Dometic Freeze Control Hang Tag For Air Conditioner Installation guide

  • Hello! I've reviewed the user manual for the Dometic Freeze Control. This document provides instructions on installing the control to prevent evaporator coil freezing. I can answer your questions regarding the installation process, key features, and other details about the product.
  • Where should the freeze control be installed?
    Which row of tubing should the control be attached to?
    How tight should the control be against the fins?
IMPORTANT
THIS DEVICE MUST BE
PROPERLY INSTALLED TO ENSURE ITS
PROPER OPERATION
This device helps prevent Unit Evaporator Coil from
freezing over during cooling operation.
1. Snap the freeze control in the bottom center of
the evaporator coil.
2. It must be snapped to the second row of tubing
just above the lip of the drain pan.
3. Face of freeze control must be tight against
fins. (Refer to illustration on back)
REVISION
Form No. 3104997.014 6/04
(Replaces 3104997.006
©2004 Dometic Corporation
LaGrange, IN 46761
See Reverse Side
Place Freeze
Control At Bottom
Center Of Evapora-
tor coil
Snap To Second
Tubing
Drain Pan
/