2. GTRS
  3. GWF4
GWF4

GTRS GWF4 User manual

  • Hello! I have reviewed the user manual for the GTRS Wireless Footswitch GWF4. This document provides instructions on how to pair the device with your GTRS guitar, switch between presets and banks, use the built-in tuner, and understanding of battery alerts. I'm ready to answer any questions you have about its features and operation.
  • How do I pair the GWF4 with my GTRS?
    How do I switch between preset banks in Control Mode 1?
    How to use a tuner?
WirelessFootswitch
www.gtrs.tech
www.gtrs.tech
GWF4
01
Toppanel
www.gtrs.tech
Four-channelfootswitchforswitchingbetweenpresetsandtogglingeffects
FootswitchLEDsindicatecurrentstatus
LEDdisplayscreenshowscurrentlyselectedpresetname
Pairing
PleasepairtheGWF4withyourGTRSbeforeusingitforthetime.
*Tip:OncethewirelessfootswitchispairedwithyourGTRSguitarsuccessfully,every
timeyouusetheGTRSguitarwithyourwirelessfootswitchtheywillconnect
automatically.IfyouswitchtoanotherGTRSguitar,pleaserepeatthepairingprocedure.
Controlmode1
Presetbankswitching:PresstheA&Bfootswitchessimultaneouslytoswitchfrom
bank0tobank9.PresstheC&Dfootswitchessimultaneouslytoswitchfrombank9to
bank0.TheleftblockoftheLEDscreenindicatesthenumberofthecurrentlyselected
bank.Whenswitchingpresetbanks,thebanknumberwillblink.Pressthedesired
footswitchtoconfirmpresetselection.TheLEDwillstopblinking.
Presetswitching:Pressoneofthefootswitchestoselectapresetfromthecurrent
bank.TheassociatedfootswitchLEDwilllightuptoindicatethecurrentlyselected
preset.TherightblockoftheLEDscreenindicatesthenameofthecurrentpreset.
Controlmode2
Presetswitching:PressfootswitchAtoswitchthroughpresets9D-0A.Pressfootswitch
Btoswitchthroughpresets0Ato9D.TheLEDscreenwillshowthecurrentlyselected
presetwhilethefootswitchLEDwillstayoff.
CTRL:FootswitchCorDcanbesettoaCTRLfunction.Inthisfunction,thestatusofthe
effectwithbeindicatedbytheLEDbeingon/off.WhensettoTAPcontrol,thefootswitch
LEDwillblinkoncewhenthefootswitchispressed.
低电量报警：当踏板电量较低时，踩钉灯会开始闪烁进⾏提⽰
控制模式通过APP来选择，出⼚默认模式1
A B CD
Toppanel
TurnontheGWF4.PressandholdtheA&Cfootswitchessimultaneouslytobeginpairing
(ThefootswitchLEDwillstarttoblink).
SelectthewirelessfootswitchbyclickingontheiconintheGTRSAPPtosearchfor
theGWF4.
WhentheGWF4isfound,theiconswillappearandthefootswitchLEDwill
stopblinking.
02 www.gtrs.tech
SidePanel
GTRSLOGO:ThecolorofthelogoLEDindicatesthebatterylifeoftheG.Greenindicates
30-100%battery,yellowfor15-30%batteryandredfor15%battery.ThelogoLEDwill
blinkwhilechargingandthecolordependsoncurrentbatterylife.
Type-CUSBport:ChargeyourGWF4usingaUSBType-Ccable.
PowerSwitch:AlltheLEDswillbeoffwhentheGWF4isoff.ThelogoLEDwilllightup
whentheGWF4isoffandcharging.
Tuner:ThetunercanbeaccessedbypressingandholdingtheGTRScontrolknoborby
pressingthewirelessfootswitchthathasbeenassignedtotheTUNERfunction.Inthe
tunermode,allofthefootswitchLEDswillbeoff.TheLEDscreenwillshowthecurrently
playingnote.Theleftblockofthescreenwillshowthenearestnote.Iftherightblock
displayrotatingclockwise,itmeanstheplayingnoteissharpandtheoppositeindicates
thepitchisflat.Whentherightblockdisplaystopsrotating,thenoteisatthecorrect
pitch.
Low-Batteryalert：When the battery is low, the footswitch LED will start to blink.
APPcontrol:ThecontrolmodeofG4canbeassignedthroughtheGTRSapp.Itissetto
ControlMode1asthedefault.
MadeinChina
www.gtrs.tech
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
/