Shenzhen Future Charger Technology HC01 User manual

Brand: Shenzhen Future Charger Technology

Model: HC01

Type: User manual

Shenzhen Future Charger Technology HC01 is a versatile device that combines wireless charging capabilities with a built-in heated cup function. Experience the convenience of powering up your compatible devices without the hassle of cables, while keeping your beverages warm at the same time.

Installation

1. Plug the power adapter into the socket.

2. USB cable 　connects the power adapter.

3. Put connects the USB-C Interface.

4. Put the device which supports wireless charging function on

the launch plate correctly. Indicator light changes to green from

blue if it starts to charge. The light will be blue if you remove the

mobile phone, which means the wireless charging pad enters in a

standby mode.

Please read the instructions before using the product

Constant warm cup

with wireless charger

User Manual

For mobile phone:

1. LED blue light: Standby

2. LED green light: Charging

3. Blue light ﬂashing: Mobile phone location in deviation or over

temperature protection or trigger FOD

For warm cup:

1. Green light breathing: the wireless charger is in thermal

insulation state

2. Blue light ﬂashing: after the continuous heat preservation

working time is more than 4 hours, enter the power saving mode

* The involved images are sketch maps , the ﬁnal product as per the material subjects.

Important notes

1. Please remove the protective case (except receiver case) when

charging, to keep high eciency. We suggest you use a 3A adapter for

the best results.

2. Do not disassemble the charger or throw it into ﬁre and water, to

avoid causing a short circuit leakage.

3. Do not use wireless charger in severely hot, humid or corrosive

environments, to avoid circuit damage and occurs leakage

phenomenon.

4. Do not place stu with magnetic strip or chip (ID card, bank cards,

etc ) on wireless charging pad to avoid magnetic failure.

5. Please keep the distance at least 20cm between implantable

medical devices (pacemakers, implantable cochlear,etc.) and the

wireless charger, to avoid potential interference with the medical

device.

6. Please take care of the children and ensure they won't play the

wireless charger as a toy, to avoid unnecessary accidents.

7. It is better the mobile phones or other related machines don’t set the

vibration mode,as the vibration will cause deviation and eect the

charging experience .

8. Please read the manuals calfully before charging,this product can

not be ensured to be compatible with the functions of all the machines.

Warranty

There is one year guarantee for this product unless anthropogenic

factor.

Packing List

Constant warm cup with wireless charger

User Manual

Type-c Cable

使用产品前，请阅读使用说明

* 说明书涉及图片均为示意图，最终产品以实物为准

使用说明

1. 将电源适配器插在插座上。

2. USB 连接适配器。

3. 将　插入USB-C接口

4. 将带有无线充电功能的设备正确放在发射板上，指示灯由蓝色灯变为

绿色灯表示开始充电，移开设备指示灯变为蓝色灯，表示无线充电板进

入待机模式。

65*90ＭＭ 128克铜板纸

Parameter speciﬁcation

Model: HC01

Input: 12V/1.5A

phone output: 15W Max

Warm cup: 18W Max

Eciency: ≥75%

无线充加热杯

用户手册

手机充电系统工作时指示状态与保护功能：

LED蓝灯常亮：无线充电器处于待机模式

LED绿灯常亮：无线充电器处于充电模式

LED蓝灯闪烁：无线充电器位置放偏或者过温保护或触发FOD

保温杯系统工作时指示状态与保护功能：

LED绿灯呼吸：无线充电器处于保温工作状态

LED蓝灯闪烁：连续保温工作时间大于4小时后，进入省电模式

参数规格

产品型号：HC01

输入电压/电流 : 12V/1.5A

手机输出 : 15W Ｍax

杯子输出 : 18ＷＭax

充电效率 : ≥75%

注意事项

1. 充电时请取下保护套（不包括接收器外壳），以保持高效率;我们建

议使用3A适配器获得最佳效果。

2. 请不要在通电状态下自行拆解或投入火中、水中，避免短路漏电。

3. 请不要在严重高温，高潮湿或腐蚀性环境下使用，避免损坏电路出现

漏电。

4. 请不要将带有磁条或者芯片的磁卡（身份证、银行卡等）放置在充电

板上，避免造成磁卡失效。

5.请保持植入医疗设备（心脏起搏器、植入式耳蜗等）和无线充电器之

间距离至少20cm之间，避免对医疗器械的潜在干扰。

6.照管好儿童，以确保他们不会将无线充电器当成玩具，避免不必要的

事故。

7.最好不要将手机或其他相关设备设置为振动模式，因为振动会导致偏

差，影响充电体验

8.充电前请仔细阅读说明书，本产品不能保证与所有机器的功能兼容。

质保

该产品正常使用下保修一年，人为损坏不在保修范围内

包装清单

无线充加热杯

用户手册

Type-c线

保温杯

无线充

指示灯

Warm cup

wireless charger

Indicator light

FCC Warning Statement: Changes or modifications to this unit not expressly

approved by the party responsible for compliance could void the user’s

authority to operate the equipment. This equipment has been tested and found

to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

FCC Radiation Exposure Statement

The antennas used for this transmitter must be installed to provide a separation

distance of at least 20 cm from all persons and must not be co‐located for

operating in conjunction with any other antenna or transmitter.

Shenzhen Future Charger Technology HC01 User manual

Brand: Shenzhen Future Charger Technology

Model: HC01

Type: User manual

Download PDF

report

in other languages

日本語: Shenzhen Future Charger Technology HC01 ユーザーマニュアル

Shenzhen Future Charger Technology HC01 User manual

Shenzhen Future Charger Technology HC01 User manual

in other languages

Related papers

Other documents