensure you have paired your unit with the
Bluetooth device.
Sound is not produced.
No woofer sound.
HDMI connection cannot
be completed.
Need help? Customer Support: 1-888-516-2630 7am-9pm CST daily
Adjust the volume.
When you are using connection with a exteral
device(Bluetooth device ect.), adjust volume
level of the device.
Press mute button or adjust the volume level
to cancel the mute function.
Check the input source and select the correct
input source.
RCA to RCA cable length is 14.7 feet
power cord length is 4.6 feet
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.