Franklin BT01 User manual

Type
User manual

Franklin BT01: Your Versatile Audio Companion

With its sleek design and powerful features, the Franklin BT01 is a must-have for music lovers and photography enthusiasts alike. This Bluetooth speaker not only delivers high-quality audio but also serves as a camera remote shutter and can even switch between selfie and keyboard modes. Enjoy a truly immersive music experience with stereo mode by pairing two Franklin BT01 speakers together.

Franklin BT01: Your Versatile Audio Companion

With its sleek design and powerful features, the Franklin BT01 is a must-have for music lovers and photography enthusiasts alike. This Bluetooth speaker not only delivers high-quality audio but also serves as a camera remote shutter and can even switch between selfie and keyboard modes. Enjoy a truly immersive music experience with stereo mode by pairing two Franklin BT01 speakers together.

Charging the battery:
Insert the charging cable into the Micro USB input port,
connect the USB plug into 5V USB power terminal.The
charging LED indicator will turn on.
After charging completed, the LED indicator will turn off.
Note: When music sound becomes smaller and you
hear the warning tone , please charge this speaker in
time.
Bluetooth pairing for music / phone call / camera remote shutter
a.Turn on the speaker by pressing" " button for 3
seconds.The speaker will have a voice prompt and blue
indicator will flash.
b. Stereo mode (only for two speakers):
Power on two Franklin BT01 . Double press " " on
one Franklin BT01 . Connected prompts are heard once
the speakers are paired successfully. After the first pairing,
the Franklin BT01 will automatically connect when you turn
them both on.
Turn on your device and activate the Bluetooth function.
Search for Bluetooth pairing name" Franklin BT01 " and
click to pair, the speaker will pair automatically and the
speaker will have a voice prompt, the blue indicator will
light on. Then, you just need to press " " button to
answer the call when the call is coming or take a photo
when open the camera of your devices.
Turn off the speaker by pressing " " button for 4
seconds and the speaker will have a voice prompt .
Double click " " button of the speaker to transfer
the selfie mode and keyboard mode(you will hear a
sound which like taking picture or keyboard). Under
selfie mode, one click to take a photo when open
Camera APP. ( If close Camera APP, continuous click
to up volume.) ; Under keyboard mode, one click to
Play / Pause.
Note: It is keyboard mode when open the speaker by
default.
Transfer between selfie mode and keyboard mode
Franklin BT01
Franklin BT01
Franklin BT01
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your
authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
FCC WARNING
  • Page 1 1
  • Page 2 2

Franklin BT01 User manual

Type
User manual

Franklin BT01: Your Versatile Audio Companion

With its sleek design and powerful features, the Franklin BT01 is a must-have for music lovers and photography enthusiasts alike. This Bluetooth speaker not only delivers high-quality audio but also serves as a camera remote shutter and can even switch between selfie and keyboard modes. Enjoy a truly immersive music experience with stereo mode by pairing two Franklin BT01 speakers together.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI